AEG L12843VIT, L11842VIT User Manual

LAVAMAT 11842 - 12843 VIT

User Manual Washer-dryer

2

Dear Customer

Thank you for choosing one of our high-quality products.
With this appliance you will experience the perfect combination of functional

design and cutting edge technology.
Convince yourself that our appliances are engineered to deliver the best

performance and control - indeed we are setting the highest standards of
excellence.

In addition to this you find environmental and energy saving aspects as an
integral part of our products.

To ensure optimal and regular performance of your appliance please read this
instruction manual carefully. It will enable you to navigate all processes perfectly
and most efficiently. To refer to this manual any time you need to, we
recommend you to keep it in a safe place. And please pass it to any future owner
of the appliance.

We wish you much joy with your new appliance.

The following symbols are used in this manual:

Important information concerning your personal safety and information on how to
avoid damaging the appliance

General information and tips

Environmental information

Contents

Contents

Instruction booklet 6

Safety information 6

Product Description 9

Detergent dispenser drawer 9

Control panel 10

Display 11
Indicator pilot lights 11

First use 13

Personalization 13

Acoustic signal 13
Child safety lock 13

3

Daily use - Washing 14

Load the laundry 14
Measure out the detergent and the fabric softener 14
Select the required programme by turning the programme selector dial 14
Select the SPIN speed or RINSE HOLD option 15
Programme option buttons 15
Select the STAIN option 16
Select the TIME SAVING option 16
Select the EXTRA RINSE 16
Select the START/PAUSE 16
Select the DELAY START 17
Altering an option or a running programme 17
Interrupting a programme 17
Cancelling a programme 18
Opening the door after the programme has started 18
At the end of the programme 18

Contents

4

Drying only 19

Select the drying programme by turning the programme selector dial 19
Select the drying time 19
At the end of the programme 20

Automatic washing and drying 20

Washing programmes 21

Programme information 23

Drying Time 24

Preparing the wash cycle 25

Sorting the laundry 25
Temperatures 25
Before loading the laundry 25
Maximum loads 25
Laundry weights 26
Removing stains 26
Detergents and additives 27
Quantity of detergent to be used 27
Degrees of water hardness 28

Preparing the drying cycle 28

Laundry not suitable for drying 28
Drying symbols label 29
Drying cycle duration 29
Additional drying 29

Care and cleaning 30

Descaling 30
After each wash 30
Maintenance wash 30
External cleaning 30
Detergent dispenser drawer 30

Contents

Washing drum 31
Door seal 31
Drain pump 31
Water inlet filter 33
Emergency emptying out 33
Frost precautions 34

What to do if... 35

Technical Data 38

Consumption value 39

Installation 40

Unpacking 40
Positioning and levelling 42
Water inlet 42
Water-stop device 43
Water drainage 43
Electrical connection 44
Permanent connection 44
Building-in 45
Preparation and assembly of the door 45

5

Enviroment concerns 47

Packaging materials 47
Old machine 47
Ecological hints 47

Safety information

6

Instruction booklet

Safety information

Prior to using for the first time

• The safety of AEG/ELECTROLUX appliances complies with the industry
standards and with legal requirements on the safety of appliances. However,
as manufacturers, we feel it is our duty to provide the following safety notes.
You MUST read them carefully before installing or using the appliance.

• It is most important that this instruction book should be retained with the
appliance for future reference. Should the appliance be sold or transferred to
another owner, or should you move house and leave the appliance, always
ensure that the book is supplied with the appliance in order that the new
owner can get to know the functioning of the appliance and the relevant
warnings.

• You MUST read them carefully before installing or using the appliance.

• Before first starting up, check the machine for any damage incurred during
transport. Never connect up a damaged machine. If parts are damaged,
contact your supplier.

• If the appliance is delivered in the winter months when there are minus
temperatures: Store the washer-dryer at room temperature for 24 hours
before using for the first time.

General safety

• It is dangerous to alter the specifications or attempt to modify this product in
any way.

• During high temperature washing and drying programmes the door glass may
get hot. Do not touch it!

• Make sure that small pets do not climb into the drum. To avoid this, please
check into the drum before using.

• Any objects such as coins, safety pins, nails, screws, stones or any other hard,
sharp material can cause extensive damage and must not be placed into the
machine.

• Only use the advised quantities of fabric softener and detergent. Damage to
the fabric can ensue if you over-fill. Refer to the manufacturer’s
recommendations of quantities.

