Lightweight Upright
VACUUM CLEANER
Household Type
Owner’s Guide
Z400 Series
IMPORTANT
For any advice and
to order filters and
accessories
on your cleaner,
please telephone
Customer Care
08706 055055
Index
Important Safeguards ............... 2
Service Information................... 4
Parts & Assembly .................. 5-6
Use & Dust Cup..................... 6-7
Brush Roll & Blockages ............ 8
Guarantee .............................. 10
www.electrolux.co.uk
IMPORTANT SAFEGUARDS
When using an electric appliance, basic precautions should always be follo wed, including
the following:
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER
WARNING
To reduce the risk of fire, electric shock, or injur y:
• Do not use outdoors or on wet surfaces.
• Do not leave vacuum cleaner when plugged in. Turn off the switch and unplug the
electrical cord when not in use and before servicing.
• Do not allow to be used as a toy. Close attention is necessary when used by or near
children.
• Use only as described in this manual. Use only manufacturer’s recommended
attachments.
• Do not use with damaged cord or plug. If vacuum cleaner is not working as it should,
has been dropped, damaged, left outdoors, or dropped into water, return it to a service
center before using.
• Do not pull or carry by cord, use cord as a handle, close a door on cord or pull cord
around sharp edges or corners. Do not run vacuum cleaner over cord. Keep cord
away from heated surfaces.
• Do not use extension cords or outlets with inadequate current carrying capacity.
• Turn off all controls before unplugging.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or vacuum cleaner with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free
of dust, lint, hair, and anything that may reduce airflow.
• This vacuum cleaner creates suction and contains a revolving br ush roll. Keep hair,
loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or
hot ashes.
• Do not use without dust cup or filter in place.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids such as gasoline, or use in
areas where they may be present.
• Store your cleaner indoors in a cool, dry area.
• Keep your work area well lighted.
• Unplug electrical appliances before vacuuming them.
Double Insulation
• Your vacuum cleaner is double insulated. This means that all external parts are
electrically insulated from the mains. This is done by placing insulation barriers
between the electrical and mechanical components, making it unnecessary for the
cleaner to be earthed.
2
SA VE THESE INSTRUCTIONS
BEFORE YOU START
CHECK THE VOLTAGE
First check the voltage shown on the data plate (see rear view) to make sure that the cleaner is of the
correct voltage for your electricity supply. If it is not, do not use the cleaner but refer back to your dealer.
CONNECTING TO YOUR ELECTRICITY SUPPLY
Permanently connected to the cleaner is a mains supply (2-core) cable fitted with a non-rewirable plug
incorporating a 5A fuse.
In the event of the fuse requiring replacement the fuse cover should be removed using a small screwdriver.
The old fuse MUST be replaced by a 5A ASTA approved BS1362 fuse or a BSI approved fuse. The cover
must be replaced before the plug is used again. In the event of loss of the fuse cover, replacements can
be obtained from your Electrolux Retailers and must be of the same colour as indicated by the coloured
insert on the base of the plug.
If difficulty is experienced in obtaining a replacement, contact Electrolux on 08706 055055.
In no circumstances must the plug be used without a correct fuse cover fitted.
If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the
appropriate plug fitted.
Remove the fuse from the cut off plug.
The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged
into a 13 amp socket in another part of your home.
The wires in the mains cable of this appliance are coloured in accordance with the following code: Blue:
Neutral. Brown: Live.
As the colours of the wires in the mains cable of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or
coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L
or coloured red.
If using a three-pin plug, do not make any connection to the terminal marked with the letter E or by the
earth symbol or coloured green or green-and-yellow. This cleaner is double insulated and no earth connection
is necessary.
It is in your interest to ensure that the plug is correctly attached to the mains cable. In case of doubt, have
it done by a qualified electrician, as Electrolux cannot regard the repair of faults on the plug connection
as a service that can be given free of charge under the terms of the guarantee.
