AEG-Electrolux RM6401LDH User Manual

Typ C40 / 110

T.B. 10/2003

English

EN

MANUAL

ABSORPTION REFRIGERATOR

for RECREATIONAL VEHICLES

RM 6290 LD(H)
RM 6291 LD(H)
RM 6400 LD(H)
RM 6401 LD(H)

OPERATING INSTRUCTIONS
INSTALLATION INSTRUCTIONS

2

These operating instructions should be kept in a safe place.
If this device is passed on, please include these operating instructions with it.

© Dometic GmbH - 2002 - Subject to change without notice - Printed in Germany

INTERNET www.dometic.com

Kundeservice
Kundendienst

ЕохрзсЭфзуз Релбфюн

Customer Service
Servicio de Atención al Cliente
Service après-vente
Servizio Clienti
Klantenservice
Kundeservice
Serviço de Atendimento a Clientes
Asiakaspalvelu
Kundservice

3

1.0 INTRODUCTION 4

2.0 FOR YOUR SAFETY 4

2.1 Warning and safety notices 4

2.2 Coolant 4

3.0 WARRANTY AND CUSTOMER 5
SERVICE

3.1 Damage in transit 5

4.0 DESCRIPTION OF MODEL 5

5.0 REFRIGERATOR GUIDE 5

5.1 Cleaning 5

5.2 Switching on the refrigerator 6

5.3 Switching off the refrigerator 8

5.4 Defrosting 9

5.5 Storing food 9

5.6 Making ice cubes 9

5.7 Door locking 9

5.8 Winter operation 10

5.9I nterior light 10

5.10 Changing the decor panel 11

5.11 Positioning the storage racks 11

5.12 Troubleshooting 12

5.13 Maintenance 12

5.14 Environmental hints 13

5.15 Disposal 13

5.16 Energy-saving tips 13

5.17 Technical data 13

5.18 Declaration of conformity 14

6.0 INSTALLATION GUIDE 15

6.1 Installation 15

6.2 Draught-free installation 16

6.3 Ventilation and air extraction 17

6.4 Installation of the ventilation 18

system

6.5 Installation recess 19

6.6 Securing the refrigerator 19

6.7 Fume extraction 20

6.8 Gas installation 21

6.9 Electrical installation 23

TTAABBLLEE OOFF CCOONNTTEENNTTSS

4

INTRODUCTION

You have made an excellent choice in selecting the Dometic Absorption Refrigerator.
We are sure that you will be fully satisfied with your new appliance in all respects.

The appliance, which works silently, meets high quality standards and guarantees
the efficient utilisation of resources and energy throughout its entire life cycle, during
manufacture, in use and when being disposed of.

Before you start to use the appliance, please read the installation and operating
instructions carefully.
The refrigerator is designed for installation in leisure vehicles such as caravans or
motorcaravans. The appliance has been certified for this application in accordance with
EU Gas Directive 90/396/EEC.

FOR YOUR SAFETY

Warning and safety notices

 Never use a naked flame to check the appliance for leaks.

 Protect children!

When disposing of the refrigerator, remove all refrigerator doors and leave the
storage rack in the refrigerator. This will prevent accidental locking in or suffocation.

 If you smell gas:

- close the locking tap of the gas supply and the valve on the cylinder.

- open the windows and leave the room.

- do not switch on anything electrical.

- extinguish naked flames.

 Never open the cooling unit; it is under high pressure.
 Work on the gas, flue system and electrical components must only be

carried out by qualified service personnel

.

 It is imperative that the operating pressure should correspond to the data given on

the model plate of the appliance.

 Compare the operating pressure data given on the model plate with the data on the

pressure monitor of the liquid gas cylinder.

 Liquid gas cylinders may only be changed by qualified personnel.
 Gas operation of the appliance is not permitted while travelling on ferries.

 Covers ensure electrical safety and must only be removed using a tool.
 The appliance must not be exposed to rain.
 The refrigerator is not suitable for the proper storage of medications.