• Wash small items such as socks, laces, washable belts etc in a washing bag or
pillow case as it is possible for such items to slip down between the tub and
the inner drum.

• Do not use your washer-dryer to wash and dry articles with whalebones,

material without hems or torn material.

• Always unplug the appliance and turn off the water supply after use, clean
and maintenance.

• Under no circumstances should you attempt to repair the machine yourself.
Repairs carried out by inexperienced persons may cause injury or serious
malfunctioning. Contact your local Service Centre. Always insist on genuine
spare parts.

Installation

• When unpacking the appliance, check that it is not damaged. If in doubt, do
not use it and contact the Service Centre.

• All packing and transit bolts must be removed before use. Serious damage can
occur to the product and to property if this is not adhered to. See relevant
section in the user manual.

• After having installed the appliance, check that it is not pressing or standing
on its electrical supply cable, inlet hose and drain hose.

• If the machine is situated on a carpeted floor, please adjust the feet in order
to allow air to circulate freely

• Always be sure, that there is no water leakage from hoses and their
connections after the installation.

• If the appliance is installed in a location subject to frost, please read the
dangers of freezing chapter.

• Any plumbing work required to install this appliance should be carried out by
a qualified plumber or competent person.

• Any electrical work required to install this appliance should be carried out by
a qualified electrician or competent person.

Safety information

7

Use

• This appliance is designed for domestic use. It must not be used for purposes
other than those for which it was designed.

• Only wash and dry fabrics which are designed to be machine washed. Follow
the instructions on each garment label.

• Do not overload the appliance. See the relevant section in the user manual.

• Before washing, ensure that all pockets are empty and buttons and zips are
fastened. Avoid washing frayed or torn articles and treat stains such as paint,
ink, rust, and grass before washing. Underwired bras must NOT be machine
washed.

• Garments which have been in contact with volatile petroleum products should
not be machine washed. If volatile cleaning fluids are used, care should be
taken to ensure that the fluid is removed from the garment before placing in
the machine.

Safety information

8

• As some duvets and eiderdowns should be washed/dried in large commercial
machines because of their bulk, please check with the manufacturer of the
item before washing in a domestic machine.

• The users should always check that they have not left their gas lighters
(disposable or otherwise) in their clothing.

• Never dry items that have had contact with chemicals such as dry cleaning
fluid.These are of a volatile nature and could cause an explosion.
Only dry items which have been washed in water or require airing

• Plastic detergent dispensers should not remain in the drum during the drying
cycle, as the plastic used is not designed to withstand the heat. If you wish to
wash-through-to-dry you should use the conventional detergent dispenser
drawer.

• Never pull the power supply cable to remove the plug from the socket; always
take hold of the plug itself.

• Never use the washer-dryer if the power supply cable, the control panel, the
working surface or the base are damaged so that the inside of the washer­dryer is accessible.

Child Safety

• This appliance is not intended for use by persons (including children) with
reduced physical sensory or mental capabilities or lack of experience and
knowledge unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.

• The packaging components (e.g. plastic film, polystyrene) can be dangerous to
children - danger of suffocation! Keep them out of children’s reach.

• Keep all detergents in a safe place out of children’s reach.

• Make sure that children or pets do not
climb into the drum. To prevent children
and pets becoming trapped inside the
drum, the machine incorporates a
special feature.
To activate this device, rotate the button
(without pressing it) inside the door
clockwise until the groove is horizontal.
If necessary use a coin. To disable this
device and restore the possibility of
closing the door, rotate the button anti­clockwise until the groove is vertical.

.

Product description

Product description

Your new appliance meets all modern requirements for effective treatment of
laundry with low water, energy and detergent consumption.

The NEW JET system allows total use of detergent and reduces water
consumption therefore saving energy.

9

Detergent dispenser drawer

1

Control panel

2

Door opening handle

3

4
5
6

Detergent dispenser drawer

Compartment for prewash phase or stain remover .
The prewash detergent is added at the beginning of the wash programme. The
stain remover is added at the proper time if the STAIN option is selected.

Compartment for powder or liquid detergent used for main wash.
Compartment for liquid additives (fabric softener, starch).

Rating plate
Drain pump
Adjustable feet

Control panel

10

Control panel

Below is a picture of the control panel. It shows the programme selector dial as
well as the buttons, pilot lights and the display. These are represented by relevant
numbers on the following pages.

