AEG-Electrolux ESI63020X User Manual

user manual
dishwasher
ESI 63020
We were thinking of you
when we made this product
welcome to the world of Electrolux electrolux 3
Welcome to the world of Electrolux
Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable. You find some examples on the cover in this manual. Please take a few minutes to study this manual so that you can take advantage of the benefits of your new machine. We promise that it will provide a superior User Experience delivering Ease-of-Mind. Good luck!
117991 56/0
4 electrolux contents
Contents
Safety information 5 Product description 7 Control panel 8 First use 11 Daily use 15 Washing programmes 26 Care and cleaning 27 Something not working 29 Technical data 32 Hints for test institutes 34 Installation 35 Environment concerns 39 Guarantee/Customer Service 40
The following symbols are used in this manual:
Important information concerning your personal safety and information on how to avoid damaging the appliance.
General information and tips
Environmental information
Safety information
In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety.
Correct use
This dishwasher is only intended
for washing household utensils suitable for machine washing.
Do not put any solvents in the
dishwasher. This could cause an explosion.
Knives and other items with sharp
points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket.
Only use products (detergent, salt
and rinse aid) suitable for dishwashers.
Avoid opening the door whilst the
appliance is in operation, hot steam may escape.
Do not take any dishes out of the
dishwasher before the end of the dishwashing cycle.
safety information electrolux 5
After use, isolate the appliance
from the power supply and turn off the water supply.
This product should be serviced
only by an authorised service engineer, and only genuine spare parts should be used.
Under no circumstances should
you attempt to repair the machine yourself. Repairs carried out by inexperienced persons will cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.
General safety
Dishwasher detergents can cause
chemical burns to eyes, mouth and throat. Could endanger life! Comply with the safety instructions of the dishwasher detergent manufacturer.
The water in your dishwasher is
not for drinking. Detergent residues may still be present in your machine.
Ensure that the door of the
dishwasher is always closed when it is not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves.
Do not sit or stand on the open
door.
Child safety
This appliance is designed to be
operated by adults. Don’t allow children to use the dishwasher unsupervised.
6 electrolux safety information
Keep all packaging well away from
children. There is risk of suffocation.
Keep all detergents in a safe place
out of children’s reach.
Keep children well away from the
dishwasher when the door is open.
Installation
Check your dishwasher for any
transport damage. Never connect a damaged machine. If your dishwasher is damaged contact your supplier.
All packaging must be removed
before use.
Any electrical and plumbing work
required to install this appliance must be carried out by a qualified and competent person.
For safety reasons it is dangerous
to alter the specifications or attempt to modify this product in any way.
Never use the dishwasher if the
electrical supply cable and water hoses are damaged; or if the control panel, work top or plinth area are damaged such that the inside of the appliance is freely accessible. Contact your local Service Force centre, in order to avoid hazard.
All sides of the dishwasher must
never be drilled to prevent damage to hydraulic and electric components.
For electrical and water connection carefully follow the instructions given in specific paragraphs.
Product description
product description electrolux 7
1
Upper basket
2
Water hardness dial
3
Salt container Detergent dispenser
4
Rinse aid dispenser
5
Rating plate
6
Filters
7
Lower spray arm
8
Upper spray arm
9
8 electrolux control panel
Control panel
1
Programme marker
2
On/Off indicator light
Programme knob
3
Start/cancel button
4
Delay start button
5
6
Indicator lights
Indicator lights
control panel electrolux 9
Wash
Dry
End of programme
Salt
Rinse aid
Illuminates when the washing and rinsing phases are running.
Illuminates when the drying phase is running.
Illuminates when a washing programme has ended. It also has added functions of visual signalling as:
- the setting of the water softener,
- intervention of an alarm due to the malfunction of the machine.
Illuminates when the special salt has run out.
Illuminates when the rinse aid has run out.
The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and/or rinse aid is necessary.
The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.
10 electrolux control panel
Programme knob and On/Off indicator light
The selection of a washing
programme occurs by turning the programme knob clockwise or anticlockwise, until the programme marker, placed on the knob, corresponds with the desired washing programme indicated on the control panel.
The On/Off indicator light illuminates (position ON)
To switch off the appliance turn the
programme knob until the programme marker corresponds with the On/Off indicator light.