Coolant

Ammonia is used as a coolant.
This is a natural compound also used in household cleaning agents (1 litre of
Salmiak cleaner contains up to 200g of ammonia - about twice as much as is used in
the refrigerator). Sodium chromate is used for corrosion protection (less than 2% of the
coolant).
In the event of leakage (easily identifiable from the unpleasant odour):

 switch off the appliance.
 air the room thoroughly.
 inform the authorised Customer Service department.

11..00

22..00

2.1

2.2

Danger Attention

5

WARRANTY AND CUSTOMER SERVICE

Warranty arrangements are in accordance with EC Directive 44/1999/CE and the
normal conditions applicable for the country concerned. For warranty or other
servicing, please contact our Dometic Service department. Any damage due to
improper use is not covered by the warranty. The warranty does not cover any modifi
cations to the appliance or the use of non-original Dometic parts;
the warranty does not apply if the installation and operating instructions are not
adhered to and no liability shall be entertained. Parts can be ordered throughout
Europe from our Dometic Service department. Your Service Centre contact numbers
numbers are found in the European Service Network booklet

When contacting Dometic Service, please state the model and product number, serial
number together with the MLC Code, if applicable. You will find this information on the
data plate inside the refrigerator.

Damage in transit

After removing the packaging, check whether the refrigerator has been damaged
during transportation.

Any damage sustained in transit must be reported to the transportation company
concerned no later than seven days after delivery of the goods.

DESCRIPTION OF MODEL

REFRIGERATOR GUIDE

Cleaning

Before using the refrigerator, it is advisable to clean the appliance both inside and
out.

 Use a soft cloth and lukewarm water with a mild detergent.
 Then rinse the appliance with clean water and dry thoroughly.
 Remove dust from the refrigerator unit at yearly intervals using a brush or soft cloth.

To avoid deterioration of materials:

 Do not use soap or hard, abrasive or soda-based cleaning agents.
 Do not allow the door seal to come into contact with oil or grease.

33..00

44..00

55..00

5.1

3.1

RM 6400 LD(H)

e.g.

Refrigerator Mobile /
Mobiler Absorberkühlschrank

Last digit 0 = manual ignition
Last digit 1 = automatic ignition

H = raised panel

D = Dethleffs

L = with interior light

6

Using the refrigerator

 The refrigerator is silent in operation.
 When the appliance is first put into operation, there may be a mild odour which will

disappear after a few hours. Ensure the living area is well ventilated.

 The freezer compartment should be cold about one hour after switching on the

refrigerator.

 The refrigerator will take several hours to reach its operating temperature.

Controls

Note:

The refrigerator is equipped to operate off mains power, DC or liquid gas.
The desired power option is selected by means of energy selector switch (A).
Energy selector switch (A) has four settings: AC mains power, DC (12V),
gas (liquid gas), O (off).

5.2

5.2.1

A. Manual Ignition ( RM 6290 LD(H) / RM 6400 LD(H) )

B. Automatic Ignition ( RM 6291 LD(H) / RM 6401 LD(H) )

A = energy selector switch
B = gas/electric thermostat
C = manual ignition button (Piezo ignition)

Off

AC

DC

Gas

A = energy selector switch
B = gas/electric thermostat
D = automatic ignition indicator

A

B

C

A

B

D

7

Electrical operation

1. 12V DC

The refrigerator should only be used while the motor is running.

1. Set energy selector switch (A) to.

The refrigerator operates without thermostatic
control (continuous operation).

2. Mains power

This option should only be selected where the supply voltage of the connection
for power supply corresponds to the value specified on the data plate.
Any difference in values may result in damage the appliance.

Gas operation

 The refrigerator should only be operated using liquid gas

(propane, butane).

 Operation using gas is prohibited in petrol stations.

1. Open the valve of the gas cylinder

2. Open the shut-off valve to the gas supply.

Proceed to the description that applies to YOUR model.

1. Manual ignition

5.2.2

5.2.3

1. Set energy
selector switch (A)
to gas.

2. Press and hold
rotary switch.

4. Check the inspection glass to
see whether there is a flame
(the inspection glass is insi­de the refrigerator at the
bottom left).

