AEG L7WEG851R User Manual

L7WEG851R

USER MANUAL

EN User Manual

Washer Dryer

2www.aeg.com

CONTENTS

1.	SAFETY INFORMATION.............................................................................................		3
2.	SAFETY INSTRUCTIONS.............................................................................................		5
3.	INSTALLATION............................................................................................................		7
4.	PRODUCT DESCRIPTION.........................................................................................		11
5.	CONTROL PANEL.....................................................................................................		12
6.	DIAL AND BUTTONS................................................................................................		14
7.	PROGRAMMES .........................................................................................................		15
8.	SETTINGS...................................................................................................................		21
9.	BEFORE FIRST USE...................................................................................................		22
10.		DAILY USE - WASHING ONLY...............................................................................	22
11.		DAILY USE - WASHING & DRYING.......................................................................	27
12.		DAILY USE - DRYING ONLY...................................................................................	28
13.		FLUFF IN THE FABRICS..........................................................................................	29
14.		HINTS AND TIPS.....................................................................................................	30
15.		CARE AND CLEANING..........................................................................................	31
16.		TROUBLESHOOTING.............................................................................................	36
17.		CONSUMPTION VALUES.......................................................................................	40
18.		TECHNICAL DATA..................................................................................................	41
19.		ACCESSORIES.........................................................................................................	41

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information: www.aeg.com/webselfservice

Register your product for better service:

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number.

The information can be found on the rating plate. Warning / Caution-Safety information

General information and tips Environmental information

Subject to change without notice.

ENGLISH 3

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

1.1 Children and vulnerable people safetyGulf Market

WARNING!

Risk of suffocation, injury or permanent disability.

•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

•Children should be supervised to ensure that they do not play with the appliance.

•Keep all packaging away from children and dispose of it appropriately.

•Keep detergents away from children.

•Keep children and pets away from the appliance when the door is open.

•If the appliance has a child safety device, it should be activated.

•Children shall not carry out cleaning and user maintenance of the appliance without supervision.

1.2 General Safety

•Do not change the specification of this appliance.

•The appliance shall be installed as a freestanding product or below the kitchen worktop if space margins permit.

4www.aeg.com

•Do not install the appliance behind a lockable door, a sliding door or a door with a hinge on the opposite side, that would prevent the appliance door from being fully open.

•Connect the mains plug to the mains socket only at the end of the installation process. Make sure that the mains plug is accessible after installation.

•The ventilation opening in the base must not be covered by a carpet, mat, or any floor covering.

•Ensure good air ventilation in the room where the appliance is installed to avoid the backflow of unwanted gases into the room from appliances burning gas or other fuels, including open fires.

•Exhaust air must not be discharged into a flue which is used for exhausting fumes from any appliances burning gas or other fuels.

•The operating water pressure at the water entry point from the outlet connection must be between 0.5 bar (0.05 MPa) and 8 bar (0.8 MPa).

•Do not exceed the maximum load of 8 kg (refer to the "Programme chart" chapter).

•The appliance must be connected to the water mains using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre.

•Old hose sets must not be reused.

•If the mains power supply cable is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard.

•Wipe away lint or packaging debris that has accumulated around the appliance.

•Items that have been soiled with substances such as vegetable or mineral oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed separately with an extra amount of detergent before being dried in the washer dryer.

ENGLISH 5

•Do not use the appliance if items have been soiled with industrial chemicals.

•Do not dry unwashed items in the wash dryer.

•Items such as foam rubber (latex foam), shower caps, waterproof textiles, and rubber backed articles and clothes, or pillows fitted with foam rubber pads should not be dried in the washer dryer.

•Fabric softeners, or similar products, should only be used as specified by the product manufacturer’s instructions.

•Remove all objects from items that could be a source of fire ignition such as lighters or matches.

•Never stop the washer dryer before the end of the drying cycle unless all items are quickly removed and separated so that residual heat can dissipate.

•The final part of the washer dryer cycle takes place without heat (cool down cycle) to ensure that items reach a temperature that will not cause damage to them.

•Do not use high pressure water sprays and/or steam to clean the appliance.

•Clean the appliance with a moist cloth. Use only neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.

•Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.

2.SAFETY INSTRUCTIONS

2.1 Installation

The installation must comply with relevant national regulations.

•Follow the installation instructions supplied with the appliance.

•Do not install or use the appliance where the temperature can be less than 0°C or where it is exposed to the weather.

•Always keep the appliance vertical when it is being moved.

•Make sure that there is air circulation between the appliance and the floor.

•Remove all the packaging and the transit bolts.

•The floor area on which the appliance is to be installed must be flat, stable, heat resistant and clean.

•Keep the transit bolts in a safe place. If the appliance is to be moved in the future they must be reattached to lock

6www.aeg.com

the drum to prevent an internal damage.

•Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.

•Do not install or use a damaged appliance.

•Do not install the appliance where the appliance door cannot be fully opened.

•Adjust the feet to have the necessary space between the appliance and the flooring.

