AEG-Electrolux F88080VIL User Manual

FAVORIT 88080 VIL

Dishwasher

Instruction book

PERFEKT IN FORM UND FUNKTION

152957 27/0en 16-02-2005 17:50 Pagina 1

Dear customer,

Please read this User Information carefully and keep it to refer to at a later date. Pass it on to any subsequent owner of the appliance.

The following symbols are used in the text:

Safety instructions

Warning! Notes that concern your personal safety. Attention! Notes that show how to avoid damage to the appliance.

Useful tips and hints

Environmental information

Your dishwasher has the new washing system ”IMPULSE WASHING”. With this dishwashing system the motor speed and spray pressure are varied during the wash cycle to achieve better cleaning of the dishes. It is for this reason that the noise level varies during the dishwashing cycle.

152957 27/0en 16-02-2005 17:50 Pagina 2

CONTENTS

Operating instructions 4

Safety instructions 4 Disposal 6 Economical and ecological dishwashing 6 Description of the appliance 7 The control panel 8

First use 12

Prior to using for the first time 13

The water softener 13 Filling with dishwasher salt 15 Rinse aid 16

In daily use 18

Loading cutlery and dishes 18 The lower basket 20 Racks for beer glasses 21 The cutlery basket 22 The upper basket 23 Adjusting the height of the upper basket 25 Use of detergent 26 Different kinds of detergent 27

Washing programmes 29 Starting a washing programme 31 Maintenance and cleaning 34

Cleaning the filters 34

What to do, when... 37

Service 40 Guarantee terms 41

Technical specifications 44

Installation instructions 45

Building-in 45 Levelling 45 Fixing to the adjacent units 45 Water supply connections 46 Water inlet hose with safety valve 47 Water outlet hose connection 48 Electrical connection 49

Hints for test centres 50

Contents

152957 27/0en 16-02-2005 17:50 Pagina 3

OPERATING INSTRUCTIONS

Safety instructions

The safety of AEG electrical appliances conforms to accepted rules of technology and the Appliance Safety Act. We as manufacturers, however, see ourselves as being obliged to familiarise you with the following safety instructions.

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.

This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the appliance.

Installation

● Check your dishwasher for any transport damage. Never connect a

damaged machine. If your dishwasher is damaged, you should contact your supplier.

● For safety reasons it is dangerous to alter the specifications or

attempt to modify this product in any way.

● Any electrical and plumbing work required to install this appliance

should be carried out by a qualified and competent person.

● Care must be taken to ensure that the appliance does not stand on

the electrical supply cable.

● The sides of the dishwasher must never be drilled to prevent

damage to hydraulic components.

Child safety

● This appliance is designed to be operated by adults.

● Children should not be allowed to tamper with the controls or play

with the product.

● Packaging parts may be dangerous for children, who could even be

suffocated! You should therefore keep all packaging well away from children.

Operating instructions

152957 27/0en 16-02-2005 17:50 Pagina 4

● The water in your dishwasher is not for drinking. Detergent residues

may still be present in your machine. Keep children well away from your dishwasher when the door is open.

● Keep all detergents in a safe place out of children’s reach.

Your dishwasher in day-to-day use

● Items that are contaminated by petrol, paint, steel or iron debris,

corrosive, acidic or alkaline chemicals must not be washed in this dishwasher.

● Under no circumstances should you open the door whilst the

appliance is in operation, especially during the washing phase, hot water may escape. However, if the door is opened, a safety device ensures that the machine stops.

● Only use products (detergent, salt and rinse aid) specifically

designed for use in dishwashers.

● Long bladed knives stored in an upright position are a potential

hazard.

● Long and/or sharp items of cutlery such as carving knives must be

positioned horizontally in the upper basket.

● Ensure that the door of the dishwasher is always closed when it is

not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themeselves.

● When finishing loading or unloading close the door, as an open

door can be a hazard.

● Do not sit or stand on the open door.

● Isolate the appliance from the power supply and turn off the water

supply after use.

● This product should be serviced by an authorised service engineer,

and only genuine spare parts should be used.

● Under no circumstances should you attempt to repair the machine

yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.

Operating instructions

152957 27/0en 16-02-2005 17:50 Pagina 5

Disposal

Dispose of the dishwasher packaging material correctly. All packaging materials can be recycled.

Plastic parts are marked with standard international abbreviations: >PE< for polyethylene, e.g. sheet wrapping material.

>PS< for polystyrene, e.g. padding material (always CFC-free). >POM< for polyoxymethylene, e.g. plastic clips.

Cardboard packaging is manufactured from recycled paper and should be deposited in the waste paper collection for recycling.

As and when you cease to use your dishwasher and withdraw it from service, your should render it unserviceable before having it disposed of.

Warning! Children at play could lock themselves in your dishwasher or otherwise endanger their lives. Therefore cut off the power supply cable and make the door closing device unusable to prevent children from being trapped inside.

