Thank you for choosing a first class product from Electrolux, which hopefully will
provide you with lots of pleasure in the future. The Electrolux ambition is to offer
a wide variety of quality products that make your life more comfortable. You find
some examples on the cover in this manual. Please take a few minutes to study
this manual so that you can take advantage of the benefits of your new machine.
We promise that it will provide a superior User Experience delivering
Ease-of-Mind. Good luck!
67
The following symbols are used in this manual:
T
Important information concerning your personal safety and
information on how to avoid damaging the appliance
General information and tips
Environmental information
Scrapping old appliances
he symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it shall be handed over
to the applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or
the shop where you purchased the product.
68
Contents
Scrapping old cabinets69..........
Contents70.....................
Safety instructions71...........
USE72.........................
BEFORE USE72..................
Control Panel72..................
To start the freezer and set the
correct temperature73.........
Adjustning the thermometer display 73
Switching off74...................
Temperature inside the freezer74....
Alarms and other features74........
Freezing75.......................
Suitable storage periods76.........
Thawing76.......................
Cabinet interior76.................
HINT and TIPS76.................
Saving energy76..................
Food Storage77..................
Protect the environment77.........
MAINTENANCE and CLEANING77..
Removing the ventilation grille78....
Cleaning78......................
To change the lamp78.............
Defrosting the freezer78............
When the appliance is not in use78..
SOMETHING NOT WORKING79....
Technical specification81..........
INSTALLATION81.................
Mains Cable81...................
Unpacking81.....................
Remove the transport supports82...
Cleaning82......................
Installing the cabinet82............
Door Reversal83..................
Electrical connection84............
European Guarantee85............
www.electrolux86.................
Kundendiesnst87.................
69
Safety instructions
Carefully read these instructions to
learn how the appliance works
how to care for it. Keep the
booklet. It will come in handy if
later sell the cabinet or give it
somebody else.
These warnings are provided in the
interests of your safety. Ensure that
you understand them all before
installing or using the appliance. Your
safety is of paramount importance. If
you are unsure about any of the
meanings or warnings contact the
Customer Care Department.
For the User
·The cabinet is intended for keeping
foodstuff in a normal household as
explained in this instruction booklet.
·Do not keep explosive gases or
liquids in the refrigerator or freezer
compartment. They may explode and
cause injury and material damage.
·Do not place food products directly
against the air hole on the rear wall.
·Do not keep carbonised drinks or
bottles in the freezer compartment.
The glass bottles may break.
·The cabinet is heavy. The edges
and projecting parts of the cabinet
may be sharp. Be careful when moving
the cabinet and always use gloves.
and
instruction
you
to
Child Safety
·Pay attention so that small children
do not gain access to the operating
controls or the inside of the cabinet.
70
USE
BEFORE USE
Position and clean the cabinet as
explained in the section "Installation".
Control Panel
18
--
ACTIONFREEZE
Before inserting the power plug into the
outlet and switching on the cabinet for
the first time, leave it standing upright
for about 4 hours. Otherwise the
compressor may sustain damage. This
time will allow the oil sufficient time to
return to the compressor.
BC
A
CD
A. Freezer power switch
Switches the freezer on and off.
Green indicator lamp
Lights when the freezer is operating.
B. Temperature display
Shows the highest temperature inside
the freezer.
C. Temperature adjustment
button/thermostat
Used to set the temperature in the
freezer.
To start the freezer and set the correct
temperature
Switching on:
Switch on the freezer by pressing the
power switch.
The alarm sounds if the temperatur
inside the freezer reaches r
oom
temperature. Turn off the alarm
pressing the switch-off
18
--
button.
ACTIONFREEZE
e
by
E
D. FAST FREEZE button
Used to switch the Fast Freeze feature
on and off.
Yellow indicator lamp
Lights when Fast Freeze is operating.
E. Alarm shut-off button
Used to turn the audible alarm off.
Red warning lamp
Flashes when one of the alarms in the
cabinet has been triggered.
20
--
ACTIONFREEZE
Setting the temperature
Press the buttons until the desired
temperature blinks on the temperature
display. (The temperature can be set
between -15°C and -24°C.)
"+" increases the temperature.
"-" decreases the temperature.
71
18
--
18
--
ACTIONFREEZE
ACTIONFREEZE
Once set, the temperature display
shows the current temperature inside
the freezer.
Allow the cabinet to run for a period of
24 hours whenever the temperature
setting is changed. This will allow the
temperature to stabilise inside the
cabinet.
It is not necessary to reset the
temperature when the cabinet is
switched on after it has been out of
use. The thermostat recalls the
previously set temperature.
Adjustning the thermometer
display
On delivery, the cabinet's thermometer
is set to show the average temperature
during normal operation conditions. If
the cabinet is used during other
operational conditions, for example, in
warmer surroundings, with a lot of
food or if the cabinet is run entirely or
partially without accessories the
thermometer display can be adjusted
for these conditions.
When adjusting the thermometer
display, the cabinet should be working
and freezing should not be active.
Press the shut down button for the
Setting the temperature "+" and the "-"
button simultaneously and hold them
down for about 5 seconds. As
confirmation, the sound will buzz with
a short signal. The thermometer is now
set for display of warmer food
products. To return to normal display,
repeat the same process. As
confirmation, the buzzer will give off a
loud signal.
Information: It is very important to
press the buttons at exactly the same
time.
Please observe that the display will not
change immediately. Instead, the
temperature of the cabinet will
successively change internally.
Switching off
Switch off the cabinet by pressing the
power switch.
Keep the button pressed for approx. 1
second.
18
--
ACTIONFREEZE
Power to the cabinet is completely
interrupted only when the power plug
is disconnected.
Temperature inside the freezer
To ensure that foodstuff will keep for a
long time, be sure that the temperature
inside the freezer is -18°C or below.
Please note, however, that the energy
consumption increases as the
temperature decreases.
The built-in temperature display shows
the warmest temperature inside the
freezer. If the temperature is measured
using a thermometer, put it between
the products since this will reflect the
real temperature in the frozen
products. It is normal that the built-in
temperature display shows a
temperature slightly above that
measured in other ways.
72
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.