Page 1
FAVORIT 88072
EN DISHWASHER USER MANUAL
Page 2
www.aeg.com
2
CONTENTS
4 SAFETY INFORMATION
6 PRODUCT DESCRIPTION
7 CONTROL PANEL
8PROGRAMMES
10 OPTIONS
11 BEFORE FIRST USE
13 DAILY USE
15 HINTS AND TIPS
16 CARE AND CLEANING
17 TROUBLESHOOTING
19 INSTALLATION
20 TECHNICAL INFORMATION
ENVIRONMENT CONCERNS
Recycle the materials with the symbol . Put the packaging in applicable containers to
recycle it.
Help protect the environment and human health and to recycle waste of electrical and
electronic appliances. Do not dispose appliances marked with the symbol
household waste. Return the product to your local recycling facility or contact your
municipal office.
with the
VISIT OUR WEBSITE FOR:
- Products
- Brochures
- User manuals
- Trouble shooter
- Service information
www.aeg.com
LEGEND
Warning - Important Safety information.
General information and tips
Environmental information
Subject to change without notice.
Page 3
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please spend
a few minutes reading to get the very best from it.
ACCESSORIES AND CONSUMABLES
In the AEG webshop, you’ll find everything you need to keep all your AEG
appliances looking spotless and working perfectly. Along with a wide range of
accessories designed and built to the high quality standards you would expect, from
specialist cookware to cutlery baskets, from bottle holders to delicate laundry bags…
ENGLISH
3
Visit the webshop at:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available. The
information can be found on the rating plate.
Model
PNC
Serial Number
Page 4
www.aeg.com
4
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and
use causes injuries and damages. Always
keep the instructions with the appliance
for future reference.
CHILDREN AND VULNERABLE
PEOPLE SAFETY
WARNING!
Risk of suffocation, injury or permanent disability.
• Do not let persons, children included,
with reduced physical sensory, reduced
mental functions or lack of experience
and knowledge use the appliance. They
must have supervision or instruction for
the operation of the appliance by a person who is responsible for their safety.
Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep all detergents away from children.
• Keep children and pets away from the
appliance door when it is open.
INSTALLATION
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not install or use the appliance
where the temperature is less than 0 °C.
• Obey the installation instruction supplied with the appliance.
Water connection
• Make sure not to cause damage to the
water hoses.
• Before you connect the appliance to
new pipes or pipes not used for a long
time, let the water flow until it is clean.
• The first time you use the appliance,
make sure that there is no leakage.
• The water inlet hose has a safety valve
and a sheath with an inner mains cable.
WARNING!
Dangerous voltage.
• If the water inlet hose is damaged, immediately disconnect the mains plug
from the mains socket. Contact the
service to replace the water inlet hose.
Electrical connection
WARNING!
Risk of fire and electrical shock.
• The appliance must be earthed.
• Make sure that the electrical information on the rating plate agrees with the
power supply. If not, contact an electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable.
Contact the service or an electrician to
change a damaged mains cable.
• Connect the mains plug to the mains
socket only at the end of the installation. Make sure that there is access to
the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the
mains plug.
• Only for UK and Ireland. The appliance has a 13 amp mains plug. If it is
necessary to change the fuse in the
mains plug, use a 13 amp ASTA (BS
1362) fuse.
Page 5
USE
• This appliance is intended to be used in
household and similar applications such
as:
– Staff kitchen areas in shops, offices
and other working environments
– Farm houses
– By clients in hotels, motels and other
residential type environments
– Bed and breakfast type environ-
ments.
WARNING!
Risk of injury.
• Do not change the specification of this
appliance.
• Put knives and cutlery with sharp points
in the cutlery basket with the points
down or in a horizontal position.
• Do not keep the appliance door open
without supervision to prevent to fall on
it.
• Do not sit or stand on the open door.
• Dishwasher detergents are dangerous.
Obey the safety instructions on the detergent packaging.
• Do not drink and play with the water in
the appliance.
