AEG-Electrolux SAN2444-4L User Manual
Specifications and Main Features
- Model: OKO-SANTO 2444-41
- Type: Combined refrigerator and freezer unit
- Refrigerator compartment air temperature limit: +3 °C to +8 °C
- Cool-fresh compartment air temperature: Close to 0 °C
- Refrigerant used: R600a
- Size: (none were provided)
- Input Voltage: 220-240 V / 50 Hz
- Recommended fuse: More than 10 A
- Climatic categories:
- SN: +10°C to 32°C
- NN: +16°C to 32°C
- ST: +18°C to 38°C
- T: +18°C to 43°C
- Additional Items:
- Vario shelf
- Small item drawer
- Bottle holder
- Humidity filter for high humidity drawer
- Set temperatures for refrigeration
- Refrigerator: +4 °C to +6 °C
- Refrigeration method employed: Cool with no manual override to the refrigerator
- Regulation Requirement: Regulations set for electrical safety within the confines of the machine,. directive to avoid steam cleaning and covering air ventilation openings
Frequently Asked Questions
Q: The interior light is off, how can I rectify that?
A: Remind those with the appliance that the interior light requires a replacement once burnt, and check to see what other components were damaged and how deeper the repairs will be. Remember to switch off electricity when changing the interiors light.
Q: How do I modify the temperature setting within a refrigerator section?
A: To adjust the temperature t range from +3 °C and +8 °C, use the temperature selection button, and the device will show your selection for 5 seconds.
Q: Is it advisable to place directly the food that has just been cooked, in the refrigerator?
A: No, hot food should be allowed to cool before being stored in an appliance.
Q: What foods can be stored in the cool-fresh compartment?
A: Cool-fresh compartments are not suitable for storing tropical fruits, avocados, and some vegetables as they are cold-sensitive.
Q: How do I fix the problem when it appears that the appliance is not cooling?
A: Inspect all ventilation openings for possible blockage, confirm that the appliance is switched ON and that the mains plug has been properly inserted into the socket.
User Manual
Loading...