AEG-Electrolux EW962F User Manual
Specifications and Main Features
- Dimensions of the machine: Height 85cm, Width 60cm, Depth 57cm
- Power Supply Voltage/Frequency:220 – 230V/50 Hz range electricity supply
- The total wattage absorbed: 2200 watts and in some countries 2000 watts
- Minimum Protection Fuse: 10 ampere
- Minimum and maximum pressure requirements for water: 5N/cm² and 80N/cm² respectively
- Maximum Capacity (as per the load): Cotton 6.5kg, Synthetics with Delicate Fabrics 2kg, Woollens 1 kg
- The rate of spin: 900 rpm
Frequently Asked Questions
- Q: What should I do if the machine does not start?
A: In such situations always ensure the door is completely closeed , check whether the main supply is connected, make sure the wall electricity socket is functional and that the main fuse has not blown.
- Q: Why is the machine not filling with water?
A: Check if the manual water switch is turned on, check if the water is being pumped from the tap. Also check the inlet hose if it is either bent or squashed.
- Q: What if the machine fills and then empties immediately?
A: You might be experiencing this problem because the drain hose has been placed very low. To identify the right position range refer to the section on water drainage.
- Q: What actions can I take to fix a device that is consistently failing to spin?
A: Ensure the drain hose is not bent, check and clean the drain filter if it is dirty, or re-distribute the load in order to allow proper spinning of the machine.
- Q: There is water on the floor. What extra steps can I take to eliminate this problem?
A: Excess detergent may use inappropriately or inspect the inlet hose fitting for any signs of leaks which may cause spillage.
- Q: How do I further enhance the performance of the washing?
A: Use the appropriate amount of detergent and pre-treat stubborn stains to eliminate them completely before washing.
User Manual
Loading...