For the disposing of the appliance please take it to a recycling centre or to your dealer who may, for a small contribution to the costs, dispose it for you.

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Economical and ecological dishwashing

● Ensure that the water softener is correctly adjusted.

● Do not pre-wash under running water.

● Select the wash programme to suit the nature and degree of the

soiling on the dishes.

● Do not use more detergent, special salt and rinse aid than is

recommended in these operating instructions and by the manufacturer of the respective product.

Operating instructions

152957 27/0en 16-02-2005 17:50 Pagina 6

Operating instructions

Description of the appliance

1. Upper basket stop

2. Water hardness dial

3. Salt container

4. Detergent dispenser

5. Control panel

6. Rating plate

7. Rinse aid dispenser

8. Filters

9. Lower spray arm

10. Upper spray arm

11. Upper basket

NOTE: this dishwasher has an

internal light that turns on and off when the opening and closing of the dishwasher’s door occurs. In case that this light has to be replaced, please contact your local Service Force Centre.

IN153

152957 27/0en 16-02-2005 17:50 Pagina 7

Operating instructions

“Direction” buttons: these 2 buttons have a double function:

- selecting within the Programmes menu

- selecting within the Options menu and the submenu.

“Ok start“ button: is necessary for:

- confirm / memorise any option,

- start a washing programme. NOTE: the ok start and option selection buttons, if pressed

simultaneously have the RESET function. This function allows to:

- cancel a washing programme in progress It is also possible to return to the factory setting for the following

options:

LANGUAGE (factory setting: english). BRIGHTNESS (factory setting: level 10).

In setting mode press for about 6 seconds these two buttons simultaneously.

On/Off button

DIRECTION buttons

OK START button

OPTION selection button

The control panel

Display

152957 27/0en 16-02-2005 17:50 Pagina 8

Operating instructions

Option selection button: allows you to enter a menu of options

with relative submenu, press again to exit from menu.

How to set the several options:

1. Press the option selection button.

2. Press the direction buttons until the desired option is displayed:

- DELAY START

- 3 IN 1

- SETTINGS . . .

3. Press the ok start button to select the option.

4. Press the direction buttons until the selection of the desired

submenu is displayed.

MENU SUBMENU

DELAY START Allows the start of the washing programme to be

delayed from 1 hour up to 19 hours.

3 -IN- 1 Sets the dishwasher for the use of conventional,

concentrated detergents or combi detergents (3in1).

-ON

function activated; allows the use of the 3in1 combi detergents, which incorporate detergent, rinse aid and salt functions.

The symbol appears in the display.

With the activation of this function, the rinse aid dispenser and salt container are automatically deactivated and consequently also the display indications for the refilling of salt and rinse aid are deactivated.

-OFF

- for conventional, alkaline detergents with caustic components,

- for low alkaline concentrated detergents with natural enzymes.

SETTINGS . . . allows you to enter another menu of options with relative submenu (see following table): to set the options it is necessary to repeat the setting from point 3.

152957 27/0en 16-02-2005 17:50 Pagina 9

5. Press the ok start button: the option is memorised.

6. For each option it is necessary to repeat the setting from point 2.

7. To exit from menu, press option selection button.

If a programme has been set:

- press ok start button and close the door: the programme will start automatically.

If a programme has not been set:

- press direction buttons until is displayed the desired washing programme

- press ok start button and close the door: the programme will start automatically.

The options can only be set before the start of a washing programme.

Once set, these options will remain activated for the following cycles, until they will be deactivated, except for DELAY START

Operating instructions

MENU SUBMENU

LANGUAGE Allows you to view messages that appear in the display

in the required language. (Factory setting: english).

WATER Allows you to set electronically the water softener HARDNESS according to the hardness of the local area water:

water hardness is measured in 10 levels.

RINSE AID Allows you to deactivate or activate the rinse aid

dosage:

-ONrinse aid dosage activated,

-OFFrinse aid dosage deactivated.

SOUND Allows you to adjust the volume of the alarm signals VOLUME and of the end of programme signal (from 0 to 5).

Level 0 means the deactivation of the volume of all signals and the symbol appears in the display.

BRIGHTNESS Allows you to increase or decrease the brightness of the

background of the display, 10 different levels can be selected.

(this option can be selected ONLY with the 3 in 1 function active)

152957 27/0en 16-02-2005 17:50 Pagina 10

Operating instructions

The symbols have the following meaning:

Symbols: indicate the various options.

In this row several details are displayed:

- setting mode, guide to the selection of the washing programmes, duration time of the programme, options, (when together with the washing programme one or more options are set, the update of the programme duration will occur automatically).

- Once the programme has started, indicates the sequence of the running phases and the running time of the programme in progress.

