AEG-Electrolux SG226 User Manual

Congélateur / Gefrier / Gongelatore/ Freezer

NOTICE D’UTILISATION

GEBRAUCHSANWEISUNG

ISTRUZIONI D’USO

INSTRUCTION BOOK

818 37 18--00/9

SG226

Safety instructions

Carefully read these instructions to learn how the appliance works and how to care for it. Keep the instruction booklet. It will come in handy if you later sell the cabinet or give it to somebody else. These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using the appliance. Your safety is of paramount importance. If you are unsure about any of the meanings or warnings contact the Customer Care Department.

For the User

· The cabinet is intended for keeping foodstuff in a normal household as explai ned in this instruction booklet.

· Do not keep explosive gases or liquids in the refrigerator or freezer compartment. They may explode and cause injury and material damage.

· Do not let sharp objects come into contact with the refrigerating system on the back of and inside the cabinet. If the refrigerating system is punctured, the cabinet will be damaged and foodstuff inside may spoil.

· Do not keep carbonised drinks or bottles in the freezer compartment. The glass bottles may

break.

· The cabinet is heavy. The edges and projecting parts of the cabinet may be sharp. Be careful when moving the cabinet and always use gloves.

Child Safety

· Pay attention so that small children do not gain access to the operating controls or the inside of the cabinet.

Scrapping old cabinets

When discarding the cabinet, hand it over to a recycling station. For more information, call your local city office or your dealer.

Contents

Safety instructions 38.................

Scrapping old cabinets 38.......................

Contents 38..........................

Description of the App lian ce 39........

Control Panel 39..............................

Before use 39.........................

Using the freezer 40...................

To start the freezer and set the correct temperature 40

Adjustning the thermometer display 40............

Temperature inside the freezer 40................

Switching off 40..............................

Alarms and other features 41....................

Freezing 41..................................

Suitable storage periods 42......................

Cabinet interior 42............................

Thawing 42..................................

Hints and Tips 43.....................

Saving energy 43.............................

Food Storage 43..............................

Protect the environment 43......................

Maintenance and Cleaning 44..........

Removing the ventilation grille 44................

Cleaning 44..................................

Defrosting the freezer 44.......................

To change t he li ght bulb 45.....................

When the appliance is not in use 45...............

Something Not Working 45............

Technical specification 46.............

Installation 47........................

Mains Cable 47...............................

Unpacking 47................................

Remove the transport supports 47................

Before installing the cabinet 47..................

Cleaning 47..................................

Installing the cabinet 48........................

Door Reversal 49.............................

Electrical connection 49........................

Electrolux 818 37 18-00/9

Description of the Appliance

Control Panel

A. Freezer power switch

Switches the freezer on and off.

Modell SG226

1. Freezing tray + accumulator

2. Freezer basket

3. Ventilation grill

-- 1 8

ACTIONFREEZE

ABCDEFG

E. Yellow indicator lamp

Lights when Fast Freeze is operating.

B. Temperature display

Shows the highest temperature inside the freezer.

C. Temperature adjustment button/thermostat

Used to set the temperature in the freezer.

D. FAST FREEZE button

Used to switch the Fast Freeze feature on and off.

Before use

Position and clean the cabinet as explained in the section "Installation".

Before inserting the power plug into the outlet and switching on the cabinet for the first time, leave it standing upright for about 4 hours. Otherwise the compressor may sustain damage. This time will allow the oil sufficient time to return to the compressor.

F. Alarm shut-off button

Used to turn the audible alarm off.

G. Red warning lamp

Flashes when one of the alarms i n t he cabinet has been triggered.

Electrolux 818 37 18-00/9

Using the freezer

To start the freezer and set the correct temperature

Switching on:

Switch on the freezer by pressing the power switch. The alarm sounds if the temperature inside freezer reaches room temperature. Turn off the by pressing the switch-off

Setting the temperature

Press the buttons until the desired temperature blinks on the temperature display. (The temperature can be set between -15°C and -24°C.) "+" increases the temperature. "-" decreases the temperature.