1. Set energy
selector switch
(A) to.

2. Use rotary
switch (B) to
regulate the
temperature in
the main refrige­rator compart­ment.

3. Activate Piezo
ignition (C)
several times at
intervals 1-2
seconds.

A

B

A

A

B

C

8

5. Keep rotary switch (B) depressed for another 10-15 seconds, then release.

6. Check the inspection glass to see whether a flame is burning.

7. Repeat the entire process if the flame has gone out.

8. Use rotary switch (B) to regulate the temperature in the main refrigerator compartment.

2. Automatic ignition

4. Keep rotary switch "B" depressed for another 10-15 seconds, then release.

5. If the flame goes out, the ignition system will repeat the ignition process automatically.

6. Adjust the temperature in the main refrigerator compartment using rotary switch "B".

All refrigerators, whether manual or automatic ignition, are equipped with
automatic flame protection, which automatically cuts off the supply of gas
approximately 30 seconds after the flame goes out.

When using for the first time, and after changing the gas cylinder, the gas
pipes may contain air. By means of brief operation of the refrigerator and
any other gas appliances (e.g. cookers), air is removed from the gas pipes.
The gas will then ignite without delay.

Switching off

1. Set energy
selector switch (A)
to Gas.

2. Press and hold
rotary switch (B).

B

A

3. The ignition process is activated automatically,
accompanied by a ticking sound; the indicator
lamp (D) will flash. Upon successful ignition, the
sound and the flashing will stop.

5.3

1. Set energy selector switch (A) to
position "0" (OFF). The appliance is
now fully switched off.

A

D

Switching off gas operation

If the refrigerator is to be taken out of service for an
extended period of time, the on-board shut-off valve and
the cylinder valve must be closed.

2. Secure the door open by
means of the door stop.
The door will be slightly
ajar; this is to prevent
mould from forming inside
the appliance.

9

Defrosting

As time goes by, frost builds up on the fins.
When the layer of frost is about 3mm thick, the refrigerator should be defrosted.

1. Switch off the refrigerator, as described in Section 5.3 - "Switching off".

2. Remove the ice cube tray and food.

3. Leave the refrigerator door open.

4. After defrosting (freezer compartment and fins free of frost), wipe the cabinet dry
with a cloth.

5. Use a cloth to mop up the water from the freezer compartment.

6. Switch the refrigerator back on again.

The layer of ice must never be removed forcibly, nor may defrosting be
accelerated using a heat source.

Note:

Water thawing in the main compartment of the refrigerator runs into an appropriate
container at the back of the refrigerator. From there, the water evaporates.

Storing food

 Always store food in sealed containers, aluminium foil or similar.
 Never put hot food into the refrigerator; always let it cool first.
 Products that could emit volatile, flammable gases must not be stored in the

refrigerator.
The freezer compartment is suitable for making ice cubes and for short-term
storage of frozen food.
It is not suitable as a means of freezing foods.

Making ice cubes

Ice cubes are best frozen overnight. At night, the refrigerator has less work to do and
the unit has more reserves.

Only use drinking water!

Door locking

5.4

5.5

5.6

1. Fill the ice
cube tray with
drinking water.

2. Place the ice cube tray
in the freezer
compartment.

5.7

Park-position:

close

open

10

Winter operation

1. Check that the ventilation grills and the extractor have not been blocked by
snow, leaves or similar.

Interior light (when fitted)

Changing the light bulbs

5.8

5.9

1. Remove cover.

2. Detach defective light
bulb.

3. Fit new light bulb.

4. Clip the cover back in
place.

90°

1.

2.

Note:

for 12V DC :
1 light bulb 8V, 2W
for 24V DC :
2 light bulbs 28V, 1,5W

2. When the ambient temperature falls below +8°C, the optional winter covers
should be fitted. This protects the unit from excessively cold air.

Lower ventilation grille ( L200 )

Upper ventilation grille with flue vent ( L100)

3. Affix the cover and
fasten it.

It is also recommended that the winter covers
should be used when the vehicle is taken out of
service for an extended period of time.