1 2 3 4 5 6 7 8 9 10

1

Programme selector dial

2

SPIN reduction button

3

STAIN button

4

TIME SAVING button

5

EXTRA RINSE button

6

DRYING TIME button

7

Display

8

START/PAUSE button

9

DELAY START button

10

Indicator pilot lights

Symbols key: = Cottons, = Prewash, = Synthetics, = Easy

Iron Plus, = Delicates, = Wool, = Hand wash , = Cold, =

Delicate Rinses, = Drain, = Spin, = Synthetics drying,

= Cottons drying, = Refresh, ECO = Saving Energy programme, =

Rinse Hold, = Stain, = Time Saving, = Extra Rinse, = Drying

Time, = Start/Pause, = Door locked light, = Drying phase,

= Washing phase, = Delay Start, = Remaining Time

Display (7)

7.2

7.3

7.1

7.1

Duration of selected programme:

After selecting a programme, the duration is displayed in hours and minutes (for
example
maximum recommended load for each type of fabric. After the programme has
started, the time remaining is updated every minute.

Selected drying time

After selecting a drying programme, the drying time is displayed in minutes
and/or hours (see paragraph «Drying only»).

After the programme has started the time remaining is updated every minute.

2.05). The duration is calculated automatically on the basis of the

Display

11

Alarm codes

In the event of operating problems, some alarm codes can be displayed, for
example

E20 (see chapter «What to do if...»).

End of programme

When the programme has finished a blinking zero 0 is displayed, the
FUNCTIONING pilot light (
door can be opened.

10.1) and the pilot light of button 8 go out and the

Incorrect option selection

If an option which is not compatible with the set wash programme is selected,
the message Err is displayed for a few seconds and the yellow pilot light of
button 8 light starts blinking.

Display

12

Delay Start (7.2)

7.2

The selected delay (20 hours max) set by means of the relevant button appears
on the display for about 3 seconds, then the duration of the previously selected
programme is displayed.

The symbol
unit every hour. When only 1 hour remains, the time decreases every minute.

7.3

Child safety lock (7.3)

If your laundry is not removed during 10 minutes after the programme is
finished, the backlight of the display switches off and the energy saving system
will be enabled.

Only the pilot light of the button
to be switched off.

By pressing any buttons the appliance will come out from the energy saving
status and you could set another washing programme or swich off the appliance.

7.2 will appear on the display. The delay time value decreases by one

8 is blinking to indicate that the appliance has

Indicator pilot lights (10)

When selecting a washing programme, the FUNCTIONING pilot

10.1) illuminates.

light (
When selecting a drying programme the DRY pilot light (

illuminates and stays on during the drying phase.
The DOOR pilot light (

10.3) indicates if the door can be opened:

10.2)

10.1

10.2

10.3

● light on: the door cannot be opened.

● light off: the door can be opened.

First Use

Ensure that the electrical and water connections comply with the installation
instructions.

Remove the polystyrene block and any material from the drum.

Run a cotton cycle at 90° or 95°C, without any laundry in the machine, to
remove any manufacturing residue from the drum and tub. Pour 1/2 a measure
of detergent into the main wash compartment and start the machine.

Personalization

Acoustic signals

The machine is provided with the acoustic device, which sounds in the following
cases:

● at the end of the cycle

● in the event of operating problems

By pressing the
acoustic signal is deactivated (except for the events of operating problems).

By pressing the same buttons again, the acoustic signal is reactivated.

3 and 4 buttons simultaneously for about 6 seconds, the

Use

13

Child safety lock

This device permits you to leave the appliance unsupervised without having the
worry that children might be injured by or cause damage to the appliance.

This function remains able also when the washer-dryer is not working.
There are two different ways to set this option:

● before pressing button 8: it will be impossible to start the machine.

● after pressing button 8 it will be impossible to change any other programme

or option.

To enable (disable) this option press simoultaneously for about 6 seconds

5 buttons until the 7.3 symbol appears (disappears) on (from) the display.

4 and

Use

14

Daily Use

Load the laundry

1. Open the door by carefully pulling the door
handle outwards. Place the laundry in the
drum, one item at a time, shaking them out as
much as possible.

2. Close the door firmly. You must hear a click
during closing.
Attention! Do not embed the laundry
between the door and the rubber joint.

