Please read these user instructions carefully and
keep them to refer to later.
Please pass the user instructions on to any future
owner of the appliance.
The following symbols are used in the
text:
1 Safety instructions
Warning! Notes that concern your personal
safety.
Important! Notes that show how to avoid
damage to the appliance.
Please comply with these instructions. If you
do not, any damage resulting is not covered
by the warranty.
5 This appliance conforms with the following EU
Directives:
– 73/23/EEC dated 19.02.1973 Low Voltage Direc-
tive
– 89/336/EEC dated 03.05.1989 EMC Directive in-
clusive of Amending Directive 92/31/EEC
– 93/68/EEC dated 22.07.1993 CE Marking Directive
Correct use
• This appliance should be used only for normal domestic cooking and frying of food.
• The appliance must not be used as a work surface
or as a storage surface.
• Additions or modifications to the appliance are not
permitted.
• Do not place or store flammable liquids, highly inflammable materials or fusible objects (e.g. plastic
film, plastic, aluminium) on or near the appliance.
Child safety
• Small children must be kept away from the appliance.
• Only let bigger children work on the appliance under supervision.
• To avoid small children and pets unintentionally
switching the appliance on, we recommend activation of the child safety device.
General safety
• The appliance may only be installed and connected by trained, registered service engineers, or
competent persons.
• Built-in appliances may only be used after they
have been built in to suitable built-in units and
work surfaces that meet standards.
• In the event of faults with the appliance or damage
to the glass ceramic (cracks, scratches or splits),
the appliance must be switched off and disconnected from the electrical supply to prevent the
possibility of an electric shock.
• Repairs to the appliance must only be carried out
by trained registered service engineers.
Safety during use
• Overheated fat and oil can ignite quickly. When
cooking with fat or oil (e.g. frying chips) do not
leave the appliance unattended.
• There is the risk of burns from the appliance if used
carelessly.
• Remove stickers and film from the glass ceramic.
• Cables from electrical appliances must not touch
the hot surface of the appliance or hot cookware.
• Switch the cooking zones off after each use.
Safety when cleaning
• For cleaning, the appliance must be switched off
and cooled down.
• For safety reasons, the cleaning of the appliance
with steam jet or high-pressure cleaning equipment is not permitted.
How to avoid damage to the appliance
• The ceramic glass can be damaged by objects falling onto it.
• The edge of the ceramic glass can be damaged by
being knocked by the cookware.
• Cookware made of cast iron, cast aluminium or
with damaged bottoms can scratch the ceramic
glass if pushed across the surface.
• Objects that melt and things that boil over can
burn onto the ceramic glass and should be removed straightaway.
• To avoid damaging cookware and glass ceramics,
do not allow saucepans or frying pans to boil dry.
• Do not use the cooking zones with empty cookware or without cookware.
4
Description of the Appliance
Cooking surface layout
Single cooking zone
1200W
Triple ring cooking zone
800/1600/2300W
Multi-purpose zone
1500/2400W
Control panelSingle cooking zone
1200W
Control panel layout
Lock
with pilot light
Outside/middle ring
On/Off
On/Off
with power indicator
Display
Cooking zone indicators
Timer function
Timer display
Timer
Triple ring pilot light
Heat setting selection
Multi-purpose
zone pilot light
Outside ring
On/Off
5
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic
signals.
Touch the sensor fields from above, without covering
other sensor fields.
Sensor fieldFunction
On / OffSwitches appliance on and off
Increase settingsIncreasing heat setting/ time
Decrease settingsDecreasing heat setting/ time
TimerTimer selection
LockLocking/unlocking the control panel
Triple zone touch controlSwitches outside zones
on and off
Multi-purpose zoneTo switch the outside ring on and off
Displays
Display Description
¾ Cooking zone is switched off
u Keep warm settingKeep warm setting is set
¿ - ÇHeat settingsHeat setting is set
a Automatic warm up functionAutomatic warm-up function is activated
e FaultMalfunction has occurred
h Residual heatCooking zone is still hot
l Child safety deviceLock/child safety device is set.
