Thank you for choosing a first class product from Electrolux, which hopefully will
provide you with lots of pleasure in the future. The Electrolux ambition is to offer
a wide variety of quality products that make your life more comfortable. You find
some examples on the cover in this manual. Please take a few minutes to study
this manual so that you can take advantage of the benefits of your new machine.
We promise that it will provide a superior User Experience delivering
Ease-of-Mind. Good luck!
71
The following symbols are used in this manual:
T
Important information concerni n g your personal safety an d
information on how to avoid damaging the appliance
General information and tips
Environmental information
Scrapping old appliances
he symbol on the product or on its packaging indicates that this product
may n ot be treated as h ousehold waste. Instead it shall be handed over
to the applicable collection point for the recycling of electrical an d electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or
the shop where you purchased the product.
72
Contents
Scrapping old cabinets72..........
Contents73.....................
Safety instructions74...........
USE75..........................
BEFORE USE75..................
Control Panel75..................
To start the freezer and set the
correct temperature75.........
Adjustning the thermometer display 76
Switching off76...................
Temperature inside the freezer76....
Alarms and other features77........
Freezing78.......................
Suitable storage periods78.........
Thawing78.......................
Cabinet interior78.................
HINT and TIPS79.................
Saving energy79..................
Food Storage80..................
Protect the environment80.........
MAINTENANCE and CLEANING80..
Removing the ventilation grille80....
Cleaning80......................
Defrosting the freezer81............
To change the lamp82.............
When the appliance is not in use82..
SOMETHING NOT WORKING82....
Technical specification84..........
INSTALLATION85.................
Mains Cable85...................
Unpacking85.....................
Electrical connection85............
Remove the transport supports85...
Cleaning85......................
Installing the cabinet85............
Door Reversal86..................
Kundendiesnst87.................
European Guarantee88............
www.electrolux89.................
73
Safety instructions
Carefully read these instructions to
learn how the appliance works
how to care for it. Keep the
booklet. It will come in handy if
later sell the cabinet or give it
somebody else.
These warnings are provided in the
interests of your safety. Ensure that
you understand them all before
installing or using the appliance. Your
safety is of paramount importance. If
you are unsure about any of the
meanings or warn in gs contact the
Customer Care Department.
For the User
·The cabinet is intended for keeping
foodstuff in a normal household as
explained in this instruction booklet.
·Do not keep explosive gases or
liquids in the refrigerator or freezer
compartment. They may explode an d
cause injury and material damage.
·Do not let sharp objects come into
contact with the refrigerating system
on the back of and inside the cabinet.
If the refrigerating system is punctured,
the cabinet will be damaged and
foodstuff in side may spoil.
·Do not keep carbonised drinks or
bottles in the freezer compartment.
The glass bottles may break.
·The cabinet is heavy. The edges
and projecting parts of the cabinet
may be sharp. Be careful when moving
the cabinet an d always use gloves.
and
instruction
you
to
Child Safety
·Pay attention so that small children
do not gain access to the operating
controls or the inside of the cabinet.
74
USE
BEFORE USE
Position and clean the cabinet as
explained in the section "Installation".
Control Panel
18
--
ACTIONFREEZE
Before in sertin g th e power plu g in to the
outlet and switching on the cabinet for
the first time, leave it standing upright
for about 4 hours. Otherwise the
compressor may su stain damage. Th i s
time will allow the oil sufficient time to
return to the compressor .
BC
A
CD
E
A. Freezer power switch Switches the freezer on and off.
Green indicator lamp Lights when the freezer is operating.
B. Temperature display Shows the highest temperature inside the freezer.
C. Temperature adjustment buttons/thermostat Used to set the temperature.
D. FAST FREEZE button Used to switch the Fast Freeze feature on and off.
Yellow indicator lamp Lights when Fast Freeze is operating.
E. Alarm shut-off button Used to turn the audible alarm off.
Red warning lamp Flashes when one of the alarms in the cabinet has been
triggered.
To start the freezer and set the correct
temperature
20
--
ACTIONFREEZE
Switching on:
Switch on the freezer by pressing the
power switch.
The alarm sounds if the temperatur
inside the freezer reaches r
temperature. Turn off the alarm
pressing the switch-off
18
--
ACTIONFREEZE
oom
by
button.
Setting the temperature
Press the buttons until the desired
temperature blinks on the temperature
e
display. (The temperature can be set
between -15°C and -24°C.)
"+" increases the temperature.
"-" decreases the temperature.
18
--
ACTIONFREEZE
75
Once set, the temperature display
shows the current temperature inside
the freezer.
Allow the cabinet to run for a period of
24 hours whenever the temperature
setting is changed. This will allow the
temperature to stabilise inside the
cabinet.
It is not necessary to reset the
temperature when the cabinet is
switched on after it has been out of
use. The thermostat recalls the
previously set temperature.
Adjustning the thermometer
display
On delivery, the cabinet's thermometer
is set to show the average temperature
during normal operation conditions. If
the cabinet is u sed during other
operational conditions, for example, in
warmer surroundings, with a lot of
food or if the cabinet is run entirely or
partially without accessories the
thermometer display can be adjusted
for these conditions.
When adjusting the thermometer
display, the cabinet should be working
and freezing should not be active.
Press the shut down button for the
Setting the temperature "+" and the "-"
button simultaneously and hold them
down for about 5 seconds. As
confirmation, the sound will buzz with
a short signal. The thermometer is now
set for display of warmer food
products. To return to normal display,
repeat the same process. As
confirmation, the buzzer will give off a
loud signal.
18
--
ACTIONFREEZE
Information: It is very important to
press the buttons at exactly the same
time.
Please observe that the display will n ot
change immediately. Instead, the
temperature of the cabinet will
successively change internally.
Switching off
Switch off the cabinet by pressing the
power switch.
Keep the button pressed for approx. 1
second.
18
--
ACTIONFREEZE
Power to the cabinet is completely
interrupted only when the power plug
is disconnected.
Temperature inside the freezer
To ensure that foodstuff will keep for a
long time, be sure that the temperature
inside the freezer is -18°C or below.
Please note, however, that the en ergy
consumption increases as the
temperature decreases.
The built-in temperature display shows
the warmest temperature inside the
freezer. If the temperature is measured
using a thermometer, put it between
the products since this will reflect the
real temperature in the frozen
products. It is normal that the built-in
temperature display shows a
temperature slightly above that
measured in other ways.
76
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.