AEG-Electrolux F99020IMM User Manual

FAVORIT 99020 I

User manual Dishwasher

Contents

Thank you for choosing one of our high-quality products.

To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe plac e. An d p le as e pass it to any future owner of the appliance.

We wish you much joy with your new appliance.

Contents

Operating instructions 3

Safety information 3

Correct use 3 General safety 3 Child safety 3 Installation 4

Product description 4 Control panel 5

Up and down scrolling buttons (+ -) 5 Display 6 OPTION button 6 CANCEL button 7 OK / START button 7 Switching on for the first time - setting the language 7

First use 8 Set the water softener 8

Setting manually 9 Setting electronically 9

Use of dishwasher salt 9 Use of rinse aid 10

Adjusting the dosage of rinse aid 11

Daily use 11 Load cutlery and dishes 11

The lower basket 12 The cutlery basket 13 Beer glasses 14 The upper basket 16 Adjusting the height of the upper basket

Use of detergent 18

Fill with detergent 18

Multi-tab function 19 Washing programmes 20 Select and start a washing programme 22

Cancel a delay start or a washing programme in progress 22 Interrupt a washing programme in progress

End of the washing programme 22

Unloading the dishwasher 23 Care and cleaning 23

Cleaning the filters 23 Cleaning the spray arms 24 External cleaning 25 Internal cleaning 25 Prolonged periods of non-operation 25 Frost precautions 25 Moving the machine 25

What to do if… 25 Technical data 27 Hints for test institutes 27

Installation instructions 29

Installation 29

Fixing to the adjacent units 29 Levelling 29

Water connection 29

Water supply connections 29 Water inlet hose with safety valve 30 Water outlet hose connection 30

Electrical connection 31

Environment concerns 32

Packaging material 32

Subject to change without notice

Safety information

Operating instructions

Safety information

In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety.

Correct use

• This dishwasher is only intended for washing household utensils suitable for machine washing.

• Do not put any solvents in the dishwasher. This could cause an explosion.

• Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket.

• Only use products (detergent, salt and rinse aid) suitable for dishwashers.

• Avoid opening the door whilst the appliance is in operation, hot steam may escape.

• Do not take any dishes out of the dishwasher before the end of the dishwashing cycle.

• After use, isolate the appliance from the power supply and turn off the water supply.

• This product should be serviced only by an authorised service engineer, and only genuine spare parts should be used.

• Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons will cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.

General safety

• Persons (including children) with reduced physical sensory, mental capabilities or lack of experience and knowledge must not use the appliance. They must have supervision or instruction for the operation of the appliance by a person responsible for their safety.

• Dishwasher detergents can cause chemical burns to eyes, mouth and throat. Could endanger life! Comply with the safety instructions of the dishwasher detergent manufacturer.

• Water in the dishwasher is not for drinking purposes. Detergent residue may still be present in your machine.

• Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves.

• Do not sit or stand on the open door.

Child safety

• This appliance is designed to be operated by adults. Don’t allow children to use the dishwasher unsupervised.

• Keep all packaging well away from children. There is risk of suffocation.

• Keep all detergents in a safe place out of children’s reach.

Product description

• Keep children well away from the dishwasher when the door is open.

Installation

• Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged contact your supplier.

• All packaging must be removed before use.

• Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person.

• For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way.

• Never use the dishwasher if the electrical supply cable and water hoses are damaged; or if the control panel, work top or plinth area are damaged such that the inside of the appliance is freely accessible. Contact your local Service Force centre, in order to avoid hazard.

• All sides of the dishwasher must never be drilled to prevent damage to hydraulic and electric components.

WARNING!

For electrical and water connection carefully follow the instructions given in specific paragraphs.

Product description

1 Upper basket 2 Water hardness dial 3 Salt container 4 Detergent dispenser

Control panel

5 Rinse aid dispenser 6 Rating plate 7 Filters 8 Lower spray arm 9 Upper spray arm

This dishwasher has an internal light that turns on and off when the opening and closing of the dishwasher's door occurs. Internal light is equipped with led lamp CLASS 1 in accordance with EN 60825-1: 1994 + A1: 2002 + A2: 2001. In case that this light has to be replaced, please, contact your local Service Force Centre.