TTIIPP

Please contact Dometic Service centres for

replacement light bulbs.

11

Changing the decor panel

Positioning the storage rack

To fit the storage rack, the reverse order applies.

5.10

5.11

Dismantling:

1. Loosen the front
and back securing
brackets.

2. Move the storage rack to the left and
remove it.

2.

1.

If changing of the decor panel is required, turn to your dealer, please.

12

Troubleshooting

Maintenance

 EN 1949 stipulates that the appliance´s gas equipment and its associated fume

system must be inspected after installation and a certificate issued.

Afterwards a qualified technician must inspect according to EN 1949 every two
years and a certificate issued. It is the users responsibily to arrange for inspections

after purchase.

 It is recommended that the gas burner be inspected and cleaned as necessary at

least once a year.

5.12

5.13

Failure 1: The refrigerator does not work in gas operation mode.

Possible cause Action you can take

a.) Gas bottle empty.

b.) Is the supply cut-out device open?.

Before calling the authorised Service department, please check whether:

1.The instructions in the section "Using the refrigerator" have been followed.

2. The refrigerator is not tilted excessiveley.

3. It is possible to operate the refrigerator with an available power source.

Failure 2: The refrigerator does not work on 12V mode or 230V mode.

Possible cause Action you can take

a.) On-board fuse defective.

b.) No connection to supply voltage.

a.) Fit new fuse.

b.) Establish power connection.

Failure 3: The refrigerator does not cool sufficiently.

Possible cause Action you can take

a) Inadequate ventilation to the unit.

b) The thermostat setting is too low.

c) There is too much ice on the condenser.

d) Too much warm food put inside.

a) Check that the ventilation grilles are not

covered.
Check whether the refrigerator was instal-

led properly (Installation Guide).

b) Turn the thermostat to a higher setting.

c) Check that the refrigerator door seals

when shut.

d) Let food cool down first.

a.) Change gas bottle.

b.) Open the cut-out device.

13

Environmental hints

Refrigerators manufactured by Dometic GmbH are CFC-free.
Ammonia (a natural compound of hydrogen and nitrogen) is used in the cooling unit
as a coolant. The non-ozone-hazardous cyclopentan is used as a propellant in the
manufacture of the PU foam insulation.

Disposal

In order to ensure that the recyclable packaging materials are re-used, these should
be sent to the usual local collection system.
The appliance should be transferred to a suitable waste disposal company that will
ensure re-use of the recyclable components and proper disposal of the rest.
For eco-friendly draining of the coolant from all absorber refrigeration units, a suitable
disposal plant should be used

Energy-saving tips

 At an average ambient temperature of approx. 25°C, it is sufficient to operate the

refrigerator at the middle thermostat setting (for both gas and mains voltage).

 Where possible, always store goods that have previously been cooled.
 Do not position the refrigerator in direct sunlight.
 Constant circulation of air must be supplied to the refrigerator unit.
 Defrost regularly.
 Open the door only for a short time when removing goods from the refrigerator.
 Run the refrigerator for about 12 hours before filling it.

Technical data

5.14

5.15

5.16

5.17

RM 6290 LD 821x525x607 97 lit. 10,5 lit. 125W / 120W ca.2,5KWh / 270g 28 kg X X

RM 6291 LD 821x525x607 97 lit. 10,5 lit. 125W / 120W ca.2,5KWh / 270g 28 kg X X

RM 6400 LD 821x525x607 108 lit. 10,5 lit. 135W / 130W ca.2,6KWh / 270g 30 kg X

RM 6401 LD 821x525x607 108 lit. 10,5 lit. 135W / 130W ca.2,6KWh / 270g 30 kg X

RM 6290 LDH 826x525x607 97 lit. 10,5 lit. 125W / 120W ca.2,5KWh / 270g 28 kg X X

RM 6291 LDH 826x525x607 97 lit. 10,5 lit. 125W / 120W ca.2,5KWh / 270g 28 kg X X

RM 6400 LDH 826x525x607 108 lit. 10,5 lit. 135W / 130W ca.2,6KWh / 270g 30 kg X

RM 6401 LDH 826x525x607 108 lit. 10,5 lit. 135W / 130W ca.2,6KWh / 270g 30 kg X

We reserve the right to make technical changes.