• Do not remove the dishes from the appliance until the programme is completed. There can be detergent on the
dishes.
WARNING!
Risk of electrical shock, fire or
burns.
ENGLISH
• Cut off the mains cable and dispose of
it.
• Remove the door catch to prevent children and pets to get closed in the appliance.
5
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
• Do not use water spray and steam to
clean the appliance.
• The appliance can release hot steam if
you open the door while a programme
operates.
DISPOSAL
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
Page 6
www.aeg.com
6
PRODUCT DESCRIPTION
Worktop
1
Top spray arm
2
Upper spray arm
3
Lower spray arm
4
Filters
5
Rating plate
6
Salt container
7
Water hardness dial
8
Rinse aid dispenser
9
Detergent dispenser
10
Cutlery basket
11
Lower basket
12
Upper basket
13
13
12
11
10
2
1
5
9
8
6
7
4
3
Page 7
CONTROL PANEL
1
ENGLISH
7
AB
C
On/off button
1
Program touchpad
2
Programme indicators
3
Display
4
2 3
8 7
Indicators Description
Multitab indicator.
ÖKO PLUS indicator.
ExtraHygiene indicator.
Washing phase indicator.
Rinsing phase indicator.
Drying phase indicator.
End indicator.
5
4
6
Delay touchpad
5
Start touchpad
6
Indicators
7
Option touchpad
8
Rinse aid indicator. This indicator is off while the
programme operates.
Salt indicator. This indicator is off while the programme operates.
Delay indicator.
Door indicator. It comes on when the door is not
closed.
Page 8
www.aeg.com
8
PROGRAMMES
Programme Degree of soil
Type of load
1)
All
Crockery, cutlery,
pots and pans
Programme
phases
Prewash
Wash from 45 °C to 70
°C
Options
ExtraHygiene
ÖKO PLUS
Rinses
Dry
2)
Heavy soil
Crockery, cutlery,
pots and pans
Prewash
Wash 70 °C
Rinses
ÖKO PLUS
Dry
3)
Normal soil
Crockery and cutlery
Prewash
Wash 50 °C
Rinses
Dry
4)
Fresh soil
Crockery and cut-
Wash 60 °C
Rinse
ExtraHygiene
lery
5)
Normal soil
Crockery and cutlery
Prewash
Wash 50 °C
Rinses
ExtraHygiene
ÖKO PLUS
Dry
6)
Mixed soil
Crockery, cutlery,
pots and pans
Prewash
Wash 70 °C
Rinses
ÖKO PLUS
Dry
Normal or light soil
Delicate crockery
and glassware
7)
1)
The appliance senses the degree of soil and the quantity of items in the baskets. It
automatically adjusts the temperature and quantity of the water, the energy consumption
and the programme duration.
2)
This programme includes the ExtraHygiene option.
3)
This is the most silent washing programme. The pump works at a very low speed to
decrease the level of noise. Because of the low speed, the programme duration is long.
4)
With this programme you can wash a load with fresh soil. It gives good washing results in a
short time.
5)
This is the standard programme for test institutes. With this programme you have the most
efficient use of water and energy consumption for crockery and cutlery with normal soil.
6)
With this programme you can wash a load with mixed soil. Very heavy soil in the lower
basket and normal soil in the upper basket. The water pressure and the water temperature
in the lower basket are higher than in the upper basket.
7)
Use this programme to quickly rinse the dishes. This prevents the remaining food to bond
on the dishes and bad odours to come out from the appliance.
Do not use detergent with this programme.
All Prewash
Wash 45 °C
Rinses
Dry
ÖKO PLUS
Page 9
ENGLISH
Consumption values
Programme
1)
Duration
(min)
Energy
(kWh)
Water
(l)
40 - 150 0.6 - 1.4 7 - 14
150 - 160 1.4 - 1.6 13 - 15
200 - 220 1.1 - 1.2 9 - 11
30 0.8 9
170 - 180 0.9 - 1.0 9 - 10
130 - 140 1.3 - 1.5 14 - 15
70 - 80 0.8 - 0.9 11 - 12
14 0.1 4
1)
The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the programme duration and the
consumption values.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.