Control panel

1 ON/OFF button 2 Display 3 Up and down scrolling buttons 4 OPTION button 5 CANCEL button 6 OK / START button

A sequence of displayed messages and audible signals will guide you in the setting of the appliance and the selection of a washing programme and options.

Up and down scrolling buttons (+ -)

These two buttons have a double function:

• selecting within programme menu,

Control panel

• selecting within option menu and submenu.

Display

1 This row of individual lamps is divided in two sections: Program menu and Options

menu. Washing programmes: during the progress of the programme these little bars indicate

the phase of the washing programme: prewash - main wash - rinses - drying.

2 In this row several details are displayed:

–

Setting mode guide to the selection of the washing programme - duration time of the programme, options (when together with the washing programme one or more options are set, the update of the programme duration will occur automatically).

–

Once the programme has started indicates the sequence of the running phase and the running time of the programme in progress.

Symbols: indicate the options (see chart).

The symbols have the following meaning:

DELAY START: fixed in setting mode; flashing when countdown in progress

CARE PLUS: illuminated when 70° INTENSIVE programme is set

MULTITAB: illuminated when the MULTITAB function is active.

SOUND VOLUME: exclusion of the acoustic signals.

OPTION button

Press this button to enter a menu of options; press again to exit from the menu.

How to set the options

Press OPTION button.

Press one of the up and down scrolling buttons until desired option is displayed:

DELAY START MULTITAB SETTINGS

Press OK / START to confirm and enter submenu.

Press up and down scrolling buttons until required submenu is displayed.

Press OK / START to confirm.

To exit from the menu press OPTION button.

Option menu Option submenu

DELAY START

MULTITAB

SETTINGS LANGUAGE

Allows the start of the selected washing programme to be delayed for between 1 and 19 hours. The countdown will decrease with steps of 1 hour. Only in the last hour the decrease is in minutes. Once the countdown has elapsed the washing programme will start automatically.

Sets the dishwasher for the use of conventional detergents or combi detergent tablets (3 in 1 - 4 in 1 - 5 in 1 etc...). See MULTITAB function. –

ON function activated. Use combi detergent tablets. The symbol appears in the display.

–

OFF function deactivated. Use conventional detergents.

Allows you to view messages in the required language.

WATER HARDNESS

Allows you to set electronically the water softener.

RINSE AID

Allows you to activate or deactivate the rinse aid dispenser. –

ON activated

–

OFF deactivated

SOUND VOLUME

Allows you to adjust the volume of the acoustic signals (from 0 to 5). Level 0 means the deactivation of the acoustic signals and the corresponding symbol

BRIGHTNESS

Allows you to increase or decrease the brightness of the background of the display, 10 different levels can be selected. Factory setting: level 10.

CONTRAST

A ll ow s y o u t o i nc r ea se or d e cr ea s e t he contrast of the display, 10 different levels can be selected. Factory setting: level 5.

appears in the display.

Control panel

CANCEL button

Press it to:

• cancel a washing programme in progress

• cancel the setting of an option.

OK / START button

Press it to:

• confirm / memorize any option,

• start a washing programme.

Switching on for the first time - setting the language

Press the ON/OFF button.

2. In the display appears the default language message. If you want to confirm the default

language press OK / START.

First use

If you want to set a different language use the up and down scrolling buttons until the required language appears in the display. Press OK / START to confirm.

First use

Before using your dishwasher for the first time:

• Ensure that the electrical and water connections comply with the installation instructions

• Remove all packaging from inside the appliance

• Set the water softener

• Pour 1 litre of water inside the salt container and then fill with dishwasher salt

• Fill the rinse aid dispenser

If you want to use combi detergent tablets such as: "3 in 1", "4 in 1", "5 in 1" etc... set the Multitab function (see "Multitab function").