*Average consumption measured at an average ambient temperature of 25°C in pursuance of

ISO Standard.

Model Dimensions Groos capacity Usable Connection * Consumption Netweight Ignition Ignition Stepped-

H x W x D (mm) incl. freezer capacity of Mains / Battery electricity / gas Piezo Reigniter cabinet
depth incl. door compartment freezer in 24 hrs

compartment

14

Declaration 5.18

15

INSTALLATION GUIDE

On installation of the appliance, the technical and administrative regulations of the
country in which the vehicle will first be used must be adhered to. Otherwise the
refrigerator must be installed as described in these instructions. In some OEM applica­tions it may not be possible for these instructions to be followed exactly. In this case an
authorised Dometic representative may issue supplementary instruction

In Europe, for example, gas appliances, cable laying, installation of gas
cylinders, as well as approval and checking for leaks must comply with EN 1949
for liquid gas units in vehicles.

Installation

The appliance and its fume extraction shall be installed in such a way as to be acces­sible for servicing at all times and must be capable of easy removal and installation.

The appliance may only be installed by authorised personnel.
Installation and connection of the appliance must comply with the latest
technical regulations, as follows:



European Standard EN 1949



European Standard EN 732



The electrical installation must comply with national regulations
( EN 1648-1 , EN 1648-2 , EN 60335-2-24 for Europe).



The gas installation must comply with national regulations.



Local and building control department requirements



The appliance shall be installed in such a way that it is shielded from
excessive heat radiation.

Excessive heat impairs performance and raises the energy consumption of the
refrigerator.

Side Installation

If the appliance is installed on the same side of the vehicle as the entrance
door, it is desirable that the door does not cover the refrigerators vents.
If this cannot be avoided there must be a gap of at least 25mm between the door and
the vents.

Rear installation

If the refrigerator is mounted at the rear of the vehicle you must ensure the lower grille
is not covered by the bumper or rear lights. This would be prevent the air from
circulating properly and cause problems in warm weather.

66..00

6.1

6.1.1

6.1.2

Fig.2

Air vent grille not
blocked: OK!

Any installation that is not carried out by qualified persons will
jeopardize the manufacturer's guarantee.

16

Draught-free installation

The refrigerator must be sealed in accordance with EN 1949.

Illustrated below are two typical approved methods of sealing.

Proposal 1:

Using the Installation Sealing Kit from Dometic

(SP

.No. 241 2559-00, available from Dometic)

Insert lipped seals (A) into the installation
recesses at the bottom and at each side.

Insert deflector plate (B), fitted with a lipped seal
(A) of heavy-duty, nonflammable material, into the
installation recess (see Fig. 1).

Insert deflector plate (B) in such a way that the
hot air escapes through the air vent grating into
the open air.

Affix the discharge plate to the caravan wall, not
to the refrigerator!

In addition, discharge plate (B) with its lipped seal
(A) must seal the refrigerator off from the living
area (see Fig. 1).

Ensure that the refrigerator is installed level in the
recess.

Proposal 2:

Another option is to provide the refrigerator with a cowl
(A). The cowl (A) should ideally be affixed to the caravan
wall, not to the refrigerator. Insert sealing strips at the bot­tom and sides of the cover.

Finally, push the refrigerator into the cover from the front.
Both of these installation options facilitate the removal and

installation of the appliance for servicing.

Comment:

Other methods of sealing may be approved. However the chosen method must prevent
draughts entering the living space of the caravan or motorhome. Failure to seal correct­ly will allow warm air to collect around the refrigerator and its performance will be
affected.
If the cavity between the caravan wall and the refrigerator is sealed so that fumes
cannot penetrate the living area it is possible to vent the flue gas directly through the
upper grille without using the aluminium flue pipe. For this installation method, it is
recommended that the same air vent grille should be used at the top and at the
bottom (L200), and that the T-piece of the flue pipe is turned 45 degrees.