9
Page 10
www.aeg.com
10
OPTIONS
Activate or deactivate the options
before the start of a programme.
You cannot activate or deactivate
the options while a programme
operates.
If one or more options are set,
make sure that the related indicators are on before the programme
starts.
MULTITAB
Activate this option only when you use the
combi detergent tablets.
This option deactivates the flow of rinse
aid and salt. The related indicators are off.
The programme duration can increase.
• Press Option again and again until the
multitab indicator comes on.
• The option stays on until you deactivate
it. Press Option again and again until
the multitab indicator goes off.
If you stop to use the combi detergent
tablets, before you start to use
separately detergent, rinse aid and
dishwasher salt, do these steps:
1. Deactivate the multitab option.
2. Set the water softener to the highest
level.
3. Make sure that the salt container and
the rinse aid dispenser are full.
4. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
5. Adjust the water softener to the water
hardness in your area.
6. Adjust the released quantity of rinse
aid.
EXTRAHYGIENE
This option gives better results for the hygiene. During the rinsing phase, the temperature stays at 70 °C for 10 to 14 minutes.
Press Option again and again until the ExtraHygiene indicator comes on.
If the option is not applicable to the programme, the indicator does not come on.
ÖKO PLUS
This function decreases the temperature
in the drying phase. The energy consumption decreases by 25%.
The dishes can be wet at the end of the
programme.
Press Option again and again until the
ÖKO PLUS indicator comes on.
If the option is not applicable to the programme, the indicator does not come on.
Page 11
BEFORE FIRST USE
ENGLISH
11
1. Make sure that the set level of the wa-
ter softener agrees with the water
hardness in your area. If not, adjust the
water softener. Contact your local water authority to know the water hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the ap-
pliance. Start a programme to remove
them. Do not use detergent and do
not load the baskets.
If you use the combi detergent
tablets, activate the multitab option.
ADJUSTING THE WATER SOFTENER
Water hardness
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
51 - 70 91 - 125 9.1 - 12.5 64 - 88
43 - 50 76 - 90 7.6 - 9.0 53 - 63
37 - 42 65 - 75 6.5 - 7.5 46 - 52
29 - 36 51 - 64 5.1 - 6.4 36 - 45
23 - 28 40 - 50 4.0 - 5.0 28 - 35
19 - 22 33 - 39 3.3 - 3.9 23 - 27
15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2
< 4 < 7 < 0.7 < 5
1)
Factory position.
2)
Do not use salt at this level.
You must adjust the water softener manually and electronically.
Water softener
adjustment
Manual Elec-
1)
2
1)
2
1)
2
1)
2
1)
2
1)
2
2)
1
tronic
10
9
8
7
6
1)
5
2)
1
Manual adjustment
Turn the water hardness dial to the position 1 or 2.
Page 12
www.aeg.com
12
Electronic adjustment
1. Press the on/off button to activate the
appliance.
2. Make sure that the appliance is in set-
ting mode. Refer to ‘SETTING AND
STARTING A PROGRAMME’.
3. Press and hold Delay and Start at the
same time until the indicators (A), (B)
and (C) flash.
FILLING THE SALT CONTAINER
4. Press Program.
• The indicators (B) and (C) go off.
• The indicator (A) continues to flash.
• The display shows the setting of the
water softener. Example:
el 5.
5. Press Program again and again to
change the setting.
6. Deactivate the appliance to confirm.
1.
Turn the cap counterclockwise and
open the salt container.
2.
Put 1 litre of water in the salt container (only for the first time).
3.
Fill the salt container with dishwasher
salt.
4.
Remove the salt around the opening
of the salt container.
5.
Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it, after you fill the salt container, start
a programme.