Set the water softener

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance. The higher the content of these minerals and salts, the harder your water is. Water hardness is measured in equivalent scales, German degrees (°dH), French degrees (°TH) and mmol/l (millimol per litre - international unit for the hardness of water). The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area. The water softener must be set in both ways: manually, using the water hardness dial and electronically.

Water hardness Adjusting the water hardness

°dH °TH mmol/l manually electronically

51 - 70 91 - 125 9,1 - 12,5 2 level 10 yes

43 - 50 76 - 90 7,6 - 8,9 2 level 9 yes

37 - 42 65 - 75 6,5 - 7,5 2 level 8 yes

29 - 36 51 - 64 5,1 - 6,4 2 level 7 yes

23 - 28 40 - 50 4,0 - 5,0 2 level 6 yes

19 - 22 33 - 39 3,3 - 3,9 2 level 5 yes

15 - 18 26 - 32 2,6 - 3,2 1 level 4 yes

11 - 14 19 - 25 1,9 - 2,5 1 level 3 yes

4 - 10 7 - 18 0,7 - 1,8 1 level 2 yes

< 4 < 7 < 0,7 1 level 1 no

setting

Use of salt

Use of dishwasher salt

Setting manually

The dishwasher is factory set at position 2.

1. Open the dishwasher door.

2. Remove the lower basket from the dish-

washer.

3. Turn the water hardness dial to position 1

or 2 (see table).

4. Replace the lower basket.

Setting electronically

The dishwasher is factory set at level 5. Enter Option menu - SETTINGS - WATER HARDNESS . Using the up and down scrolling buttons set the level of the water softener according to the hardness of the water in your area (see chart).

Use of dishwasher salt

WARNING!

Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion.

To fill:

1. Open the door, remove the lower basket and unscrew the cap of the salt container by

turning it anticlockwise.

Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time) .

3. Using the funnel provided, pour in the salt

until the container is full.

4. Replace the cap making sure that there is

no trace of salt on the screw thread or on the gasket.

5. Replace the cap tightly turning it clock-

wise until it stops with a click.

Do not worry if water overflows from the unit when filling with salt, this is quite normal.

The salt container will require topping up periodically.

Use of rinse aid

You are reminded of this by a displayed message REFILL SALT. This occurs only at the start and at the end of the washing programme; during the running of the programme the indication for salt refilling is not active.

The refilling salt message can remain visible for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.

Use of rinse aid

WARNING!

Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.

Rinse aid ensures thorough rinsing, and spot and streak free drying. Rinse aid is automatically added during the last rinse.

1. Open the container by pressing the release

button (A).

2. Add the rinse aid in the container. The

maximum level for filling is indicated by "max".

The dispenser holds about 110 ml of rinse aid, which is sufficient for between 16 and 40 dishwashing cycles, depending upon the dosage setting.

3. Ensure that the lid is closed after every re-

fill.

Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.

The rinse aid container will require topping up periodically. You are reminded of this by a displayed message REFILL RINSE AID.

Daily use

This occurs only at the start and at the end of the washing programme; during the running of the programme the indication for rinse aid refilling is not active.

Adjusting the dosage of rinse aid

According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1= minimum dosage, position 6= maximum dosage). The dose is factory set in position 4.

Increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades.

Daily use

• Check if it's necessary to refill with dishwasher salt or rinse aid.

• Load cutlery and dishes into the dishwasher.

• Fill with dishwasher detergent.

• Select a wash programme suitable for the cutlery and dishes.

• Start the wash programme.

Load cutlery and dishes

Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher.

• Before loading the dishes, you should: – Remove all left over food and debris.

– Soften remnants of burnt food in pans

• When loading the dishes and cutlery, please note: – Dishes and cutlery must not impede the rotation of the spray arms.

– Load hollow items such as cups, glasses, pans, etc. with the opening downwards so

that water cannot collect in the container or a deep base. – Dishes and items of cutlery must not lie inside one another, or cover each other. – To avoid damage to glasses, they must not touch. – Lay small objects in the cutlery basket.

+ 25 hidden pages