AEG-Electrolux F88080VI User Manual

FAVORIT 88080 Vi

User manual Dishwasher

Dear Customer

Thank you for choosing one of our highquality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best per formance and control  indeed we are setting the highest standards of excel lence. In addition to this you find environmental and energy saving aspects as an inte gral part of our products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfect ly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. We wish you much joy with your new appliance.

The following symbols are used in this user manual: Important information concerning your personal safety and information on

3 General information and tips

how to avoid damaging the appliance.

2 Environmental information

Contents

Operating Instructions 5

Safety 5

Diagram of appliance 6

Control panel 7

Switching on for the first time – setting the language 8

Display 9

Basic operation 10

An overview of the menus 10 Adjusting an option/setting 11

Prior to using for the first time 12

Setting the water softener 12 Adding special salt 14 Filling up with rinse aid 15 Setting the acoustic signal 17

In daily use 18

Loading cutlery and dishes 18 Adjusting the height of the upper basket 22 Adding detergent 23 Using 3in1 detergents 25 Selecting the dishwashing cycle (Cycle Table) 27 Starting a dishwashing cycle 29 Setting the delay start 30 Switching off the dishwasher 31

Care and cleaning 32

3Contents

What to do if … 34

Resetting the language 34 Remedying small malfunctions 34 If the dishwashing results are not satisfactory 37

Disposal 38

Technical data 38

Notes for Test Institutes 39

Contents4

Installation and connection instructions 40

Safety information for the installation 40

Installing the dishwasher 41

Connecting the dishwasher 42

Operating Instructions

1 Safety

Prior to using for the first time

• Follow the ”Instructions for installation and connection”.

Correct use

• The dishwasher is only intended for washing domestic dishes.

• Additions or modifications to the dishwasher are not permitted.

• Use only special salt, detergent and rinse aid suitable for domestic dishwash

ers.

• Do not put any solvents in the dishwasher. This could cause an explosion.

Child safety

• Keep packaging away from children. There is a risk of suffocation.

• Children often do not recognise the hazards associated with electrical appli

ances. Don’t allow children to use the dishwasher unsupervised.

• Make sure that children and pets don’t climb into the dishwasher. Could en danger life!

• Dishwasher detergents can cause chemical burns to the eyes, mouth and throat. Could endanger life! Comply with the safety instructions of the dish washer detergent manufacturer.

• The water in the dishwasher is not for drinking. Risk of chemical burns.

5Operating Instructions

General safety

• Repairs to the dishwasher are only to be carried out by qualified service engi neers.

• When the dishwasher is not being used, switch it off and shut off the water tap.

• Never unplug the appliance by pulling on the cable. Always pull the plug.

• Ensure that the door of the dishwasher is always closed when it is not being

loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves.

• Never sit or stand on the open door.

• If the dishwasher is located in a room where there may be a frost, remove the

connection hose from the tap after each use of the dishwasher.

Diagram of appliance6

Diagram of appliance

Ceiling spray arm

Upper basket spray arm and floor spray arm

Water hardness dial

Dispenser for special salt

Dispenser for detergent

Dispenser for rinse aid

Control panel

Rating plate

Filters

Interior lighting

1 This dishwasher has an internal light that turns on and off when the opening

and closing of the dishwasher’s door occurs. Internal light equipped with led lamp CLASS 1 in accordance with EN 608251: 1994 + A1:2002 + A2:2001 In case that this light has to be replaced, please contact your local Service Force Centre.

Control panel

7Control panel

OPTION button

Display

OK/START button

Direction buttons

Button combination RESET

To use the appliance, always open the dishwasher door first.

Button functions

ON / OFF – Activate/deactivate appliance

Direction but

tons

OPTION – Switching between cycle menu and options menu

OK/START – In cycle menu: start selected cycle

RESET

1) To do this, press the buttons OPTION and OK/START simultaneously.

– Select from menus – Selecting a value when adjusting options or settings

– When rinsing cycle is in progress: text in display switches briefly from cycle

progress display to rinsing cycle display

– Change SETTINGS… (options menu) in Settings submenu – In options menu: open and close settings procedure

– Cancel current cycle – With options and settings: cancel settings procedure – Switching from options menu to cycle menu – Switching from settings submenu to options menu

ON/OFF button

Switching on for the first time – setting the language8

Switching on for the first time – setting the lan guage

1. Press the ON/OFF button. First of all HELLO appears in the display.

As soon as the dishwasher is ready for use, this is replaced by LANGUAGE ENGLISH; the word ENGLISH is flashing.

2. Using the direction buttons ( or ) select the desired language.

3. Press the OK/START button. This will have changed the display to the

desired language. CHOOSE PROGRAMME is shown in the display.

3 If you want to change the language at a later time, please see the section “Re

setting the language”.

3 You can adjust the display lighting, by changing the settings BRIGHTNESS and

CONTRAST

; see section “Basic operation”.

1. not available with all models

Display

9Display

Information bar

Symbol line

Text line

The information bar consists of a row of illuminated elements.

• In the cycle menu, you can see which position you are currently at within this

menu (the appropriate light will flash).

• During a rinsing cycle, the information bar functions as a cycle progress dis

play. This allows you to see how many cycle sections have still to be completed (including the current cycle section).

The text in the cycle menu shows the name of the selected cycle and the pre dicted time remaining in minutes.

• In the options menu, the name of the selected option or setting is shown

along with the currently set value.

• When a rinsing cycle is in progress, you can see in the text display the name of

the current stage of the cycle and the predicted time remaining for the whole rinsing cycle. The OPTION button allows you to briefly view the name of the rinsing cycle.

