AEG-Electrolux EUN1272 User Manual

GEBRAUCHSANWEISUNGEN

INSTRUCTION MANUAL

2222 724-90

EUN 1272

Gefrierschrank

freezer

CONTENTS

Instructions for the User

Important Safety Instructions 14 Use 16

Cleaning the interior 16 Control panel 16 Operation 16 Temperature regulation 16 Quick freezing 17 Warning light 17 Acoustic alarm 17 Freezing calendar 17 Freezing of fresh foods 17 Storage of commercially frozen food 17 Thawing 17 Ice-cube production 17

Tips 18

Tips for freezing fresh foods 18 Tips for storage of commercially frozen food 18

Maintenance 18

Periodic cleaning 18 Periodios of non-operation 18 Defrosting 18

Something not Working 19

Instructions for the Installer

Technical specifications 20 Installation 20

Positioning 20 Electrical connection 20 Door reversal 20 Instructions for totally built-in appliances 21

IMPORTANT SAFETY INSTRUCTIONS

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings. These warnings are provided in the interest of safety.You must read them carefully before installing or using the appliance.

■

This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorised technicians.

Use

■

The domestic refrigerators and freezers are designed to be used specifically for the storage of edible foodstuffs only.

■

Frozen food must not be re-frozen once it has been thawed out.

■

Manufacturers’ storage recommendations should be strictly adhered to. Refer to relevant instructions.

■

The inner lining of the appliance consists of channels through which the refrigerant passes. If these should be punctured this would damage the appliance beyond repair and cause food loss. DO NOT USE SHARP INSTRUMENTS to scrape off frost or ice. Frost may be removed by using the scraper provided. Under no circumstances should solid ice be forced off the liner. Solid ice should be allowed to thaw when defrosting the appliance. See defrost instructions.

■

Do not place carbonated or fizzy drinks in the freezer as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance. Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer. Never use metal objects for cleaning your appliance as it may get damaged.

Installation

■

Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Important: if the supply cable is damaged, it must be replaced by authorised service or qualified personnel using a special cable of the same type.

■

During normal operation, the condenser and compressor at the back of the appliance heat up considerably. For safety reasons, minimum ventilation must be as shown in the relevant paragraph.

General Safety

■

This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.

■

It is dangerous to alter the specifications or modify this product in any way.

■

Before any cleaning or maintenance work is carried out, be sure to switch off and unplug the appliance.

■

This appliance is heavy. Care should be taken when moving it.

■

Ice follies can cause frost burns if consumed straight from the appliance.

■

Take utmost care when handling your appliance so as not to cause any damages to the cooling unit with consequent possible fluid leakages.

■

The appliance must not be located close to radiators or gas cookers.

■

Avoid prolonged exposure of the appliance to direct sunlight.

■

There must be adequate ventilation round the back of the appliance and any damage to the refrigerant circuit must be avoided.

■

For freezers only (except built-in models): an ideal location is the cellar or basement.

■

Do not use other electrical appliances (such as ice cream makers) inside of refrigerating appliances.

Service / Repair

■

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

■

This appliance should be serviced by an authorised Service Centre, and only genuine spare parts should be used.

■

Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or more serious malfunctioning. Refer to your local Service Centre, and always insist on genuine spare parts.

Environment Protection

■

This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials.The appliance shall not be discarded together with the urban refuse and rubbish. Avoid damaging the cooling unit, especially at the rear near the heat exchanger. Information on your local disposal sites may be obtained from your municipal authorities.

■

The materials used on this appliance marked with the symbol are recyclable.

Disposal of old appliances

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Attention: keep ventilation openings clear of obstruction.

■

If the appliance is transported horizontally, it is possible that the oil contained in the compressor flows in the refrigerant circuit. It is advisable to wait at least two hours before connecting the appliance to allow the oil to flow back in the compressor.

■

There are working parts in this product which heat up. Always ensure that there is adequate ventilation as a failure to do this will result in component failure and possible food loss. See installation instructions.

■

Parts which heat up should not be exposed. Wherever possible the back of the product should be against a wall.

■

If the appliance has been transported horizontally, it is possible that the oil contained in the compressor flows in the refrigerant circuit. It is advisable to wait at least two hours before connecting the appliance to allow the oil to flow back in the compressor.

+ 9 hidden pages