Measure out the detergent and the
fabric softener

Your new appliance was designed to reduce
water, energy and detergent consumption.

1. Pull out the dispenser drawer until it
stops. Measure out the amount of
detergent required, pour it into the main
wash compartment and, if you wish
to carry out the prewash phase or
STAIN action, pour the detergent or the
stain remover into the compartment
marked .

2. If required, pour fabric softener into the
compartment marked (the amount
used must not exceed the MAX mark in
the drawer). Close the drawer gently.

WASHING
Select the required programme by turning the programme

selector dial (1)

You can choose the right programme for any type of laundry following the
descriptions on the washing programme tables (see «Washing Programmes»).

Turn the programme selector dial to the required programme. The programme
selector determines the type of washing cycle (e.g. water level, drum movement,
number of rinses) and the washing temperature according to the type of laundry.

Use

15

The pilot light of button 8 starts blinking and the display shows the duration of
the selected programme.

The selector dial can be turned either clockwise or anticlockwise. Position
O/OFF corresponds to Reset programme/Switching OFF the machine.

At the end of the programme the selector dial must be turned to
position O/OFF, to switch the machine off.

For the description of each washing programmes of the selector dial,
chapter «Washing programmes».

Attention!

If you turn the programme selector dial to another programme when the

machine is working, the yellow pilot light of button
message Err is displayed on the display to indicate a wrong selection. The
machine will not perform the new selected programme.

8 will blink 3 times and the

consult the

Select the SPIN speed or RINSE HOLD option by pressing button 2

When the required programme has been selected, your appliance automatically
proposes the maximum spin speed provided for that programme.

Press this button repeatedly to change the spin speed, if you want your laundry
to be spun at a speed different from the one proposed by the washer-dryer.

RINSE HOLD: by selecting this option the water of the last rinse is not emptied
out to prevent the fabrics from creasing. At the end of the programme, a blinking

0» is displayed, the pilot light 10.3 and the light of the Rinse Hold option

«
remain lit, the pilot lights
door is locked to indicate that the water must be emptied out.

RINSE HOLD is not selectable with a NON -STOP programme (see Drying section).

To empty out the water, please read chapter «At the end of the
programme».

10.1 and the pilot light of button 8 go off and the

Programme option buttons

Depending on the programme, different functions can be combined. These must
be selected after choosing the desired programme and before pressing button

When these buttons are pressed, the corresponding pilot lights come on. When
they are pressed again, the pilot lights go out.

If an incorrect option is selected, the yellow pilot light of the button
times and the Err message appears on the display for some seconds.

For the compatibility between this option and washing programmes consult the
chapter

«Washing programmes».

8.

8 flashes for 3

Use

16

Select the STAIN option by pressing button 3

Select this option to treat heavily soiled or stained laundry with stain remover
(extended main wash with time optimised stain action phase).

This option is not available with a temperature lower than 40°C.
Attention! If you wish to perform a programme with the stain option, pour

stain remover into compartment . STAIN option is not selectable with a
prewash phase.

Select the TIME SAVING option by pressing button 4

This option allows you to modify the washing time, automatically proposed by
the washer-dryer.

DAILY: by pressing this button once, the corresponding pilot light illuminates and
the washing duration will be reduced to wash daily soiled laundry.

SUPER QUICK: by pressing this button twice, the corresponding pilot light
remains lit, the washing duration will be reduced to wash lightly soiled laundry
or items that have been used or worn for a short time. On the display will be
visualized the decreased washing time.

Select the EXTRA RINSE option by pressing button 5

This appliance is designed for saving water. However, for people with a very
delicate skin (allergic to detergents) it may be necessary to rinse the laundry
using an extra quantity of water (extra rinse).

This option can be selected with all the programmes except the wool and
handwash.

The washing machine will perform some additional rinses.

Select the START/PAUSE by pressing button 8

To start the selected programme, press this button, the corresponding red pilot
light stops blinking. The pilot light
operating.

The pilot light
To interrupt a programme which is running, press button

red pilot light starts blinking.
To restart the programme from the point at which it was interrupted, press

button
countdown. If an incorrect option is selected, the yellow pilot light of the button

10.3 is on to indicate that the door is locked.

88

again. If you have chosen a delayed start, the machine will begin the

8 blinks for 3 times the message Err is displayed for a few seconds.