= lev-
FILLING THE RINSE AID DISPENSER
A
B
A
X
M
2
1
3
4
+
-
1.
2.
3.
4.
C
D
Press the release button (D) to open
the lid (C).
Fill the rinse aid dispenser (A), no
more than the mark 'max'.
Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
Close the lid. Make sure that the release button locks into position.
You can turn the selector of the
released quantity (B) between position 1 (lowest quantity) and position 4 (highest quantity).
Page 13
DAILY USE
M
A
X
1
2
3
4
+
-
ENGLISH
13
1. Open the water tap.
2. Press the on/off button to activate the
appliance. Make sure that the appliance is in setting mode, refer to ’SETTING AND STARTING A PROGRAMME’.
• If the salt indicator is on, fill the salt
container.
USING THE DETERGENT
B
A
30
20
C
SETTING AND STARTING A
PROGRAMME
Setting mode
The appliance must be in setting mode to
accept some operations.
The appliance is in setting mode when,
after the activation:
• All the programme indicators come on.
• The display shows two horizontal status
bars.
If the control panel shows other conditions, press and hold Delay and Start at
the same time until the appliance is in setting mode.
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate the
3. Close the appliance door.
4. Make sure that the appliance is in set-
appliance.
ting mode.
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
for the type of load and the degree of
soil.
1.
Press the release button (B) to open
the lid (C).
2.
Put the detergent in the compartment (A) .
3.
If the programme has a prewash
phase, put a small quantity of detergent on the inner part of the appliance door.
4.
If you use detergent tablets, put the
tablet in the compartment (A).
5.
Close the lid. Make sure that the release button locks into position.
5. Press Program again and again until
the indicator of the programme that
you want to set comes on.
• The programme duration flashes in
the display.
• The phase indicators of the set pro-
gramme come on.
6. If you want, you can set the options.
7. Press Start. The programme starts.
• Only the indicator of the phase in
operation stays on.
• The display shows the programme
duration that decreases with steps
of 1 minute.
Starting a programme with
delay start
1. Set the programme and the options.
2. Press Delay again and again until the
display shows the delay time you want
to set (from 1 to 24 hours).
• The delay time flashes in the dis-
play.
• The delay indicator is on.
3. Press Start. The countdown starts.
Page 14
www.aeg.com
14
• The display shows the countdown of
the delay start that decreases with
steps of 1 hour.
• The phase indicators of the set programme go off.
• When the countdown is completed, the
programme starts.
– The indicator of the phase in opera-
tion comes on.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while
the countdown operates
Press Delay again and again until:
• The display shows the programme duration.
• The phase indicators come on.
• The programme starts.
Cancelling the programme
Press and hold Delay and Start at the
same time until:
• All the programme indicators come on.
• The display shows 2 horizontal status
bars.
Make sure that there is detergent
in the detergent dispenser before
you start a new programme.
• Let the dishes become cold before you remove them from the
appliance. Hot dishes can be
easily damaged.
• First remove the items from the
lower basket, then from the upper basket.
• There can be water on the sides
and on the door of the appliance. Stainless steel becomes
cool more quickly than the
dishes.
At the end of the programme
When the programme is completed, the
end indicator comes on and the display
shows 0.
1. Press the on/off button to deactivate
the appliance.
2. Close the water tap.
If you do not press the on/off button, the Auto Off device automatically deactivates the appliance after some minutes. This
helps to decrease the energy consumption.
Page 15
HINTS AND TIPS
ENGLISH
15
THE WATER SOFTENER
Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these minerals.
The dishwasher salt keeps the water softener clean and in good conditions. It is
important to set the right level of the water softener. This makes sure that the water softener uses the correct quantity of
dishwasher salt and water.
LOADING THE BASKETS
Refer to the supplied leaflet with
examples of the load of the baskets.
• Only use the appliance to wash items
that are dishwasher-safe.
• Do not put in the appliance items made
of wood, horn, aluminium, pewter and
copper.
