Your new freezer may have other functions compared to your previous one.
Carefully read these instructions to learn how the appliance works and how to care for it. Keep the
booklet. It will come in handy if you later sell the cabinet or give it to somebody else.
These warnings are provided in the interests of your safety. Ensure that you understand them all before
installing or using the appliance. Your safety is of paramount importance. If you are unsure about any of the
meanings or warnings contact the Customer Care Department.
For the User
·The cabinet is intended for keeping foodstuff in a
normal household as explained in this instruction
booklet.
·Do not keep explosive gases or liquids in the
refrigerator or freezer compartment. They may
explode and cause injury and material damage.
·Do not place food products directly against the
air hole on the rear wall.
·Do not keep carbonised drinks or bottles in the
freezer compartment. The glass bottles may
break.
·The cabinet is heavy. The edges and projecting
parts of the cabinet may be sharp. Be careful
when moving the cabinet and always use gloves.
Child Safety
·Pay attention so that small children do not gain
access to the operating controls or the inside of
the cabinet.
GB
instruction
Scrapping old cabinets
The symbol on the product or on its packaging indicates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negativ
consequences for the environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product, please contact your
local ci
y office, yourhousehold waste disposal service o
he shop where you purchasedthe product.
Contents
Safety instructions13.................
Scrapping old cabinets13.......................
Contents13..........................
Description of the Appliance14........
Control Panel14..............................
Before use14.........................
Using the freezer15...................
To start the freezer and set the correct temperature 15
Temperature inside the freezer15................
Switching off15..............................
Alarms and other features15....................
Freezing16..................................
Suitable storage periods17......................
Cabinet interior17............................
Thawing17..................................
Hints and Tips18.....................
Saving energy18.............................
Food Storage18..............................
GB
Protect the environment18......................
Maintenance and Cleaning18..........
Removing the ventilation grille18................
Cleaning18..................................
To change the light bulb19.....................
When the appliance is not in use19...............
Something Not Working19............
Service and Spare Parts20......................
Guarantee Conditions21.......................
Customer Care Department21...................
Technical specificatio n21.............
Installation21........................
Electrical cord21.............................
Unpacking21................................
Remove the transport supports21................
Cleaning22..................................
Installing the cabinet22........................
Door Reversal23.............................
Electrical connection23........................
Electrolux 818 38 32-00/8
13
Description of the Appliance
4
1
1
2
2
2
2
2
3
Control Panel
1.Freezershelf with flap
2.Freezer drawer
3.Ventilationgrille
4.Accumulator
GB
A. Freezer power switch
Switches the freezer on and off.
B. Temperature display
Shows the highest temperature inside the freezer .
C. Temperature adjustment buttons/thermostat
Used to set the temperature.
D. FAST FREEZE button
Used to switch the Fast Freeze feature on and off.
Before use
Position and clean the cabinet as explained i n the
section "Installation".
Before inserting the power plug into the
outlet and switching on the cabinet for
the first time, leave it standing upright
for about 4 hours. Otherwise the
compressor may sustain damage. This
time will allow the oil sufficient time to
return to the compressor.
*
-- 1 8
ACTIONFREEZE
ABCDEFG
E. Yellow indicator lamp
Lights when Fast Freeze is operating.
F. Alarm shut-off button
Used to turn the audible alarm off.
G. Red warning lamp
Flashes when one of the alarms in the cabinet has
been triggered.
GB
14
Electrolux 818 38 32-00/8
Using the freezer
To start the freezer and set the
correct temperature
Switching on:
Switch on the freezer by pressing the power switch.
The alarm sounds if the temperature inside
freezer reaches room temperature. Turn off the
by pressing the switch-off
Setting the temperature
Press the buttons until the desired temperature blinks
on the temperature display. (The temperature can be
set between -15°C and -24°C.)
"+" increases the temperature.
"-" decreases the temperature.
Once set, the temperature display shows the current
temperature inside the freezer .
Allow t he cabinet to run for a period of 24 hours
whenever the temperature setting is changed. This
will allow the temperature to stabilise inside the
cabinet.
It is not necessary to reset the temperature when the
cabinet is switched on after it has been out of use.
The electronics recalls the previously set
temperature.
button.
the
alarm
--18
20
--18
ACTIONFREEZE
*
ACTIONFREEZE
*
ACTIONFREEZE
*
GB
Temperature inside the freezer
To ensure that foodstuff will keep for a long time, be sure that the temperature inside the freezer is -18°C or
below. Please note, however, that the energy consumption increases as the temperature decreases.