Fuse Cover
5 Amp Fuse
Brown
Cord Clamp
Fuse
Blue
WARNING
If the mains supply cable becomes damaged the following action should be taken:
1. Switch off and remove the plug from the socket outlet.
2. Examine the mains supply cable for damage (only after removing the plug from the socket outlet).
3. If there is any sign of damage to the supply cable it MUST be renewed.The repair MUST be carried out by
Electrolux Service Agent or a similar qualified person.
4. NEVER use the machine with a damaged mains supply cable.
Proprietary carpet conditioning and air freshening materials
After using proprietary carpet conditioning powders, it is recommended that the filter be changed. Some of these
preparations contain substances which if left in the vacuum cleaner for extended periods could damage the
plastic mouldings which form the structure of the cleaner.
Many air fresheners, household deodorants, sprays and polishes contain a highly flammable gas propellant.
Because of this, it is particularly important that these products are used strictly in accordance with the relevant
manufacturer’s instructions.
It is essential that none of the above products are spray ed directly into the v acuum cleaner, it’s filter or dust cup.
3
SERVICE
Should you require service on your Electrolux cleaner, please telephone 08706 055055.
Before requesting service, please check whether your problem is co vered under Service
Checklist (see below).
SERVICE CHECKLIST
• If your cleaner will not operate, check the plug connection, plug fuse and mains
fuse.
• Never allow the filter to become so clogged that it impedes the air-flow , thus reducing
the cleaning efficiency of the machine. The character of household dust and its
effect on the air-flow through the machine may vary considerably. Fluffy dust allows
air to pass through readily whereas fine powdery dust or proprietary cleaning powders,
pack tightly in the filter, off ering greater resistance to air-flow and will reduce cleaning
efficiency if the filter becomes overloaded. Always ensure that you have a spare
genuine Electrolux filter.
• Always store your cleaner and spare filters in a dry place.
• Remove and clean filter once a month, or more often as necessary . This is essential
to ensure continued high filtration of dust particles.
• Never pick up hot cinders or lighted cigarette ends.
• Make certain that your cleaner does not come into contact with water or any
other liquid. It is not designed as a wet pick up cleaner, and must never be
used on damp carpets or wet floors.
Important - in the event of the mains supply cable of this vacuum cleaner requiring
replacement, we recommend that this be carried out by a Electrolux Service Agent.
Spares
New filters can be obtained from Authorised Electrolux Dealers and electrical retailers.
If difficulty is experienced in obtaining spares please call us on 08706 055055.
DO NOT OIL the motor at any time. The bearings are permanently
lubricated and sealed.
Rating Plate
The model, type, and serial numbers are
indicated on the rating plate located on the
back side of the cleaner. For prompt and
complete service information, always refer
to these numbers when inquiring about
service.
Model & Type No.__________________
Serial No. ________________________
4
MODEL TYPE SERIAL NO.
VOLTS WATTS HERTZ
ELECTROLUX
Identify Parts
7
4
1
6
5
8
2
9
10
3
1. Body 8. Stair Cleaning Hand Gr ip
2. Floor Nozzle 9. Handle Button
3. Handle 10. Electr ical Cord
4. On/Off Switch
5. Dust Cup Latch
6. Dust Cup
7. Filter Assembly
5
HOW T O ASSEMBLE
Loop
Attach Handle
1. Locate the handle and body.
2. Line the handle up with the hole in the
top of the body. Flat side of handle and
loop forward.
3. Push handle down into body while
pressing button on back of the body.
Handle will click into place.
4. There are two handle positions available .
Handle all the way up and handle all the
way down.
5. Button needs to be depressed to raise
and lower the handle.
Body
Handle
Button
HOW T O USE
Power Switch
The power switch has three positions. Off, Floor (hard surface cleaning) and Carpet.
Power
Switch
Dual Uses
Push the handle button to release lock.
The handle will slide freely until it finds
one of the two available handle
positions. It automatically loc ks in either
of these two positions.
With the handle collapsed, the unit is
great for stairs and compact storage.
With the handle extended, the unit is
great for floor cleaning.
6
Nozzle with Edge Kleener
Airflow under the nozzle automatically directs
suction to the edges and corners for maximum
full width cleaning.
