Aeg-electrolux ZCX6203, DINGO ZCX6202 PORSZI User Manual
EN Operating Instructions
Thank you for having chosen an Electrolux CycloneXL vacuum cleaner. These Operating Instructions cover all CycloneXL models. This means
that with your specic model, some accessories/
features may not be included. In order to ensure
the best results, always use original Electrolux
accessories. They have been designed especially
for your vacuum cleaner.
2 3
1 2
3 4
5 6
Accessories
1* Telescopic tube
2* Extension tubes
3 Hose handle + hose
4 Combination oor
nozzle
5 Crevice nozzle
6 Upholstery nozzle
7 Accessories clip
8* Turbo nozzle
9* Parquet nozzle
10* Feather duster
Safety precautions
CycloneXL should only be used by adults and only for normal vacuuming in a domestic environment. The vacuum
cleaner features double insulation and does not need to be earthed. Disconnect the plug from the mains before
cleaning or maintenance of the vacuum cleaner. Be sure to keep the vacuum cleaner in a dry place. All servicing
and repairs must be carried out by an authorised Electrolux service centre.
Never vacuum:
• In wet areas.
• Close to ammable gases etc.
• When housing shows visible signs of damage.
Never vacuum:
• Sharp objects, uids.
• Hot or cold cinders, lit cigarette butts, etc.
• Fine dust, for example from plaster, concrete, our, hot or cold ashes.
The above may cause serious damage to the motor – damage which is not covered by the warranty.
Electrical cable precautions:
Regularly check that the cable is not damaged. Never use the vacuum cleaner if the cable is damaged. Damage to
the machine’s cable is not covered by the warranty.
Before starting
11 Open the front cover on the machine and check that the motor lter and the dust container lter are in
place. (See also Cleaning/replacing the lters.)
12* Open the back lid on the machine and check that the exhaust lter is in place.
13 Insert the hose until the catches click to engage (press the catches to release the hose).
14 Attach the extension tubes* or telescopic tube* to the hose handle and nozzle by pushing and twisting
together. (Twist and pull apart to dismantle.)
15 Extend the electric cable and connect it to the mains. The vacuum cleaner is tted with a cable winder. Once
the electric cable has been extended, it stays in that position.
16 To rewind the cable, press the cord rewinder pedal. The cable will then rewind.
17a Start the vacuum cleaner by sliding the power control in the direction of the “Max” position. Increase suction
power by sliding the control further up to “Max” position. Stop the vacuum cleaner by sliding in the opposite
direction to “O” position.
In order to achieve an optimal cyclone effect in the cleaner, the power regulation should always be in the “Max” position.
17b* Suction power can also be adjusted by using the suction control on the hose handle.
18 Ideal parking position for pausing (18a) and storing (18b).
11
13
12
14
15
7 8
9 10
* Certain models only.
* Certain models only.
4 5
16
17a
18a 18b
17b
Loading...