The built-in temperature display shows the warmest temperature inside the freezer. If the temperature is
measured using a thermometer, put it between the products since this will reflect the real temperature in the
frozen products. It is normal that the built-in temperature display shows a temperature slightly above that
measured in other ways.
Switching off
Switch off the cabinet by pressing the power switch.
Keep the button pressed for approx. 1 second.
Power to the cabinet is completely
interrupted only when the power plug is
disconnected.
--18
ACTIONFREEZE
*
Alarms and other features
Door open alarm
If the door remains open for more than about 1,5
minute, the red indicator lamp starts flashing and an
audible alarm sounds.
To switch off the alarm:
Press the alarm shut-off button. As long as the door
remains open, the audible alarm will sound anew at
1-minute intervals. The red indicator lamp goes out
when the door is closed.
--18
ACTIONFREEZE
*
15
Electrolux 818 38 32-00/8
Temperature alarm
If the temperature rises above -12°C, the red warning
lamp flashes and an audible alarm sounds. The
temperature display will then start to flash.
To switch off the alarm:
Press the alarm shut-off button to switch off the
audible alarm. The temperature display will stop
flashing.
The red warning lamp goes out when the
temperature inside the freezer again falls below
-11°C.
Find out what caused the alarm. See the chapter
"Something not working".
Temperature memory
The temperature memory shows when an alarm has
been triggered in the cabinet.
The temperature memory operates as follows:
When the temperature inside the freezer again falls
below -11°C the audible alarm stops. The
temperature display and the red warning lamp will
flash to indicate than an alarm was triggered. When
the alarm shut-off button is pressed, the display then
displays the warmest temperature inside the cabinet
during the alarm phase and the display stops
flashing. By referring to the temperature display
indication, it is possible to decide whether or not to
discard the products inside the freezer.
Atabout-12°C:
Most food products can be immediately
re-frozen. Ice cream is especially sensitive to
temperature changes and should be consumed
as soon as possible.
At -9° - -2°C:
Food products should be prepared (cooked)
prior to eating or re-freezing them.
--11
--18
ACTIONFREEZE
*
ACTIONFREEZE
*
However, always check the quality of the food
yourself to determine if it can be frozen or if it must
be discarded.
Freezing
Press the fast freeze button approx. 24 hours prior to
placing the food in the freezer.
You need not press the fast-freeze button when
freezing smaller quantities of food during any
24-hour period.
Fast freeze is automatically switched off apporox 50
hours after the button has been pressed.
Fast freeze can be discontinued by pressing the fast
freeze button once again.
The yellow fast freeze lamp remains lit as long as
the fast freeze button is engaged.
"A" (ACTION FREEZE) is displayed in
temperature display
.
the
ACTIONFREEZE
A
*
16
Electrolux 818 38 32-00/8
Practical advice on freezing
·When freezing products, use the top shelves.
-When freezing large amounts of food/provisions,
the accumulator moves to on top of the food.
-Do not cover the air hole on the rear wall.
·Spread out the products as much as possible to
allow air to circulate between them.
·Do not place food products which are to be
frozen directly against other frozen food.
The heat from the unfrozen food may cause
the frozen food to thaw on the surface.
·Once frozen, re-arrange the products and put
them as close as possible to each other.
The food will then stay cold longer in the
event of a power failure.
·Do not freeze too much food at the same time.
The freezing capacity of the unit is indicated in
the specifications section.
Check that the cabinet is operating and
keeps the set temperature one day after
switching it on for the first time. Only
after then should the freezer be used to
freeze fresh foodstuff.
Suitable storage periods
Food purchased in frozen condition: Follow the
advice on the maximum storage period indicated on
the packaging.
Fresh food frozen at home:
Fatty and salty food should not be kept frozen for
more than three months. Cooked food and low-fat
food may be kept up to about six months. Lean food
and berries can be kept for approximately one year.
Cabinet interior
Freezer drawers
The freezer drawers make that it easy to quickly and
easily find the food package you want. In order to
obtain maximum space, all fittings except the top
door and the lower box can be removed and filled
with groceries up to the indicated loading limit.
Cold accumulator
The cold accumulator will keep the food cold for
longer after a power failure. The cold accumulator
will be most effective when placed on the top shelf.