10.1 is on to indicate that the appliance is

8: the corresponding

17

Select the DELAY START by pressing button 9

Before you start the programme, if you wish to delay the start, press button

9 repeatedly, to select the desired delay. The corresponding symbol will appear

on the display.
The washing programme can be delayed from 30 min - 60 min - 90 min, 2 hours

and then by 1 hour up to a maximum of 20 hours by pressing this button.
The selected delay time value will appear on the display for a few seconds, then

the duration of the programme will appear again.
You must select this option after you have set the programme and before you

press button
you press this button.

The door will be locked throughout the delay time. If you wish to add laundry in
the machine during the delay time, press button
Add the laundry, close the door and press button

Selecting the delayed start:

● Select the programme and the required options;

● Select the delay start;

● Press button 8: the machine starts its hourly countdown. The programme will

start after the selected delay has expired.

Cancelling the delayed start after having started the programme:

● set the washing machine to PAUSE by pressing button 8;

● press button 9 once until the symbol 0’ is displayed;

● press button 8 again to start the programme.

Important!

The Delay start cannot be selected with DRAIN programme

8. You can modify or cancel the delay time at any moment, before

8 to set the machine to pause.

8 again.

.

Use

17

Altering an option or a running programme

It is possible to change some option before the programme carries it out. Before
you make any change, you must pause the machine by pressing the button
Changing a running programme is possible only by resetting it. Turn the
programme selector dial to

O/OFF

Start the new programme by depressing button

and then to the new programme position.

8 again. The washing water in

the tub will be not emptied out.

Interrupting a programme

Press button 8 to interrupt a programme which is running, the corresponding
light starts blinking. Press this button again to restart the programme.

8.

Use

18

Cancelling a programme

Turn the selector dial to

O/OFF

Now you can select a new programme.

to cancel a programme which is running.

Opening the door after the programme has started

First set the machine to pause by pressing button 8. If the pilot light 10.3 goes
off, the door can be opened.

If the pilot light

10.3 remains on and the door is locked, this means that the

machine is already heating or that the water level is too high. In this case the
door cannot be opened.

If you cannot open the door but you need to open it you have to switch the
machine off by turning the selector dial to

O/OFF

. After a few minutes the
door can be opened (pay attention to the water level and temperature!).
After closing the door, it is necessary to select the programme and options again
and to press button

8.

At the end of the programme

The machine stops automatically, the pilot light of button 8, the pilot light 10.1

or 10.2 and 10.3 go off and a blinking 0 will appear on the display. Some

acoustic signals sound. The door can be opened.
If a programme or an option that ends with water still in the tub has been

selected, the pilot light
and the door is locked to indicate that the water must be emptied out before
opening the door.

Follow the instructions below to empty out the water:

● turn the programme selector dial to

● select the DRAIN or SPIN programme

● reduce the spin speed if needed, by pressing the relevant button

● press button 8

● when the programme has finished the display shows a blinking 0. The door can

now be opened.

Turn the programme selector dial to
Remove the laundry from the drum and carefully check that the drum is empty.
If you do not intend to carry out another wash, close the water tap. Leave the
door open to prevent the formation of mildew and unpleasant

10.3 and the light of the Rinse Hold option remain lit

O/OFF

O/OFF

to switch the machine off.

Use

19

DRYING only

The recommended loads size is 3 kg for cottons and linen, and 2 kg for
synthetics. Note! It is possible also to dry up to 4 kg of cotton items (see
the drying time table). The water tap must be open and the drain hose must
be positioned in the sink or connected to the drain pipe.

Select the drying programme by turning the programme selector
dial (1)

Turn the programme selector dial to the required programme for Cottons or
Synthetics in the Drying sector. The pilot light

Select the drying time by pressing button 6

With this button is possible to select the duration of the drying cycle according
to the type of fabric (cotton or synthetic). Press button
want appears on the display.

For Cottons you can select a drying time from 10 minutes to 250 minutes
For Synthetics you can select a drying time from 10 minutes to 130 minutes

))..

((

2.10

Every time you press this button the drying time increases by 5 mins. Press then
button
decreases by one unit every minute.

Note!

The programme time will automatically increase by up to 2 minutes, this is quite
normal.

8 to start the programme. The selected drying time on the display

10.2 illuminates.

6, until the time you

((

4.10

))..