Experiment with your hard floor surfaces,
sometimes it is best to have brush roll
turning. (Switch in the
Stair
Cleaning
Handle
carpet
®
position).
HOW T O MAINT AIN
The instructions given in this booklet serve as a guide to routine maintenance. K eep the
cleaner operating at top efficiency. Empty the dust cup after each use.
NOTE: Turn off the power switch and unplug the electrical cord to service.
Empty Dust Cup
Hook
Latch
3. Leaving dust cup filter in
1. Pull dust cup latch
up.
2. Swing dust cup out
from body and up
off the dust cup
hook on the body.
the dust cup, shake
contents of dust cup into
a waste container. If
picking up lots of carpet
fuzz or pet hair, remove
filter. (To clean dust cup
filter refer to dust cup
filter section.)
Clean Dust Cup Filter
Clean the dust cup filter as necessary.
1. Remove dust cup.
2. Slide dust cup filter out of dust cup.
3. Shake and brush the dust and dirt from
filter. On the back of the dust cup is a
scraper that will help to remove debris
from the filter.
4. Replace filter with filter top facing up to
ensure proper filter installation.
Scraper
4. To replace dust cup, fit
dust cup down onto
hook.
5. Swing down and push
gently into body until
dust cup clicks into
place.
Filter T op
FRONT
Replace a torn filter. To order additional dust
cup filters call Electrolux on 08706 055055.
7
HOW T O MAINT AIN (continued)
Brush Roll
NOTE: T urn off switch and unplug the electrical cord
Long hair, thread, string, etc. can wrap around the
revolving brush roll and result in reduced performance.
To check brush roll for debris turn cleaner nozzle over
and inspect for wrapped matter . Use scissors to cut debris
from brush roll.
before inspecting brush roll.
Brush Roll
How to Check for Blockages
NOTE: T urn off switch and unplug the electrical cor d before checking f or blockages.
If suction performance diminishes, check for blockages in suction path.
Hole
1. Remove dust cup and set aside.
3. Reinstall dust cup.
8
2. Inspect for blockages inside hole area
at base of body opening. Use tool or
coat hanger to remove blockage.
Access
Door Latch
Brush
Roll Area
4. Flip vacuum over and inspect dirt
channel in brush roll area. Open
access door by pulling back on access
door latch and lifting up, check for
blockage. Remo ve an y blockages with
tool or coat hanger.
Guarantee
This guarantee is in addition to your statutory and other legal rights.
This product is for household use only.
Electrolux products are carefully designed, manufactured, tested and inspected
and, in consequence, we undertake to replace or repair any part found to be
defective in material or workmanship, within one year of delivery to the or iginal
purchaser, free of charge. You may be required to take the product to your nearest
service provider if the product requires attention during the first year.
There are certain conditions which may invalidate this guarantee:
a. It is dependent upon the appliance being correctly installed and used in
accordance with the Company’ s instructions under normal domestic conditions
within the United Kingdom or the Republic of Ireland.
b. Service at all times must be carried out by an Electrolux Service Representative
or authorised agent.
c. The guarantee may be invalidated by unauthorised repair or modification of
the appliance.
d. You may be charged by Electrolux if you call for an engineer to resolv e a problem
that we believe is covered in the instruction booklet.
The Company does not accept liability for defects arising from neglect, misuse or
accident.
Proof of the date of purchase will be required before service under guarantee is
provided. For further assistance call our customer care line on 08706 055055.
Important:
For future reference we suggest you record the following details here, and keep
the receipt with the handbook as proof of purchase.
Purchased from___________________________________________________
Date purchased ________________ Model no _________________________
101 Oakley Road, LUTON, BEDFORDSHIRE, LU4 9QQ
Features of the Electrolux vacuum cleaner and accessories supplied with it are protected
in Great Britain and abroad by Patents or Registered Designs.
This appliance conforms with the requirements of the amended E.E.C. directive No. 89/
336/EEC relating to electromagnetic compatibility (EMC) CE.
Electrolux, may introduce modifications to their product from time to time, and
consequently the details given in this booklet are subject to alteration without notice.
Part No. 70965A
(4/03) Printed in China
©2000 Electrolux
Loading...