When freezing large amounts of food/provisions, the
accumulator moves to on top of the food.
Ice cubes
Fill the ice tray to max. 3/4 since water expands as it
freezes. Release the ice cubes by twisting the ice
tray.
If ice cubes are kept for a long time, they will dry
out and the taste is affected. Thus, throw away old
ice cubes and prepare new ones when needed.
Thawing
It is best to thaw foods in refrigerator. Place the
foodstuff on a plate with a raised edge to prevent
liquids from running out. To quickly thaw food,
place it in room temperature or in cold water. When
using a microwave oven to thaw foodstuff, follow
the manufacturer's instructions.
Removable shelves
There are the removable shelves inside the freezer.
Remove the shelf when large food products need to
be frozen.
Electrolux 818 38 32-00/8
17
Hints and Tips
GB
Saving energy
·Pay careful attention to where the cabinet is
placed. See the section "Installation". When
installed correctly, the cabinet will consume less
energy.
·Try to avoid keeping t he door open for long
periods, or opening the door too frequently as
warm air will enter the cabinet, and cause the
compressor to switch on unnecessarily often.
·Ensure there are no obstructions preventing the
door from closing properly.
·Thaw frozen food in the fridge. This will ensure
safer defrosting of foods and reduce the work of
the refrigeration unit
·It is advisable to periodically clean the
refrigeration system at the back of the appliance
with a duster or vacuum cleaner.
·Food which is to be frozen (when cool) should
be placed in the fridge before being transfered to
the freezer .
·Avoid unnecessary frosting in the cabinet by
packing all foodstuffs into airtight packages
before placing them in the freezer.
·Carefully follow the advice on freezing products
in the section "Using the freezer". This will
prevent wasting energy .
·Do not set the temperature too low in the freezer.
A suitable temperature is in the range of -18°C
to -20°C .
·Make sure the door gasket is complete and
always clean.
Food Storage
·To obtain the best results from your appliance,
neither hot foods nor liquids which may
evaporate, should be placed in the larder
compartment.
·Avoid buying frozen food if you can not store it
straight away. The use of an insulated container is
advisable. When you arrive home place the
frozen food in the freezer immediately.
·Ensure that food placed in the freezer is dated and
labelled and used in date order to ensure that food
is consumed at its best.
Remove suspect food from you refrigerator and
clean, refer to cleaning and maintenance.
Protect the environment
·Hand over the cabinet packaging and discarded
fridges and freezers to a recycling station.
Contact your local council or Environmental
Health office for more i nformation.
·Keep foodstuff in re-usable containers. Cut down
on disposable material as much as possible.
·When cleaning the cabinet, use a mild
washing-up detergent.
·F ollow the advice in the section "Saving energy"
·The door gasket and coolant used in this
cabinet will not harm the ozone layer.
·All parts in the packaging can be recycled.
·The cabinet has been designed for easy
dismantling and subsequent recycling.
Maintenance and Cleaning
Removing the ventilation grille
The ventilation grille can be removed, e.g. to wash
the grille.
Make sure the door is open when removing the
ventilation grille. Unsnap the upper edge of the grille
by pulling outward/downward. Then pull the grille
straight out to completely remove it.
Cleaning
Clean the cabinet at regular intervals.
Don't use detergents, abrasive powders,
high perfumed cleaning products, wax
polishes or cleaning products
containing bleach or alcohol when
cleaning the product
Disconnect the appliance from electricity supply.
Internal Cleaning
Clean the inside and accessories with warm water
and bicarbonate of soda (5ml to 0,5 litre water)
Rinse and dry thoroughly.
Regularly check the door seals and wipe clean to
ensure they are clean and free from debris.
18
GB
Electrolux 818 38 32-00/8
External Cleaning
Use water/neutral soap emulsion for cleaning the
surface of stainless steel, anti-finger-print coated.
Absolutely not to use abrasive paste.
Wash the outer cabinet with warm soapy water.
Remove the ventilation grille (see the section
"Removing the ventilation grille") and vacuum-clean
under the cabinet. Once or twice a year dust the
condenser (black grille) and the compressor at the
back of the appliance, with a brush or vacuum
cleaner, as an accumulation of dust will affect the
performance of the appliance and cause excessive
electricity consumption.
Defrosting
Defrosting is not necessary.
Every 24 hours, the evaporator is defrosted
automatically.