6.2

Fig.1

17

If even with draught-free installation a fume chimney is desirable, you must incorporte
the L100 ventilation and extraction system into the upper air vent opening.

Installation of fume chimney: please refer to point 6.7.

Ventilation and extraction

A correct installation is important for correct operation of the appliance to ensure, there
is no a build-up of heat at the back of the appliance; this heat must be allowed to escape
into the open air.

In the event of high ambient temperatures, full performance of the cooling unit
can only be achieved by means of adequate ventilation and extraction.

Ventilation is provided for the unit by means of two apertures in the caravan wall.
Fresh air enters at the bottom, extracts the heat and exits through the upper vent
grille.

The upper ventilation grille should be positioned as high as possible above
condenser (A).

The lower ventilation grille should be flush with the floor of the vehicle, allowing
any gas leakages (heavier than air) to escape directly into the open air.

If such an arrangement is not possible a hole must be provided under the refrigerator
(not close to the burner) so that any leaking LP gas can escape. This must have an
effictive area of at least 13cm². It is desirable to fit the hole with wire mesh or similar,
and an angle plate to protect it from stones, mud etc., the wire mesh must not reduce
the effective area of 13cm² ( EN 1949).

The ventilation grilles must have an open cross-section of at least 250 cm².
This is reached using the Dometic Absorber Ventilation and Air Extraction
System L100 / L 200 that has been tested and approved for this purpose.

Comment:

If the distance between the wall and the refrigerator is greater than 20 mm the gap
can be reduced to 20 mm by fitting a suitable baffle piece.

6.3

with step

without step

15-20mm

15-20mm

13cm²

13cm²

Deviations shall require the consent of the
manufacturer.

In this case, for gas operation, do not use the upper winter cover!

Correct mounting of the lower ventilation grille facilitates the access to
the electrical and gas connections during maintenance work.

18

Installing the ventilation system6.4

3. Insert the ventilation grilles.

6. Insert winter cover

2. Insert the frame ...

4. Lock the ventilation grilles..

5.Clip the extractor insert in position
(only for upper ventilation system L100)

... and screw into position.

1. Seal the mounting frame, making it waterproof.

Item 1 does not apply for installation framess with an
integrated seal.

To install the ventilation grilles, cut two rectangles (451mm x 156mm) in the
outer wall of the vehicle (for position of the cuts, see point 6.3).

L100

L200

19

Installation recess

The refrigerator must be installed draught-free in a recess.
The measurements of the recess are given in the table below.
Step (A) is only required for cabinets with a step. Push the appliance far enough into
the recess until the front edge of the refrigerator casing is flush with the front of the
recess. Allow a gap of 15-20 mm between the back wall of the recess and the
refrigeration unit. The floor of the recess must be level, allowing the appliance to be
pushed easily into its correct position. The floor must be substantial enough to bear the
weight of the appliance.

Ensure that the refrigerator is installed level in the recess.

Recess measurements:

Model Hight H Width W Depth T Hight HSt Depth TSt

RM 6290 LD 825 mm 529 mm 515 mm 220 mm 235 mm
RM 6291 LD 825 mm 529 mm 515 mm 220 mm 235 mm
RM 6400 LD 825 mm 529 mm 515 mm -- -­RM 6401 LD 825 mm 529 mm 515 mm -- --

RM 6290 LDH 830 mm 529 mm 515 mm 220 mm 235 mm
RM 6291 LDH 830 mm 529 mm 515 mm 220 mm 235 mm
RM 6400 LDH 830 mm 529 mm 515 mm -- -­RM 6401 LDH 830 mm 529 mm 515 mm -- --

Securing the refrigerator

In the sidewalls of the refrigerator, there are four plastic
sleeves with screws for securing the refrigerator. The side­walls or rails attached for securing the refrigerator
must be designed in such a way that the screws will remain
firmly in place even when under increased load (while the
vehicle is moving).

Always insert screws through the sleeves provided;
otherwise, structural parts embedded in the foam, such
as cables, etc., may be damaged.