•When the appliance is in its permanent position, check if it is levelled correctly with the aid of a spirit level. If it is not, adjust the feet accordingly.

2.2 Electrical Connection

WARNING!

Risk of fire and electric shock.

•The appliance must be earthed.

•Always use a correctly installed shockproof socket.

•Do not use multi-plug adapters and extension cables.

•Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.

•Do not touch the mains cable or the mains plug with wet hands.

•This appliance complies with the E.E.C. Directives.

2.3Water Connection

•Do not cause damage to the water hoses.

•Before connection to new pipes, pipes not used for a long time, where repair work has been carried out or new devices fitted (water meters, etc.), let the water flow until it is clean and clear.

•Ensure that there are no visible water leaks during and after the first use of the appliance.

2.4 Use

WARNING!

Risk of injury, electric shock, fire, burns or damage to the appliance.

•This appliance is for household use only.

•Do not put flammable products or items that are wet with flammable products in, near or on the appliance.

•Do not touch the glass door while a programme is in operation. The glass can get hot.

•Do not dry damaged (torn, frayed) items that contain padding or fillings.

•If laundry has been washed with a stain remover, carry out an additional rinse cycle before starting a drying cycle.

•Make sure that all metal objects are removed from the laundry.

•Only dry fabrics that are suitable to dry in the washer dryer. Follow the cleaning instruction on the item label.

•Plastic items are not heat resistant.

–If a detergent ball is used, remove it before starting a drying programme.

–Do not use a detergent ball if setting a non-stop programme.

WARNING!

Risk of injury or damage to the appliance.

•Do not sit or stand on the open door.

•Do not dry dripping wet clothes in the appliance.

2.5Disposal

•Disconnect the appliance from the mains electrical and water supplies.

•Cut off the mains electrical cable close to the appliance and dispose of it.

•Remove the door catch to prevent children or pets from becoming trapped in the drum.

•Dispose of the appliance in accordance with local requirements for the disposal of Waste Electrical and Electronic Equipment (WEEE).

3. INSTALLATION

WARNING!

Refer to Safety chapters.

3.1 Unpacking

WARNING!

Remove all the packaging and the transit bolts before installing the appliance.

WARNING!

Use the gloves.

1.Remove the external film. If necessary, use a cutter.

2.Remove the cardboard top and the polystyrene packaging materials.

3. Remove the internal film.

ENGLISH 7

4.Open the door and remove the polystyrene piece from the door seal and all the items from the drum.

5.Carefully put down the appliance with the rear side on it.

6.Put the front polystyrene packaging element on the floor under the appliance.

Make sure not to damage the hoses.

7.Remove the polystyrene protection from the bottom.

1

8.Pull up the appliance in vertical position.

8	www.aeg.com

9.Remove the power supply cable and the drain hose from the hose holders.

It is possible to see water flowing from the drain hose. This is due to the testing with water of the appliance in factory.

10.Remove the three bolts by using the key supplied with the appliance.

11.Pull out the plastic spacers.

12.Put the plastic caps, that you find in the user manual bag, in the holes.

We recommend that you keep the packaging and the transit bolts for any movement of the appliance.

3.2 Positioning and levelling

1.Install the appliance on a flat hard floor.

Make sure that carpets do not stop the air circulation below the appliance.

Make sure that the appliance does not touch the wall or other units.

2.Loosen or tighten the feet to adjust the level.

WARNING!

Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level.

X4

The appliance must be level and stable.

A correct adjustment of the appliance level prevents the vibration, noise and the movement of the appliance when in operation.

When the machine is installed on a plinth or if a washer dryer is stacked on the washing machine, use the accessories described in chapter 'Accessories'. Read carefully the instructions supplied with the appliance and with the accessory.

3.3 The inlet hose

1.Connect the water inlet hose to the back of the appliance.

2.Position it toward left or right depending on the position of the water tap.

45O

20

Make sure that the inlet hose is not in vertical position.

3.If necessary, loose the ring nut to set it in the correct position.

ENGLISH 9

4.Connect the water inlet hose to the cold water tap with 3/4" thread.

CAUTION!

Make sure that there are no leaks from the couplings.

Do not use an extension hose if the inlet hose is too short. Contact the service centre for the replacement of the inlet hose.

3.4 Water-stop device

The inlet hose has a water stop device. This device prevents water leaks in the hose because of its natural ageing.

The red sector in the window «A» shows this fault.

A

If this occurs, close the water tap and contact the authorized service centre to replace the hose.

3.5 Water drainage

The drain hose should stay at a height of not less than 60 cm and not more than 100 cm.

10 www.aeg.com

You can extend the drain hose to maximum 400 cm. Contact the authorized service centre for the other drain hose and the extension.

It is possible to connect the drain hose in different ways:

1.Make a U shape with the drain hose and put it around the plastic hose guide.

2.On the edge of a sink - Fasten the guide to the water tap or to the wall.

Make sure that the plastic guide cannot move when the appliance drains.

Make sure that the drain hose end is not immersed in the water. There may be a return of dirty water into the appliance.