Note! The different type of cottons (towelling, sheets, shirts, and so on) or
eventual laundry rolling up during spinning phase may cause a not uniform
dryness. So, in the exceptional case that at the end of the cycle the laundry
remains slightly wet, we suggest you to stretch the items rolled up out, to
redistribute evenly the laundry in the drum and to select an additional drying
cycle of 20-30 minutes.

Use

20

At the end of the programme

At the end of the drying programme, some acoustic signals sound. A blinking «0»
appears on the display, the pilot light
button
minutes. During this time the door is locked.

Note!

If you whish to open the door before or during the anti-crease phase or to inter­rupt it, press any button or turn the programme selector dial to any programme
position (except «
the «

8 go off. At this point, begins an anti-crease phase which lasts about 10

O/OFF»), the door can be opened. Turn the selector dial to

O/OFF» position to switch the machine off. Remove the laundry.

10.2 and 10.3 and the light of the

Automatic washing and drying (NON-STOP programme)

For NON-STOP programmes, the recommended load size is 3 kg for cotton and 2
kg for synthetics.

Note! It is possible also to dry up to 4 kg of cotton items (see the drying
time table).

Do not use a dosing device/ball when carrying out a washing and drying pro­gramme.

Select the washing and the drying programme by turning the
programme selector dial (1) and button 6

Switch the machine on by turning the selector dial to the selected washing
programme/temperature and press the buttons corresponding to the required
options. When selecting an «autodrying programme» the pilot lights

10.2 illuminate. If you press button 6 the DRYING TIME value appears on the

display for a few seconds, then the entire duration of the washing and drying
cycle appears again.

If possible, do not select a spin speed lower than that proposed by the appliance
to avoid a too long drying time so saving energy.

In any case the reduction of the spin speed is only possible after
selecting drying. The lowest values you can select are the following: with

drying time 900 r.p.m. for cottons and 700 r.p.m. for synthetics. Select the drying
time suitable to your laundry and start the programme by pressing button

At the end of the programme, follow the instructions given in the
corresponding previous chapter.

10.1 and

8.

Washing programmes

Washing programmes

21

Programme/

Temperature

COTTON / LINEN

95° - 60°

40 ECO
40°

COTTON COLOUR

60° - 40° - 30°

COTTON +
PREWASHING

95° - 60° - 40°

TTyyppee ooff llaauunnddrryy

White cotton

(normally soiled cotton
items)

White and coloured
cotton or mixed
fabrics normally soiled

White and coloured

cotton (normally soiled

cotton items)

White and cotton
colour (heavily soiled

cotton items)

Options

SPIN REDUCTION/

RINSE HOLD

TIME SAVING (**), STAIN,

EXTRA RINSE

SPIN REDUCTION/

RINSE HOLD, STAIN,

EXTRA RINSE

SPIN REDUCTION/

RINSE HOLD

TIME SAVING (**),

STAIN (*), EXTRA RINSE

SPIN REDUCTION/

RINSE HOLD

TIME SAVING (**),

EXTRA RINSE

Description of the

programme

Main wash, Rinses
Long spin
Max Load: Kg 6
**Reduced Load: Kg 3

Main wash, Rinses
Long spin at maximum
speed
Max Load: Kg 6

Main wash, Rinses
Long spin at maximum
speed
Max Load: Kg 6
**Reduced Load: Kg 3

Prewash, Main wash,
Rinses
Long spin at maximum
speed
Max Load Kg 6
**Reduced Load: Kg 3

SYNTHETICS

60° - 50° ­40° - 30°

EASY IRON PLUS

40°

Synthetic or mixed
fabrics

Synthetic or mixed
fabrics to be ironed

SPIN REDUCTION/

RINSE HOLD

TIME SAVING (**),

STAIN (*), EXTRA RINSE

SPIN REDUCTION/

RINSE HOLD

EXTRA RINSE

Main wash
Rinses
Short spin
Max Load Kg 3
**Reduced Load: Kg 1.5

Main wash
Rinses
Short spin
Max Load Kg 1

* Stain option can be selected only at the temperature of 40°C or higher.
** If you select the SUPER QUICK option by pressing the button

4 we recommend you

to reduce the maximum load as indicated in the table above. Full loading possible
however with somewaht reduced cleaning results.