Once the refrigerator is in its final position, secure the
screws into the wall of

6.5

Width of recess = W

Width of recess = W

6.6

20

Fume extraction

Fume extraction must be arranged in such a way as to provide complete
extraction of all products of combustion to an area outside the living area.
The flue system must slope in an upward direction in order to avoid a

build-up of condensation.

Fitting the fume flue in the upper ventilation grille

1. Connect T-piece (E) to
adaptor (F) or flue pipe
(K) as required and affix
with screw (G). Ensure
that heat baffle (H) is
lodged in the correct
position.

2. Insert flue pipe with cover
plate (C) through the
appropriate aperture in
frame (I) and connect to
T-piece (E). If necessary,
shorten flue pipe (C) to
the required length.

3. Insert ventilation grille

(D) into mounting frame
(I) and fasten, using the
locking handle on the left
of the grille.

4. Put cap (B) on flue pipe (C).

5. Insert extractor insert (A) into ventilation grille (D).
This type of fume extraction allows use a winter cover.

6.7

6.7.1

min. 10 mm
max. 20 mm

An installation that is not carried out by qualified persons causes a
reduction in the cooling capacity and will jeopardize the
manufacturer's guarantee.

21

Separate fume extraction

1. Cut an 80mm x 40mm rectangle in the outer
wall of the caravan. The position of the cut
must be appropriate to the particular model
of refrigerator and installation conditions.

2. Connect T-piece (E) to adaptor (F) or flue
pipe (K) as required and affix with screw
(G). Ensure that heat distributor (H) is
lodged in the correct position.

3. Insert flue pipe (C) through the aperture.

4. Connect flue pipe (C) to T-piece (E). If necessary, shorten flue pipe (C) to the
required length.

5. Pack the cut with non-flammable material (e.g. Rock Wool).

6. Screw securing plate (D) into position.

7. Put cap (B) on flue pipe (C).

8. Screw on outer plate (A).

Gas installation

 The rules in point 6.1 must be adhered to.



When running on gas, these appliances are intended exclusively to use
liquid gas (propane/butane) - under no circumstances should town gas or
natural gas be used (EN 27418).



A fixed, pre-set pressure regulator complying with EN 12864 must be
connected to the liquid gas cylinder.



The pressure regulator must concur with the operating pressure specified
on the data plate of the appliance. The operating pressure corresponds to
the standard pressure of the country of specification (EN 1949, EN 732).



Only one connection pressure is permissible for any one vehicle. A plate
showing the permanent, clearly legible notice must be displayed in full view
at the point where the gas cylinder is installed.



The gas connection (1) to the appliance must be installed securely and at
zero potential using tube connectors and must be securely connected to the
vehicle (a hose connection is not permissible).



Inflamable material should not be in immediate proximity to the burner.

6.7.2

Cut:
80mm high
40mm wide

6.8

min. 10 mm
max. 20 mm

22



The gas connection to the appliance is effected by means of a suitable
coupling tube fitting L8, DIN 2353-ST, complying with EN 1949.

(e.g. Ermeto)

The gas connection may only be carried out by a qualified personnel.

Following proper installation, a testing for
leakage and a flame test must be carried out
by *qualified personnel in compliance with
Worksheet G607 or EN1949 respectively.

A certificate of testing must be issued.

* qualified personnel

Qualified personnel are accredited experts
who are able, by virtue of their training
and knowledge, to vouch for the correct
implementation of the leakage test.

The refrigerator must be equipped with a
gas cock (C) in the supply line to allow the
supply to be disconnected. Such a cutout
device must be readily accessible to the user.