_ Safety cut-outSafety cut-out has been activated
Residual heat indicator
1 Warning! Risk of burns from residual heat. Af-
ter being switched off, the cooking zones need
some time to cool down. Look at the residual
heat indicator
h.
3 Residual heat can be used for melting and
keeping food warm.
6
Operating the appliance
Switching the appliance on
and off
Control panelDisplayPilot light
Switch onTouch for 2 seconds
Switch offTouch for 1 second
¾ / hlights up
h / nonegoes out
3 After switching on, within approx. 10 seconds
a heat setting or a function must be set, otherwise the appliance automatically switches itself off.
Selecting the heat setting
Control panel Indicator
To increaseTouch
To decreaseTouch Ç to ¾
To switch offTouch and at the same time¾
u to Ç
3 The keep warm setting u lies between ¾ and
¿. It is used to keep food warm.
To switch the outside ring
on and off
By switching the outside rings on or off, the effective
heating surface can be matched to the size of the
cookware.
3 Before an outside ring can be switched on, the
inside ring must be switched on.
Triple cooking zoneSensor panelPower indicator
To switch on middle ringTouch
To switch on outside ringTouch
To switch off outside ringTouch
To switch off middle ringTouch
Multi-purpose zoneSensor panelPower indicator
To switch on outside ringTouch
To switch off outside ringTouch for 1-2 seconds.goes out
for 1-2 seconds.One power indicator is lit.for 1-2 seconds.Two power indicators are lit.for 1-2 seconds.Second power indicator goes out.for 1-2 seconds.First power indicator goes out.
for 1-2 seconds.is lit
7
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off”
sensor field, can be locked at any time in order to
prevent the settings being changed e.g. by wiping
over the panel with a cloth.
Control panelDisplay
Switch onTouch
Switch offTouch previously set heat setting
l (for 5 seconds)
3 When you switch the appliance off, the locking
function is automatically switched off.
Using the automatic warm-up function
All cooking zones are equpped with an automatic
warm up function When setting a heat setting using
, when starting from
es to full power for a certain amount of time and then
automatically switches back to the heat setting set.
Switch on
(only when starting at
Switch offTouch
Not usedTouch Ç to uÇ to u
¾, the cooking zone switch-
Control panelpossible heat set-
Touch
¾)
Display
tings
¿ to Æa (after 5 seconds)
Æ to¿ / uÆ to u
3 If during the automatic warm up a a higher
heat setting is selected, e.g. from
automatic warm up is adjusted.
Á to Ã, the
3 If there is still residual heat on the cooking
zone (display
not performed.
The length of time that the automatic warm up function operates depends on the heat setting selected.
Heat settingLength of the automatic warm up [min:sec]
h), the automatic warm up is
v0:30
11:00
21:40
34:50
46:30
510:10
62:00
73:30
84:30
9---
8
Using the child safety device
The child safety device prevents unintentional use of
the appliance.
Setting the child safety device
Step Control panel Display/Signal
1. Switch on the appliance
(Do not set a heat setting)
2.Touch until the signal soundsAcoustic signal
3.Touch
Appliance switches off. The child safety device is set.
¾
l
Overriding the child safety device
The child safety device can be released in this way
for a single cooking session; it remains activated afterwards.
StepControl panelDisplay/Signal
1. Switch on the appliance
2.Touch and at the same time
Until the appliance is next switched off, it can used as normal.
l
¾ / acoustic signal
3 After overriding the child safety device, a heat
setting or a function must be set within
approx. 10 seconds, otherwise the appliance
automatically switches itself off.
Releasing the child safety device
Step Control panel Display/Signal
1.
2.Touch until the signal soundsAcoustic signal
3.Touch
Appliance switches off. The child safety device is released.
Switch on the appliancel
9
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.