The On/Off indicator light turns off (position OFF).
With the programme knob it is also possible to set the level of the water softener.
First use
first use electrolux 11
Before using your dishwasher for the first time:
Ensure that the electrical and
water connections comply with the installation instructions
Remove all packaging from inside
the appliance
Set the water softener
Pour 1 litre of water inside the salt
container and then fill with dishwasher salt
Fill the rinse aid dispenser
Set the water softener
The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.
The higher the content of these minerals and salts, the harder your water is.
Water hardness is measured in equivalent scales, German degrees (°dH), French degrees (°TH) and mmol/l (millimol per litre - international unit for the hardness of water).
The softener should be adjusted
When using combi detergents tablets («3 in 1», «4 in 1», «5 in 1», etc...) follow the instructions given in "Use of detergent".
Water hardness
according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.
Adjusting the water
hardness setting
°dH °TH mmol/l manually electronically
Use of
salt
51 - 70 91 - 125 9.0 - 12.5 2 level 10 yes 43 - 50 76 - 90 7.6 - 8.9 2 level 9 yes
37 - 42 65 - 75 6.5 - 7.5 2 level 8 yes 29 - 36 51 - 64 5.1 - 6.4 2 level 7 yes
23 - 28 40 - 50 4.0 - 5.0 2 level 6 yes 19 - 22 33 - 39 3.3 - 3.9 2 level 5 yes
15 - 18 26 - 32 2.6 - 3.2 1 level 4 yes 11 - 14 19 - 25 1.9 - 2.5 1 level 3 yes
4 - 10 7 - 18 0.7 - 1.8 1 level 2 yes
< 4 < 7 < 0.7 1 level 1 no
no salt is necessary
*
*
12 electrolux first use
The water softener must be set in both ways: manually, using the water hardness dial and electronically, using the programme knob and the
start/cancel button. Setting manually
The dishwasher is factory set at position 2.
1. Open the dishwasher door.
2. Remove the lower basket from the dishwasher.
3. Turn the water hardness dial to position 1 or 2 (see table).
4. Replace the lower basket.
2. Release the start/cancel button, the On/Off and start/cancel indicator lights start to flash indicating that you have activated the water softener setting function.
3. At the same time, the end of programme indicator light starts to flash. The current level is indicated by the number of flashes of the indicator light end of programme and a pause of about 3 seconds.
Examples:
5 flashes, pause, 5 flashes, pause, etc... = level 5
6 flashes, pause, 6 flashes, pause, etc... = level 6
Setting electronically The dishwasher is factory set at
level 5.
1. The dishwasher must be switched off. Keep the start/cancel button pressed and turn the programme knob clockwise until the programme marker corresponds with the first washing programme.
4. To change the level, press the start/cancel button. Each time the button is pressed the level changes.
Examples:
if the current level is 5, by pressing start/cancel button once, level 6 is selected.
if the current level is 10, by pressing start/cancel button once, level 1 is selected.
5. To memorise the operation, switch off the dishwasher by returning the programme knob to the Off position.
first use electrolux 13
Filling with dishwasher salt
Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion.
To fill:
1. Open the door, remove the lower basket and unscrew the cap of the salt container by turning it anticlockwise.
4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket.
5. Replace the cap tightly turning it clockwise until it stops with a click.
Do not worry if water overflows from the unit when filling with salt, this is quite normal.
2. Pour 1 litre of water inside the container (this is necessary only
before filling with salt for the first time).
3. Using the funnel provided, pour in the salt until the container is full.
14 electrolux first use
Filling with rinse aid
Rinse aid ensures thorough rinsing, and spot and streak free drying.
Rinse aid is automatically added during the last rinse.
1. Open the container by pressing the release button (A).
2. Add the rinse aid in the container. The maximum level for filling is indicated by "max".
According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position 6 maximum dosage).
The dose is factory set in position 4. Increase the dose if there are drops of
water or lime spots on the dishes after washing.
Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades.
The dispenser holds about 110 ml of rinse aid, which is sufficient for between 16 and 40 dishwashing cycles, depending upon the dosage setting.
3. Ensure that the lid is closed after every refill.
Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.
Only use branded rinse aid for dishwashers.
Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.
Loading...
+ 30 hidden pages