SW 14

SW 17

C

Gas-pressure

BE X

DK X

DE XX

FI X

FR X

GR XX

IE X X

IS X

IT X

LU X X

NL X X

NO X

AT XX

PT X X

SE X

CH X X

ES X

UK X X X

Category I

3P(30)

I

3P(37)

I3P(50) I3+ I

3B/P(50)I3B/P(30)

mbar 30 37 50 28-37 30-37 50 30

23

Electrical installation

Electrical installation may only be carried out by qualified personnel.
The connection cables must be laid in such a way that they do not
come in contact with hot components of the unit/burner or with sharp
edges. The electrical installation must comply with national regulations
(EN 60335-2-24 for Europe). It is advisable to run the incoming supply
through an on-board fuse or automatic circuit breaker. The power cable
must be laid in such a way that it does not come in contact with hot
components of the unit/burner or with sharp edges.

Changes at the internal electrical installation or the connection of other
electrical components (e.g. additional fan, no Dometic part) to the inter­nal wiring of the appliance will expire the e1/ CE admittance as well as
any claims from guarantee and product liability!

Power line connection

The power must be supplied via a properly earthed socket outlet or
hardwired connection.
Where a socket outlet is used for the mains connection lead, the outlet
must be freely accessible.

It is advisable to run the incoming supply through an on-board fuse or automatic
circuit breaker. The power cable must be laid in such a way that it does not come
in contact with hot components of the unit/burner or with sharp edges.

If the connection cable is damaged it must be replaced by the Customer
Service at Dometic, or by respectively qualified personnel, in order to
prevent any hazards.

Battery connection

The machine's mains 12V connection cable is connected (observing correct
polarity) to a terminal strip.The cabling must be direct and by the shortest possible
route to the battery and alternator respectively.
The heating element circuit must be connected to the vehicle battery by a suitable
ignition operated relay in order that the 12V supply is only live while the vehicle
ignition is switched on. It is recommended that the electronic re-igniter and the
interior light is connected to the on-board auxiliary battery.

The 12V circuit must be protected with a 16A fuse.

If the appliance is installed in a caravan the respective leads for 12V+
and 12V- the connections A/B and C/D must not be connected to each
other on the caravan-side ( EN 1648-1).

6.9

6.9.1

6.9.2

A = ground heating element DC (white)
B = connection to the heating element DC (only live

while the vehicle ignition is switched on, red).
C = ground for lighting or/and reigniter (black),
D = connection for lighting or/and reigniter,

permanent DC (12V) available (violet).

Cross-sectional area of cable Length of cable

4mm² < 6 m
6mm² > 6 m

24

Wiring diagrams

1. Wiring diagram with manual ignition and no interior light.

2. Wiring diagram with manual ignition and interior light

battery connection
12V/24V --

mains connection ~

heating­element
DC-

resistor (replaced by a bridge
for 24V battery voltage)

thermo cut-off current

light DC --

reed contacts

(sensor switching)

to casing

to

ca

sin

g

heating­element
AC

~

Battery connection 12V/24V -

A = Ground heating element DC, white
B = heating element DC-, red
C = Ground interior light, black
D = Interior light, violet

battery connection DC

mains connection AC

heating­element
DC

thermo cut-off current

heating­element
AC

6.9.3

25

3. Wiring diagram with automatic ignition and no interior light

4. Wiring diagram with automatic ignition and interior light

spark plug

light DC --

re

e

d

c

o

n

ta

c

ts

(s

e

n

s

o

r s

w

itc

h

in

g

)

* resistor (replaced by a bridge for 24V battery voltage)

ignition control lamp

thermo cut-off current

mains connection ~

to casing

heating­element
AC~

ground

battery connection
12V/24V --

mains connection ~

to casing

thermo cut-off current

heating-elem

ent D

C

-

reigniter

spark plug

to casing

to casing

heating­element
AC~

from battery

heating-element DC -

Battery connection 12V/24V -

A = Ground heating element DC, white
B = Heating element DC-, red
C = Ground automatic ignition, black
D = Automatic ignition violet

ground

ignition control lamp

to casing

battery connection
12V/24V --

* resistor

to casing

Battery connection 12V/24V -

A = Ground heating element DC, white
B = Heating element DC-, red
C = Ground, automatic ignition black

and interior light,

D = Automatic ignition and violet

interior light

from battery

Dometic GmbH

In der Steinwiese 16

D-57074 Siegen

www.dometic.de/caravan

www.dometic.com