• In the case of a malfunction, a help text will be displayed. The symbols in the row of symbols have the following meanings:

– Option DELAY START active

– Programme selected for the hygienic cleaning of e.g. babies’ bottles

– Option 3 IN 1 active

– Loudspeaker is switched off; no acoustic signals (SOUND VOLUME setting)

Basic operation10

Basic operation

This section contains basic information regarding the use of your dishwasher. Please read this section very carefully.

An overview of the menus

Programmes menu

AUTOMATIC

30 MINUTES

70° INTENSIVE

65° NORMAL

ENERGY

50° NORMAL

45° GLASS

PREWASH

OPTION

button

Options menu

DELAY START

SETTINGS…

OK/START

LANGUAGE

WATER HARDNESS

RINSE AID

SOUND VOLUME

BRIGHTNESS

CONTRAST

1. not available with all models

3IN1

button

The Programmes menu

• After switching on the dishwasher you will find yourself in the Programmes

menu.

• Select your dishwashing cycle here using the direction buttons ( or ). In

the info status bar your position within the menu is always shown.

• Change to the Options menu using the OPTION button.

The Options menu

• Here go to the desired setting using the direction buttons ( or ).

• For the option DELAY START see the section “Setting a delay start” for the op

tion 3 IN 1 see the section “Before using for the first time”

• Use the OK/START button to switch from the menu item SETTINGS… to the

Settings submenu.

The Settings submenu

Here go to the desired setting using the direction buttons ( or ).

• LANGUAGE

To set the language of the text line in the display; also see the section “Reset ting the language”.

• WATER HARDNESS

To set the value for water hardness electronically (value range 1 to 10).

• RINSE AID

When option 3 IN 1 is activated: Switch rinseaid addition function on or off. When option 3 IN 1 is not activated: The rinseaid addition function is always switched on, even if OFF is selected for RINSEAID.

• SOUND VOLUME

To set the sound volume of the acoustic signals (value range 0 to 5); at 0 the acoustic signals are switched off.

• BRIGHTNESS

To set the brightness of the display (value range 1 to 10).

• CONTRAST

To set the contrast of the display (value range 1 to 10).

11Basic operation

Adjusting an option/setting

1. Go to the option or setting you want to adjust.

2. Press the OK/START button. The value currently selected will flash.

3. Use the direction buttons ( or ) to select the value required.

4. Press the OK/START button. The newly selected value will be lit up continuously.

5. You can use the direction buttons ( or ) to select another option or setting.

3 By pressing OPTION a selected value is entered. The display will show the first

entry in the options/settings menus.

3 You can use the key combination RESET to cancel a settings procedure.

Prior to using for the first time12

Prior to using for the first time

If you wish to use 3 in 1 detergent: – First read the section “Using 3in1 detergents”. – Do not fill up with special salt or rinse aid.

If you do not use 3in1 detergent, before using for the first time

1. Set the water softener

2. Fill up with special salt for water softeners

3. Fill up with rinse aid

Setting the water softener

The water softener must be set manually and electronically:

3 To avoid scale deposits on the dishes and in the dishwasher, the dishes must be

washed with soft water, i.e. water with a low lime content. The water softener must be set according to the table to the water hardness in the area where you live. Your local water company will be able to give you information about the water hardness in your area.

The dishwasher must be switched off.

Setting manually:

1. Open the dishwasher door.

2. Remove the lower basket from the

dishwasher.

3. Turn water hardness dial on the left wall of the dishwasher interior to 1 or 2 (see table).

13Prior to using for the first time

Setting electronically:

1. Press the ON/OFF button.

3 If the name of a stage of a cycle is shown on the display, this means a rinsing cy

cle is active. You must first of all cancel the rinsing cycle:

– Press the RESET key combination.

The display will read CONFIRM CANCEL?

– Press the OK/START button. This will cancel the rinsing cycle.

2. Go to the WATER HARDNESS setting; see section “Adapting an option/setting”.

3. Set WATER HARDNESS to the right setting.

If the water softener is set electronically to “1” this switches off the display of the REFILL SALT message.

Water hardness Adjusting the hardness setting

in °d

51  70 43  50 37  42 29  36 23  28

19  22 15  18

11  1 4 1,9  2,5 II 3

4  10 0,7  1,8 I/II 2

below 4 below 0.7 I

1) (°d) German degree, measure of the hardness of water

2) [mmol/l] millimol per litre, international unit for water hardness

3) On this setting the length of the dishwashing cycle may be slightly longer. *) factory setting

in mmol/l

9,0  12,5

7,6  8,9 6,5  7,5 5,1  6,4 4,0  5,0

3,3  3,9 2,6  3,2

Range Manual Electronic

III

8 7 6

no salt necessary

Prior to using for the first time14

Adding special salt

To decalcify the water softener, it must be filled up with special salt. Use only special salt suitable for domestic dishwashers.

If you do not use 3 in1 detergent, fill up with special salt:

– Before using the dishwasher for the first time. – If when starting a cycle the message REFILL SALT is displayed.

1. Open the door and remove the lower basket.

2. Screw open the lid on the salt dispenser by turning it anticlockwise.

3. Only when using the dishwasher for the first time:

Fill the salt dispenser with water.

4. Place the funnel (supplied) over the dis penser opening. Fill the dispenser with special salt; the ca pacity of the dispenser is approx. 1.01.5 kg, depending on the size of the grains. Do not overfill the dispenser.

3 If water overflows when filling up with special salt, this is completely harmless.

5. Clean away any salt remnants from the dispenser opening.

6. Screw the lid back on in a clockwise direction.

7. Run a dishwashing cycle after filling the salt dispenser with special salt.

This will wash away salt water and salt crystals that have been spilt.

3 Depending on the size of the grains, it can take several hours for the salt to dis

solve in the water and for the message REFILL SALT not to be displayed when starting a dishwashing cycle.

+ 30 hidden pages