To change the light bulb
The light is switched on automatically when the
door is opened. Before replacing the light bulb,
disconnect the power plug from the outlet.
Cut the packaging around the bulb socket.
Keep the packaging on to hold the bulb when setting
it into the socket. Do not touch the bulb with your
bare fingers. Halogen light bulbs are sensitive to
grease from the skin.
Use a clear halogen light bulb.
When moving the cabinet, lift it by
the front edge to avoid scratching the
floor.
G4
UV-blocked
Low pressure20W/12V
When the appliance is not in use
Disconnect the appliance from electricity supply.
Empty all foods and clean the appliance, leaving the
doors ajar to prevent unpleasant smells.
If the cabinet will be kept on, ask somebody to
check it once in a while to prevent the food inside
from spoiling in case of a power failure.
Something Not Working
Before contacting your local Service Force Centre check the following point:
ProblemPossible cause / Remedy
"" is displayed in the temperature
display.
Audible alarm + flashing red warning
lamp. (It is too warm inside the freezer .)
It is too warm inside the freezer.Set a lower temperature.
Please contact your local Electrolux S ervice Force Centre
Switch off the audible alarm by pressing the alarm off button.
The audible alarm could have been triggered by:
The cabinet having been recently switched on and the
temperature still being too high. See the chapter "Switching on
and setting the temperature".
The door may have been open for so long that the `door open'
alarm was triggered.
Make sure that the door is completely closed and that the
insulating strip is complete and clean.
If warm food products have been put inside the freezer, wait for
a couple of hours and then check the temperature again.
Distribute the food products to allow cold air to circulate
around them.
GB
19
Electrolux 818 38 32-00/8
It is too cold inside the freezer.Set a warmer temperature.
Fast Freeze could have been switched on.
The temperature display shows the highest temperature inside
the cabinet. Thus a difference between the temperature
indicated on the display and the (average) temperature
measured in another way is normal.
Too much frost and ice are produced.Make sure that the door is completely closed and that the
insulating strip is complete and clean.
The compressor operates continuously.Set a warmer temperature.
Make sure that the door is completely closed and that the
insulating strip is complete and clean.
The temperature where the cabinet is placed is above normal
room temperature.
The cabinet does not operate at all.
Cooling or interior light does not
operate. No indicator lamps light.
Sound level in cabinet is too high.The refrigerating system will always produce some sounds. A
Power failureDo not unnecessarily open the cabinet, except when the power
The cabinet is not switched on.
Power does not reach the cabinet. (Try connecting another
electrical device to the power outlet.)
The fuse has blown.
The power plug is not properly connected.
pulsing sound is heard when coolant is pumped inside the
cooling pipes. A ticking sound from the thermostat can be
heard when the compressor switches on and off. The sound
level varies depending on the operation of the cabinet.
If you feel the sound level is incorrect:
Make sure the pipes at the back of the cabinet not touch each
other. Carefully bend them if they do.
If the cushion spacers (between the cabinet wall and pipes)
come loose, put them back in place again.
Carefully follow t he instructions in the chapter "Installing the
cabinet".
cut seems to be long, in which case the food products should be
moved to another cabinet that works. If the frozen products are
still hard following the power cut, they may be immediately
refrozen. If the food products have thawed but are still fresh,
they may be used, however they should be prepared before
re-freezing or eating them.
ServiceandSpareParts
In the event of your appliance requiring service, or
if you wish to purchase spare parts please contact
your local Electrolux Service Force Centre by
telephoning:
XXXXXXXXXXX
Your call be routed the Service Force Centre
covering your post code area. The address of your
local Service Force Centre ids detailed in the
accompanying Customer Care Book.
Before calling out an engineer, please ensure you
have read the details under the heading "Something
Not Working"
When you contact the Service Centre you will need
to give the following details.They will be found
inside your appliance.
MOD (modell):.....................................................
See Guarantee C onditions on the Registration Card.
Customer Care Department
For general enquiries concerning your Electrolux
appliance or futher information on Electrolux
products, you are invited to contact our Customer
Care Department by letter or phone as follows:
Customer Care Department
Electrolux
55-77 High Street
Slough
Berkshire
SL1 1DZ
Phone: 08705 950950 *
* calls to this number may be recorded for training
purposes
Technical specification
ModelEUF2300/EUF2300X
Vol um e215 l
Width595 mm
Height1800 mm
Depth623 mm
Energy consumption281 kWh/Y
Energy classA+
Rated power120W
Freezing capacity25 kg/24 hours
Installation
GB
GB
Electrical cord
Do not remove the power cord by pulling on its lead, particulary when the product is being pulled out of
its niche.