• Do not put in the appliance items that
can absorb water (sponges, household
cloths).
• Remove remaining food from the items.
• Make soft the remaining burned food
on the items.
• Put hollow items (cups, glasses and
pans) with the opening down.
• Make sure that cutlery and dishes do
not bond together. Mix spoons with
other cutlery.
• Make sure that glasses do not touch
other glasses.
• Put small items in the cutlery basket.
• Put light items in the upper basket.
Make sure that the items do not move.
• Make sure that the spray arms can
move freely before you start a programme.
• The rinse aid helps, during the last rinsing phase, to dry the dishes without
streaks and stains.
• Combi detergent tablets contain detergent, rinse aid and other added agents.
Be sure that these tablets are applicable to the water hardness in your area.
Refer to the instructions on the packaging of the products.
• Detergent tablets do not fully dissolve
with short programmes. To prevent detergent residues on the tableware, we
recommend that you use the tablets
with long programmes.
Do not use more than the correct
quantity of detergent. Refer to the
instructions on the detergent
packaging.
BEFORE STARTING A
PROGRAMME
Make sure that:
• The filters are clean and correctly installed.
• The spray arms are not clogged.
• The position of the items in the baskets
is correct.
• The programme is applicable for the
type of load and for the degree of soil.
• The correct quantity of detergent is
used.
• There is dishwasher salt and rinse aid
(unless you use combi detergent tablets).
• The cap of the salt container is tight.
USING SALT, RINSE AID AND
DETERGENT
• Only use salt, rinse aid and detergent
for dishwasher. Other products can
cause damage to the appliance.
Page 16
www.aeg.com
16
CARE AND CLEANING
WARNING!
Before maintenance, deactivate
the appliance and disconnect the
mains plug from the mains socket.
CLEANING THE FILTERS
C
B
A1
A2
Dirty filters and clogged spray
arms decrease the washing results.
Make a check regularly and, if
necessary, clean them.
1.
Turn the filter (A) counterclockwise and remove it.
2.
C
A
To disassemble the filter (A),
pull apart (A1) and (A2).
3.
Remove the filter (B).
4.
Wash the filters with water.
5.
Put the filter (B) to its initial position. Make sure that it assembles correctly under the two
guides (C).
6.
Assemble the filter (A) and put
it into position in filter (B). Turn
it clockwise until it locks.
An incorrect position of the
filters can cause bad washing results and damage to
the appliance.
CLEANING THE SPRAY ARMS
Do not remove the spray arms.
If the holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
EXTERNAL CLEANING
Clean the appliance with a moist soft
cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.
Page 17
TROUBLESHOOTING
ENGLISH
17
The appliance does not start or it stops
during operation.
Before you contact the Service, refer to
the information that follows for a solution
to the problem.
With some problems, the display shows
an alarm code:
•
- The appliance does not fill with
water.
•
- The appliance does not drain the
water.
•
- The anti-flood device is on.
WARNING!
Deactivate the appliance before
you do the checks.
Problem Possible cause Possible solution
The programme
does not start.
The mains plug is not connected in the mains socket.
Connect the mains plug.
The appliance door is open. Close the appliance door.
You did not press Start. Press Start.
The fuse in the fuse box is
Replace the fuse.
damaged.
The delay start is set. Cancel the delay start or
wait for the end of the
countdown.
The appliance does
The water tap is closed. Open the water tap.
not fill with water.
The water pressure is too
low.
The water tap is clogged or
Contact your local water authority.
Clean the water tap.
there is limescale on it.
The filter in the water inlet
Clean the filter.
hose is clogged.
The water inlet hose has a
kink or a bend.
The anti-flood device is on.
There are water leakages in
Make sure that the position
of the hose is correct.
Close the water tap and
contact the Service.
the appliance.
The appliance does
The sink spigot is clogged. Clean the sink spigot.
not drain the water.
The water drain hose has a
kink or a bend.
After the checks are completed, activate
the appliance. The programme continues
from the point of interruption.