Once set, the temperature display shows the current temperature inside the freezer. Allow the cabinet to run for a period of 24 hours whenever the temperature setting is changed. This will allow the temperature to stabilise inside the cabinet. It is not necessary to reset the temperature when the cabinet is switched on after it has been out of use. The thermostat recalls the previously set temperature.

button.

the

alarm

--18

ACTIONFREEZE

Adjustning the thermometer display

On delivery, the cabinet's thermometer is set to show the average temperature during normal operation conditions. If the cabinet is used during other operational conditions, for example, in warmer surroundings, with a lot of food or if the cabinet is run entirely or partially without accessories the thermometer display can be adjusted for these conditions. When adjusting the thermometer display, the cabinet should be working and freezing should not be active. Press the shut down button for the Setting t he temperature "+" and the "-" button simultaneously and hold them down for about 5 seconds. As confirmation, the sound will buzz with a short signal. The t hermometer is now set for display of warmer food products. To return to normal display, repeat the same process. As confirmation, the buzzer will give off a loud signal.

Information: It is very important to press the buttons at exactly the same time. Please observe that the display will not change immediately. Instead, the temperature of the cabinet will

successively change internally.

Temperature inside the freezer

To ensure that foodstuff will keep for a long time, be sure that the temperature inside the freezer is -18°C or below. Please note, however, that the energy consumption increases as the temperature decreases. The built-in temperature display shows the warmest temperature inside the freezer. If the temperature is measured using a thermometer, put it between the products since this will reflect the real temperature in the frozen products. It is normal that the built-in temperature display shows a temperature slightly above that measured in other ways.

Switching off

ACTIONFREEZE

Switch off the cabinet by pressing the power switch. Keep the button pressed for approx. 1 second.

Power to the cabinet is completely interrupted only when the power plug is disconnected.

--18

Electrolux 818 37 18-00/9

Alarms and other features

Door open alarm

If the door remains open for more than about 1,5 minute, the red indicator lamp starts flashing and an audible alarm sounds. To switch off the alarm: Press the alarm shut-off button. As long as the door remains open, the audible alarm will sound anew at 1-minute intervals. The red i ndicator lamp goes out when the door is closed.

Temperature alarm

If the temperature rises above -12°C, the red warning lamp flashes and an audible alarm sounds. The temperature display will then start to flash. To switch off the alarm: Press the alarm shut-off button to switch off the audible alarm. The temperature display will stop flashing. The red warning lamp goes out when the temperature inside the freezer again falls below

-11°C. Find out what caused the alarm. See the chapter "Something not working".

Temperature memory

The temperature memory shows when an alarm has been triggered in the cabinet. The temperature memory operates as follows: When the temperature inside the freezer again falls below -11°C the audible alarm stops. The temperature display and the red warning lamp will flash to indicate than an alarm was triggered. When the alarm shut-off button is pressed, the display then displays the warmest temperature inside the cabinet during the alarm phase and the display stops flashing. By referring to the temperature display indication, it is possible to decide whether or not to discard the products inside the freezer.

Atabout-12°C: Most food products can be immediately re-frozen. Ice cream is especially sensitive to temperature changes and should be consumed as soon as possible. At -9° - -2°C: Food products should be prepared (cooked) prior to eating or re-freezing them.

ACTIONFREEZE

--18

--11

--18

ACTIONFREEZE

However, always check the quality of the food yourself to determine if it can be frozen or if it must be discarded.

Freezing

Press the fast freeze button approx. 24 hours prior to placing the food in the freezer . You need not press the fast-freeze button when freezing smaller quantities of food during any 24-hour period. Fast freeze is automatically switched off apporox 50 hours after the button has been pressed. Fast freeze can be discontinued by pressing the fast freeze button once again. The yellow fast freeze lamp remains lit as long as the fast freeze button is engaged. "A" (ACTION FREEZE) is displayed in temperature display

the

ACTIONFREEZE

Electrolux 818 37 18-00/9

+ 9 hidden pages