·Damage to the cord may cause a short-circuit, fire and/or electric shock.
·In the event of damage to the appliance's main cable, only an authorised service company recommended by
the manufacturer or a similarly qualified person may adjust it in order to avoid shock hazard for the user.
Unpacking
Unpack the cabinet and check that it is in good
condition and free of any transport damage. Notify
the dealer immediately of any damage. Hand the
packaging over for recycling. For more information,
contact your local city office or the dealer.
Do not allow children to play with the
packaging. The plastic film can cause
suffocation.
Remove the transport supports
Remove the transport supports placed along the door
sides.
Some models are fitted with a silencing pad under
the cabinet. Do not remove this pad.
Installation of distance
Assemble the attached distance on the back side of
the panel according to the illustration.
Electrolux 818 38 32-00/8
21
Cleaning
)b)
Wash the inside of the cabinet using lukewarm
water, a mild washing-up detergent and a soft cloth.
Installing the cabinet
When two appliances are placed beside each other,
the distances enclosed in the plastic wrapping should
be glued between the appliances. As shown in the
illustration.
Make sure that the power plug is not squashed or
damaged by back of the product.
·A damaged power plug may overheat and cause a
fire.
Do not place heavy articles or the product itself on
the power cord.
·there is a risk of a short circuit and fire.
If the power plug socket is loose, do not insert the
power plug.
·there is a risk of electric shock or fire.
To obtain the best performance from the cabinet,
ensure :
·the cabinet is placed in a dry, cool place and
is not exposed to direct sunlight.
·the cabinet is not placed close to a source of
heat, e.g. a cooker or dishwasher.
·the cabinet is level. The cabinet should not lean
against any wall. If necessary adjust the
feet using the adjustment spanner supplied.
·there is good air circulation around the cabinet
and that the air channels below and behind
the cabinet are not blocked. The ventilation
space above the cabinet must be at least 4 cm.
The ventilation space can either be
a) directly above the cabinet, or
b) behind and above the top cupboard. In this case,
the space behind the cupboard must be at least
50 mm deep.
Cabinet is placed at a location whose ambient
temperature corresponds to the climate
classification*, for which the appliance is designed.
* See on the rating plate on the inside of the
appliance.
The following table shows which ambient
temperature is correct for each climate classification.
Climate
classification
SN
N
ST
T
for an ambient temperature of
+10°C to +32°C
+16°C to +32°C
+18°C to +38°C
+18°C to +43°C
a
50mm
If the cabinet is placed in a corner and the side with
the hinges facing the wall, the distance between the
wall and the cabinet must be at least 10 mm to allow
the door to open enough so that the baskets can be
removed.
The power plug must be accessible after installation
of the cabinet.
Electrolux 818 38 32-00/8
22
Door Reversal
1. Close the cabinet and remove the plug from the
electrical socket.
2. Remove the ventilation grille. There is a part on
the grille that can be removed. Remove and
reposition it on the other side.
3. Put the cabinet on a wooden board when it is laid
down. Later, when raising the cabinet, it will be
easier to grip under the cabinet thanks to the board.
1
2
3
4. On the upper part of the cabinet. Put the hinge pin
on the other side.
5. On the lower part of the cabinet.
a. Unscrew the hinge.
b. Remove the door-closing fittings from the hinge
and put the hinge pin on the other side. Then attach
the supplied door-closing fitting.
6. a. Remove the door-closing fitting from the
bottom of the door.
b. Then secure the supplied door-closing fitting on
the other side.
c. Secure the lower hinge.
Remove any play in the door by adjusting the height
of the lower hinge with the supplied spanner. Secure
with the lock-nut.
7. Raise the cabinet and replace the ventilation grille.
8. To transfer the handle.
Unscrew the screws. Fit the handle onto the opposite
side by turning it one half circle. Press the supplied
plastic plugs into the holes to which the handle was
previously fitted.
4
5b
5a
6
a
b
c
8
9. Put the cabinet in position. Check that the
appliance is level. See the section "Positioning the
cabinet".
Electrical connection
Connect the cabinet to a grounded electrical outlet.
Voltage: 230 V.
Fuse: 10 A.
Refer to the rating plate on the left inside the
cabinet.