If the problem occurs again, contact the
Service.
If the display shows other alarm codes,
contact the Service.
IF THE WASHING AND
DRYING RESULTS ARE NOT
SATISFACTORY
Whitish streaks or bluish layers on
glasses and dishes
• The released quantity of rinse aid is too
much. Adjust the rinse aid selector to a
lower position.
Make sure that the position
of the hose is correct.
Page 18
www.aeg.com
18
• The quantity of detergent is too much.
Stains and dry water drops on glasses
and dishes
• The released quantity of rinse aid is not
sufficient. Adjust the rinse aid selector
to a higher position.
• The quality of the detergent can be the
cause.
Dishes are wet
• The programme is without a drying
phase or with a low temperature drying
phase.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the
cause.
• The quality of the combi detergent tablets can be the cause. Try a different
brand or activate the rinse aid dispenser and use rinse aid together with the
combi detergent tablets.
Refer to ‘HINTS AND TIPS’ for
other possible causes.
Activating the rinse aid
dispenser with the multitab
function activated
1. Press the on/off button to activate the
appliance.
2. Make sure that the appliance is in set-
ting mode. Refer to ‘SETTING AND
STARTING A PROGRAMME’.
3. Press and hold Delay and Start at the
same time until the indicators (A), (B)
and (C) flash.
4. Press Option .
• The indicators (A) and (C) go off.
• The indicator (B) continues to flash.
• The display shows the setting of the
rinse aid dispenser.
Off
On
5. Press Option to change the setting.
6. Deactivate the appliance to confirm.
7. Adjust the released quantity of rinse
aid.
8. Fill the rinse aid dispenser.
Page 19
INSTALLATION
WARNING!
Refer to “SAFETY INFORMATION”.
INSTALLATION UNDER A KITCHEN COUNTER
570-600 mm
820 mm
600 mm
1
ENGLISH
1.
Make sure that the dimensions
19
of the recess agree with the dimensions in the figure.
2.
Put the appliance adjacent to
a water tap and a water drain.
3.
Remove the worktop of the
appliance.
4.
Loosen or tighten the adjustable feet for a correct level of
the appliance.
With a correct level the appliance door closes and seals
correctly.
5.
Install the appliance under the
kitchen counter.
2
3
4
Page 20
www.aeg.com
20
WATER DRAIN CONNECTION
max. 850 mm
max.
4000 mm
min. 400 mm
A
Connect the water drain hose to:
• The sink spigot. Attach the water drain
hose under the kitchen counter. This
prevents that waste water from the sink
goes back to the appliance.
• A stand pipe with vent-hole. The internal diameter must be minimum 40 mm.
Remove the sink plug when the appliance
drains. This prevents water to go back to
the appliance.
An extension hose for the water drain
hose must be shorter than 2 m and with
the same diameter as the water drain
hose.
If you connect the water drain hose to a
trap spigot under the sink, remove the
plastic membrane (A). A not complete removal of the membrane causes a blockage in the spigot and problems with
drain.
The appliance has a non-return valve that
prevents dirty water to go back to the appliance. If there is a non-return valve in
the sink spigot, remove it to prevent the
appliance to drain incorrectly.
TECHNICAL INFORMATION
Dimensions Width / Height / Depth (mm) 596 / 850 / 610
Electrical connection Refer to the rating plate.
Voltage 220-240 V
Frequency 50 Hz
Water supply pressure Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 )
Water supply
Capacity Place settings 12
Power consumption Left-on mode 0.10 W
1)
Connect the water inlet hose to a water tap with a 3/4'' thread.
2)
If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian
energy), use the hot water supply to decrease energy consumption.
1)
Cold water or hot water
Off-mode 0.10 W
2)
max. 60 °C
Page 21
ENGLISH
21
Page 22
www.aeg.com
22
Page 23
ENGLISH
23
Page 24
www.aeg.com/shop 117922050-A-082012
Loading...