Washing phases: during the progress of the programme these little bars indicate the phases of the washing programme: prewash, main wash, rinses, drying.

Delay start: fixed in setting mode; flashing when in progress.

3 in 1 detergent option: is illuminated when the function for the use of 3 in 1 combi detergents is active.

Exclusion of the volume for alarm and end of programme audible signals.

Is illuminated when the 70°C Intensive washing programme is set. This programme makes it possible to thoroughly disinfect dishes and glasses, such as baby bottles or jam jars.

152957 27/0en 16-02-2005 17:50 Pagina 11

First use

The first time the dishwasher is switched on, it is possible to select a different language in which the machine will display the messages.

The factory setting is in english therefore the message LANGUAGE ENGLISH will appear in the display; the word ENGLISH flashes.

Press the direction buttons until the language required appears in the display.

To confirm the selection press ok start button. If, instead of a different language, a washing programme is

immediately set, the dishwasher will memorise the display of the messages in English. It will always be possible to select another language another time, simply follow the instructions given for the setting of the options (see: "Option selection button").

Operating instructions

152957 27/0en 16-02-2005 17:50 Pagina 12

Operating instructions

Prior to using for the first time

Before using your dishwasher for the first time:

1. Ensure that the electrical and water connections comply with the installation instructions

2. Remove all packaging from inside the appliance

3. Set the water softener

4. Pour 1 litre of water inside the salt container and then fill with

dishwasher salt

5. Fill the rinse aid dispenser.

The water softener

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.

The higher the content of these minerals and salts, the harder your water is.

Water hardness is measured in equivalent scales, German degrees, French degrees and mmol/l (millimol per litre).

The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

The water softener must be set in both ways: manually, using the water hardness dial and electronically, using the option selection button: option WATER HARDNESS.

Adjusting the water

hardness setting

9 8 7 6

no salt

necessary

Manually

Electronically

Water hardness

51 - 70 43 - 50 37 - 42 29 - 36 23 - 28

9,0 - 12,5 7,6 - 8,9 6,5 - 7,5 5,1 - 6,4 4,0 - 5,0

11 - 14 1,9 - 2,5 II

< 4 < 0,7 I

4 - 10 0,7 - 1,8 I/II

19 - 22 15 - 18

3,3 - 3,9 2,6 - 3,2

III

5 4

9 8 7 6

Level

indicated in

the digital

display

5 4

°dH

(german degrees)

91 - 125 76 - 90 65 - 75 51 - 64 40 - 50

19 - 25

< 7

7 - 18

33 - 39 26 - 32

°TH

(french degrees)

mmol/l

(millimol per litre,

international unit for

the hardness of water)

Range

152957 27/0en 16-02-2005 17:50 Pagina 13

Operating instructions

a)Setting manually

1. Open the dishwasher door.

2. Remove the lower basket from the dishwasher.

3. Turn the water hardness dial to

position 1 or 2 (see table).

4. Replace the lower basket. The dishwasher is factory set at

position 2.

b)Setting electronically

NOTE: the electronic setting of the water softener is possible ONLY

with the 3 in 1 function deactivated. The dishwasher is factory set al level 5.

1. Press the option selection button.

2. Press the direction buttons until SETTING . . . is displayed.

3. Press the ok start button.

4. Press the direction buttons until WATER HARDNESS is displayed.

5. Press the ok start button.

6. Press the direction buttons until the level corresponding to

hardness of the water in your area is displayed.

7. Press the ok start button to confirm the setting.

8. Press the option selection button to exit the Option menu.

152957 27/0en 16-02-2005 17:50 Pagina 14

AA07

Operating instructions

Filling with dishwasher salt

Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion.

To fill:

1. Open the door, remove the lower basket and unscrew the cap of

the salt container by turning it anticlockwise.

2. Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time).

3. Using the funnel provided, pour in the salt until the container is full.

4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.

5. Replace on the cap tightly turning it clockwise until it stops with a click.

The salt container will require topping up periodically. The salt refilling is indicated by a flashing message in the display REFILL SALT.

This occurs only during the setting mode and at the end of the washing programme, during the progress of the washing programme the indication for salt refilling is not active.

The salt refilling indication can remain active from 2 to 6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.

Do not worry if water over flows from the unit when filling with salt, this is quite normal.

152957 27/0en 16-02-2005 17:50 Pagina 15

SR14

Operating instructions

Rinse aid

Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.

Filling with rinse aid

1. Open the container by pressing the release button (A).

2. Add the rinse aid until the container is completely full. The

maximum level for filling is indicated by “max”.

Ensure that the lid is closed after every refill. Clean up any rinse aid spilt during filling with an absorbent cloth

to avoid excess foaming during the next wash. Only use branded rinse aid for dishwashers. Never fill the rinse aid

dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.

152957 27/0en 16-02-2005 17:50 Pagina 16

+ 36 hidden pages