It is very important that you keep this instruction booklet together with the appliance for
future reference. If the appliance should be sold or transferred to others, make sure that the
instruction booklet is included with it so that the new owner can become acquainted with its
operation and the information concerning it.
If this appliance - fitted with a magnetic lock - is to replace one fitted with a spring lock, we
recommend that you make the spring lock unserviceable before setting the old appliance
aside. The purpose of this operation is to prevent children from becoming accidentally
locked inside the refrigerator, thus endangering their lives. This information is provided for
your safety and that of others. Therefore, please read this information carefully before installing and using the appliance.
Safety
•This appliance is designed to be used by
adults. See to it that children neither touch it
nor use it as if it were a toy.
•Always unplug the appliance before cleaning
it inside and outside, and before replacing the
lamp (for those models that are equipped
with one).
•Do not eat certain products such as ice lollies
as soon as they are taken out of the appliance since the very low temperature they are
stored at maycause burns.
•This appliance is heavy. Be careful whenever
it has to be moved.
•Pay very close attention when moving the
appliance so as to not damage elements
of the cooling circuit and to prevent the
risk of leaks of coolant.
•The appliance must not be placed near
radiators or gas cookers.
•Avoid prolonged exposure of the appliance to rays of sunlight.
•Ensure sufficient air circulation behind
the appliance and prevent any damage
from being done to the cooling circuit.
•Only for freezers (except for the case of
built-in models): one ideal place is the cellar.
•Do not put electric devices inside the
appliance (an ice-cream maker, for example).
•This appliance contains hydrocarbons in the
cooling circuit; maintenance and recharging
must be performed by authorised personnel
only.
•In the case of a failure, do not attempt to
repair the appliance on your own. Repairs
made by unqualified personnel may cause
damage. Contact the closest service centre
and demand original spare parts only.
Installation
•After having installed the appliance, make
sure it is not sitting on the power cable.
Important: if the power cable becomes
damaged, replace it with a special cable or
with an assembly available from the manufacturer or the after-sales technical service
centre.
•The appliance heats up considerably on the
condenser and compressor levels. Make sure
that air circulates freely around the appliance.
Insufficient ventilation may result in malfunctioning and damage to the appliance. Follow
the installation instructions.
•The air inside the compressor could run into
the cooling circuit due to the transport system. Wait at least 2 hours before connecting
the appliance to the electric network in order
to allow the oil to flow back into the compressor.
Service / Repairs
•Any modification to the house's electric system that proves necessary for installing the
appliance is to be performed by qualified personnel only.
•It is dangerous to modify or try to modify the
characteristics of this appliance.
2
Use
•Household refrigerators and/or freezers are
to be used only for storing and/or freezing
foods and beverages.
•Your appliance will operate well if the ambient
temperature of the room is between +18°C
and +43°C (Class T); +18°C and +38°C
(Class ST); +16°C and +32°C (Class N);
+10°C and +32°C (Class SN); the class is
shown on the identification plate.
CAUTION: It is mandatory you follow these
instructions when the ambient temperature is
outside the limits indicated for the class this product belongs to: when the ambient temperature
drops below the minimum value, the storage
temperature of the freezer compartment cannot
be guaranteed; it is therefore recommended that
the products it contains be eaten as soon as
possible.
•Thawed products must never be frozen
again.
•Follow the manufacturer's instructions concerning the preservation and/or freezing of
foods.
•All refrigerators and freezers have surfaces
that become covered with frost.Depending
on the model, the frost can be eliminated
automatically(automaticdefrosting)or
manually.
•Never try to remove the frost with a metallic
object. There is the risk that the evaporator
can be irreparably damaged. This is why only
a plastic spatula should be used.
•Similarly, never detach the ice cube trays
using a knife or any other sharp object.
•Do not put bottles or cans of carbonated beverages in the freezer or in the low temperature compartment as they could explode.
Environmental protection
This appliance does not contain coolant gas
harmful for the ozone layer in its cooling circuit
and insulating material. The appliance is not to
be discarded together with household waste and
scrap iron. You must avoid damaging the cooling
circuit, particularly on the back of the appliance
close to the heat exchanger. Ask your municipal
office where the recycling centres are located.
The materials used in this appliance and identified by thesymbol can be recycled.
Discarding old appliances
The symbolon the product or packing
means that this product cannot be handled as
household waste.It must be taken to special
collection centres that deal with recycling electrical and electronic material. By ensuring that this
product is eliminated properly, you help prevent
negative consequences for the environment and
human health that would otherwise be the result
of improper handling of the wastes of this product.
To get more detailed information about recycling
this product, contact the municipal office of your
area, the city refuse service or the store where
the product was purchased.
INFORMATION ABOUT DISPOSAL OF THE PACKING MATERIALS
This information regards all the material and
accessories used for packing our household
appliances, except those in recyclable wood
which can be salvaged.
It is advisable to:
•Dispose of the paper, cardboard and corrugated cardboard packing at the collection centres dedicated to this type of material.
•Put the pieces of plastic in the relevant containers. If this type of container is still unavailable where you live, you can dispose of
these materials together with household
waste.
As for the packing made of recyclable plastics
such as, for example:
The examples bear the following symbols:
PE for polyethylene** 02 = ^ PE-HD; 04 = ^ PELD
PP for polypropylene
PS for polystyrene
PLASTIC PARTS
In order to simplify elimination and/or recycling
of the materials, most of the appliance's components are marked to make them easier to identify.
Once the appliance is installed, clean it thoroughly with warm water and soap in order to remove the characteristic “new” odour.
Do not use abrasive products, abrasive powders or steel wool.
Control panel
A - ON/OFF button of the appliance
B - Temperature and function indicator
C - Function
D - Refrigerator thermostat
4
DISPLAY
1. Positive or negative temperature indicator
2. Temperature indicator
3. If on, it indicates that the shopping function is
active.
Operation
If the LCD display does not turn on after having
plugged the appliance in, press the appliance
ON button (A).
As soon as the appliance has turned on, the following information will be displayed on the control panel:
•The symbol (1) will be positive, indicating that
the temperature is positive.
By setting the refrigerator grip handle (D) on the
intermediate position, the appliance will be
ready to provide the following temperature:
Activating the functions
The following functions will be activated clockwise every time button C is pressed:
Symbol 3: shopping function.
No symbol: normal operation
Switching off the appliance
To switch off the appliance, press button (A) for
longer than 1 second. A signal indicates the
countdown of the temperature: 3-2-1.
When the appliance switches off, the display (B)
switches off in turn.
about +5°C inside the refrigerator.
Using the refrigerator compartment
Temperature adjustment
The temperature is automatically adjusted and
can be increased (less cold) or decreased (colder) with of the grip handle (D) rotation. In any
case, the exact position is to be found considering that the internal temperature depends on the
following factors:
•ambient temperature;
•how frequent the doors are opened;
•amount of preserved foods;
•position of the appliance.
It is advisable to set the grip handle in the intermediate position in order to get an internal temperature of about +5°C
Important
If the thermostat is set on the maximum cold
position, it is possible that the compressor works
continuously when the ambient temperature is
high and the appliance is full. In this case the
risk of too much frost forming on the rear internal wall of the appliance arises. To prevent this
problem, set the thermostat on a lower position
so automatic defrosting can be performed with
consequent energy savings.
5
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.