AEG-Electrolux ENB3900M, ENB3400M, ENB3460, ENB3760X, ER3562BNS User Manual
...
19
Index
Safety Instructions pág. 20
Installation pág. 21 - 22
Changing the opening
directions of the doors pág. 23
Regulation and Control pág. 24 - 25
How to use your
Fridge-Freezer pág. 26 - 27
Maintenance of your
Fridge-Freezer pág. 28
Something not working pág. 29 - 30
Normal noises when
functioning pág. 31
Guarantee, Service
and Spare Parts pág. 32
Technical Features pág. 33
20
m Frozen food must not be re-frozen once it has
been thawed out.
m Manufacturer’s storage recommendations should
be strictly complied with.
m Ice lollies can cause frost burns if consumed
straight away from the freezer.
m Do not use electrical appliances inside the frid-
ge/freezer.
m Do not place carbonate or fizzy drinks in the
freezer as these may explode.
m Whenever you discard and old freezer make
sure to:
m Take off the doors in order to prevent chil-
dren being trapped inside.
Have the gas R600a from the cooling system
removed by an authorised person before
making it into scrap metal.
The symbol on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it shall
be handed over to the applicable collection
point for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product,
please contact your local city office, your
household waste disposal service or the shop
where you purchased the product.
m
Safety instructions
Warnings for your safety. Carefully read
these instructions before installing and
using the machine
m This appliance is designed to be operated by adults
only. Children should not be allowed to tamper with
the controls or play with the product.
m Make sure that the power plug is not squashed or
damaged by the back of the fridge/freezer. Do not
place heavy articles or the fridge/freezer itself on the
power cord. Do not remove the power cord by
pulling on its lead, particularly when the fridge/freezer is being pulled out of its niche. If the power
plug socket is loose, do not insert the power plug. If
the power cord is damaged, it must be replaced by a
certified service agent or qualified service personnel. Damage to the cord may cause a shortcircuit,
fire and/or electric shock.
m This appliance is heavy. Care should be taken when
moving it.
m Repairs carried out by inexperienced persons may
cause injuries or serious malfunctioning. Refer to
the TECHNICAL OFICIAL SERVICE.
m The appliance should be left for at least 4 hours
after installation before it is turned on in order to
allow the refrigerant to settle.
m This product must only be serviced by an authorized
Technical Oficial Service, and only genuine SPARE
PARTS should be used.
m Before cleaning or reparing the appliance, make
sure it is unplugged.
m It is dangerous to try and alter the specifications or
modify this product in any way.
m These domestic appliances are designed to be used
specifically for the storage and conservation of
food.
Installation
Positioning
• Place the refrigerator away from direct sunlight and
heat sources.
• Take off at least 50 mm. free over the appliance.
• Never put something on the ventilator of the appliance.
• Make sure the refrigerator is accurately levelled
turning the adjustable feet on the front, in order to
avoid vibrations and noises and to make sure that
the doors shut properly.
• In the documentation bag you will find two spacers
that must be mounted as shown in the figure in the
back of your appliance.
Please loosen the screw under its head and then
unloosen again.
• The appliance should not be located in places with
maximum temperatures more than:
+ 32°C for N/SN Class (classification on rating
plate).
+ 43°C for T/ST Class (classification on rating
plate).
If the temperatures are higher than those mentioned
above, the functioning and the safety of the appliance could be affected.
Cleaning the interior
• Do not use alcohol or any cleaning produts containing alcohol because they could damage the plastic
parts of the appliance.
• Before using the appliance for the first time, wash
the interior with luke warm water and a neutral
soap. This will help to remove the typical smell of a
new fridge/freezer. Afterwards dry thoroughly.
• Do not use detergents or abrasive powders as these
will damage the finish.
• Remove security elements used for transportation.
Electrical connection
mBefore plugging the appliance into a socket make
sure that the voltage and frequency shown on the
rating plate correspond to your home supply.
It is essential that the appliance should be properly
earthed.
mFor this purpose the supply cable plug incorporates
a special earth contact. If the sockets of your domestic wiring system are not earthed, have the appliance connected to a separate earth wire in accordance
with existing safety regulations.
rating
plate
D594
22
Installation
Fig. 4
door alarm
temperature alarm
fast freeze
on/off
temperature
control fridge
temperature
control freezer
Starting - up
• Plug the appliance into the wall socket.
• Within 20 seconds the electronics carry out a system
test and switch the appliance on. The ON/OFF button lights up in green, the interior lighting comes on
and the appliance starts working.
Starting up when the appliance is switched off:
Press and hold down the ON/OFF button for three
seconds. The ON/OFF button lights up in green, the
interior lighting comes on and the appliance starts
working.
• The temperature alarm (a beeping noise) could go
on during the start up phase. If this happens push the
temperature alarm button. (See section on the temperature control for more details).
23
Changing the opening direction
of the doors
Fig. 5
Fig. 6
If you wish to change the opening side of the doors
proceed as follows:
1... Open the freezer door. All the appliances have a
ventilation socle at the bottom. Remove it pushing
strongly on the central and upper part. The upper
supports will be loosed takes the piece out. Then,
take the hinge cover off the opposite side of the
ventilation cover and place it as required. (see fig.
5).
2... Removing the central hinge:
– Open both doors.
– Remove the external pin and then close the freezer door.
– Remove the other pin and close the fridge door.
– Taking care the doors do not fall, pull them off till
bolts are loose.
– Put the doors carefully on the floor.
3... Chage the bolts of the upper and lower hinges to
the opposite side. Change also the plastic covers of
the central partition.
4... Change the door self-closing system, putting the
freezer door’s on the fridge door and viceversa.
5... Fit the freezer door into the lower hinge bolt and
put the central hinge into the door.
6... Fit the fridge door into the upper hinge bolt. Pulling
both doors outwards, fit the central hinge bolt too.
Place the doors.
7... Open the fridge door and screw the central hinge
pin. Then, open the freezer door and screw the
other pin.
8... Assemble socle keep the door open, close it up to
the metallic part.
Fit the two lower flaps of the plastic piece into the
metallic one, press down wards the two upper
hooks (without stopping pressing the socle).
Push it to wards the metallic one till they fit perfectly.
9...Dismantle the vertical handles and assemble
them in the opposite side. Cover the holes with
the plastic lids that were situated where the handles
are presently.
Once finished make sure that all joints close perfectly well all around the door and check that the
internal light turns off when the fridge door closes.
(see Fig. 6)
Loading...