3.To a stand pipe with vent-hole - Insert the drain hose directly into a drain pipe. Refer to the illustration.

The end of the drain hose must always be ventilated , i.e. the inner diameter of the drain pipe (min. 38 mm - min. 1.5") must be larger than the external diameter of the drain hose.

4.If the end of the drain hose looks like this (see the picture), you can push it directly into the stand pipe.

5.Without the plastic hose guide, to a sink spigot - Put the drain hose in the spigot and tighten it with a clamp. Refer to the illustration.

Make sure that the drain hose makes a loop to prevent particles going into the appliance from the sink.

ENGLISH 11

6.Position the hose directly to a builtin drain pipe in the room wall and

tighten it with a clamp.

4.PRODUCT DESCRIPTION

4.1Appliance overview

1		2		3		8		9

	10
	4
	5
	11 12
	6
	7
Worktop	Drain hose
Detergent dispenser	Inlet hose connection
Control panel	Mains cable
Door handle	Transit bolts
Rating plate	Hose support
Drain pump filter
Feet for levelling the appliance

12www.aeg.com

5.CONTROL PANEL

5.1Control panel description

1		2		3

Programme

Cottons Cottons Eco Synthetics Delicates Wool/Handwash Outdoor NonStop 60min Steam Rinse Spin/Drain

On/O!

			Time Drying
			Auto Drying
		Stains	Wash
		Prewash	Dry
Temp.	Spin	Stains/	Mode
		Prewash

Quick Wash Delay Start	Start/Pause

4

5

Programme dial Display

Drying time touch button (Time Drying)

Drying level touch button (Auto Drying)

Washing and drying mode touch button (Mode)

•Wash

•Dry

5.2Display

12		11		10		9		8		7		6

Start and pause touch button (Start/ Pause)

Option touch button (Stains/Prewash) Delay Start touch button (Delay Start)

Time Saving touch button (Quick Wash)

Spin reduction touch button (Spin) Temperature touch button (Temp.) On/Off push button (On/Off)

MIX

Maximum load indicator. The indicator flashes during the laundry load estimation.

ENGLISH 13

Maximum laundry indicator. It flashes when the laundry load exceeds the maximum declared load of the selected programme. If you run a

programme when the drum is overloaded, also flashes at the end of the programme.

Drying time indicator.

Door locked indicator.

The digital indicator can show:

•Programme duration (e. g. , washing and/or drying phase).

•Delay time (e. g. or ).

•Cycle end ().

•Warning code ().

Washing phase indicator. It flashes during prewash and wash phase.

Rinsing phase indicator. It flashes during rinse phase.

The permanent Extra Rinse option:

• - one additional rinse.

• - two additional rinses.

Spinning and draining phase indicator. It flashes during spin and drain phase.

Steam phase indicator.

Drying phase indicator.

Child safety lock indicator.

Temperature indicator. The indicator appears when a cold wash is set.

Spin speed indicator. - No Spin indicator.

Iron drying indicator.

Cupboard drying indicator.

Extra drying indicator.

14 www.aeg.com

6. DIAL AND BUTTONS

6.1 Introduction

When pressing a key combination, do not tilt your fingers downwards . The sensors of the underneath buttons are sensitive and may interfere with Your choice.

6.2 On/Off

Pressing this button for a few seconds allows to activate or deactivate the appliance. Two different tunes sound while switching the appliance on or off.

As the Stand-by function automatically deactivates the appliance to decrease the energy consumption in a few cases, you may need to activate the appliance again.

For more details, refer to Stand-by paragraph in Daily Use chapter.

6.3 Introduction

The options/functions are not selectable with all washing programmes. Check the compatibility between options/functions and washing programmes in the "Programme Chart". An option/function can exclude another one, in this case the appliance doesn't allow you to set the incompatible options/functions together. Make sure the screen and touch buttons are always clean and dry.

6.4 Temp.

When you select a washing programme, the appliance automatically proposes a default temperature.

Touch this button repeatedly until the desired temperature value appears on the display.

When the display shows the indicators

and , the appliance does not heat the water.

6.5 Spin

When you set a programme, the appliance automatically sets the maximum spin speed allowed.

Touch repeatedly this button to:

• Decrease the spin speed.

The display shows only the spin speeds available for the set programme.

•Activate the No Spin option . This option is available only with the Spin Drain programme. The appliance skips all spin phases and only drains the water. The display shows the

indicator .

6.6 Stains/Prewash

Press this button repeatedly to activate one of the two options.

The relevant indicator goes on in the display.

•Stains

Select this option to add an anti-stain phase to a programme in order to treat heavily soiled or stained laundry with stain remover.

Pour the stain remover into compartment . The stain remover will be added in the appropriate phase of the washing programme.

This option is not available with a temperature lower than

40°C.

•Prewash

Use this option to add a pre-wash phase at 30 °C before the washing phase.

This option is recommended for heavily soiled laundry, especially if containing sand, dust , mud and other solid particles.