AEG-Electrolux 503 User Manual
Specifications and Main Features
- Dimensions: Height 85 cm, Width 60 cm, Depth 52 cm.
- Operating Voltage: 220-230 V / 50 Hz.
- Power Rating: 2250 W.
- Water Inlet – Minimum Pressure: 5 N/cm².
- Water Inlet – Maximum Pressure: 80 N/cm².
- Among Other Things, Centering Device is Recommended:
- For Cotton & Linen: 5 kgs.
- For Synthetic & Delicate Fabrics: 2 kgs.
- For Wool: 1kg.
- Spin Speed: 500 revolutions/minute.
- Compliance: The appliance does not contain any appliance which was not manufactured without a certified ring under E.E.C. Directive No. 87/308 of 2/6/87 relative to the suppression of radio interference.
Frequently Asked Questions
- Q: The washing machine does not start. What should I check?
A: Check if the door is closed. Please define if the machine is plugged-in and the fuse is not blown on the mains. Check the programmed switch if it is properly set.
- Q: What if the machine does not fill with water?
A: Determine if the tap is turned on or if there are any blocks that prevent water from being drawn into the machine. If this is not the case, then check if the door is closed properly.
- Q: The machine is draining while filling. What does this mean?
A: It suggests that the outlet end of the drain hose is too low situated.
- Q: I seem to be having an issue with my machine as the spin and drain function are not working. What should be my next step?
A: Confirm whether or not the drain filter is clogged and the drain hose is improperly assembled.
- Q: There is a considerable amount of water on my floor and I would like to know the reasons for it?
A: Too much detergent or non suitable detergent can be the cause of this. Check and limit the excess used to troubleshoot or confirm whether there is a leak in the hoses.
- Q: One problem I have is that my machine seems to vibrate a lot and does give off noisey sounds. Why is that?
A: It should be self explanatory but please make sure all bolts that aid transportation and any packing materials are eliminated this includes proper placement of all feet of the machine along with secured lock nuts.
- Q: I’m looking to repair my machine but I’m not sure who to reach out to. Any recommendations?
A: It is suggested that you reach out to an authorized service center as those are the professionals that will be able to help you with your repairs and give you original spare parts.
User Manual
Loading...