Washing programmes

22

Washing programmes

Programme/

Temperature

DELICATES

40° - 30°

WOOL PLUS

30° - Cold

DELICATE
RINSES

DRAIN

SPIN

TTyyppee ooff llaauunnddrryy

Delicate fabrics: for
example curtains

Garments bearing the
«Pure new wool, non­shrink, machine
washable» or
«Handwash» label

Separate rinse cycle for
hand washed items

For emptying out the
water

Separate spin for
cottons

Options

SPIN REDUCTION/

RINSE HOLD

TIME SAVING (**),

STAIN (*), EXTRA RINSE

SPIN REDUCTION/

RINSE HOLD

SPIN REDUCTION/

RINSE HOLD

EXTRA RINSE

SPIN REDUCTION

Description of the

programme

Main wash
Rinses
Short spin
Max Load Kg 3
** Red. Load Kg 1.5

Main wash
Rinses
Short spin
Max Load Kg 2

Rinses
Short spin
Max Load Kg 6

Drain
Max Load Kg 6

Drain and long spin at
maximum speed
Max Load Kg 6

REFRESH

30°

ECONOMY

60°

O/OFF

For slightly soiled
fabrics, except wool

White and fast
coloured cotton ­economy, lightly-

normally soiled items

For cancelling the
programme which is
running or to switch
the machine off

SPIN REDUCTION

SPIN REDUCTION/

RINSE HOLD

STAIN, EXTRA RINSE

Main wash
Rinses

Short spin
Max Load Kg 2

Main wash
Rinses
Long spin at maximum
speed
Max Load Kg 6

Programme information

Special programme for white and coloured cotton suitable
for different washing temperatures. This programme can be
used for laundry, which should be washed at 40°C or 60°C

40 ECO

EASY IRON PLUS

WOOL/ SILK
HANDWASH

separately. So, you can put into the drum the maximum
load capacity in order to save energy and water. You will
obtain the same good washing result as a normal
programme at 60°C.

Selecting this programme the laundry is gently washed
and spun to avoid any creasing. In this way ironing is
easier. Furthermore the machine will perform additional
rinses.

Washing programme for machine washable wool as well
as for hand washable woollens and delicate fabrics with
the «hand washing» care symbol .

Note: A single or bulky item may cause imbalance. If the
appliance doesn’t perform the final spin phase, add more
items, redistribute the load manually and then select the
spinning programme

Washing programmes

23

REFRESH

ECONOMY

DELICATE RINSES

DRAIN

SPIN

Special program at 30°C, duration - approx. 30 minutes,
ideal for laundry to be refreshed: e.g. a sport jacket worn
only once or slightly soiled or new garments.

This programme can be selected for slightly or normally
soiled cotton items. The temperature will decrease and
the washing time will be extended. This allows to
obtain a good washing efficiency whilst saving energy.

With this programme it is possible to rinse and spin
garments which have been washed by hand. The machine
performs 3 rinses, followed by a final short spin. The spin
speed can be reduced by relevant button.

For emptying out the water of the last rinse in
programmes with the RINSE HOLD option. Before selecting
this programme the selector dial must be turned to O.

Separate spin for hand washed cotton items and after
programmes with the RINSE HOLD option. Before selecting
this programme the selector dial must be turned to O.
You can choose the speed by pressing the relevant button
to adapt it to the fabrics to be spun.

Drying time

24

Drying time

Degree of drying

Suitable for items
to put away with­out ironing

Suitable
for ironing

Type of fabric

Cotton and linen

(bathrobes, bath towels,
etc)

Synthetics and mixed
fabrics

Cotton and linen

(sheets, tablecloths, shirts,
etc.)

Suggested

Max load

Spin Speed

drying time

in mins

4 kg

3 kg

1.5 kg

2 kg 1200

1 kg 55 - 65

4kg

3kg

1.5 kg

1200

1400

1200

1400

1200

1400

1200

1200

1400

1200

1400

1200

1400

170 - 190

150 - 170

110 - 120

100 - 110

90 - 100

140 - 160

120 - 140

90 - 100

75 - 85

65 - 75

80 - 90

60 - 70

50 - 60

In compliance with EC directive EN 50229 the cotton reference programme for the
data entered in the Energy Label must be tested dividing the maximum washing load by
two equal parts and drying with DRYING TIME each of them.

Preparing the wash cycle

Preparing the wash cycle

Sorting out the laundry

Follow the wash code symbols on each garment label and the manufacturer’s
washing instructions. Sort the laundry as follows: whites, coloureds, synthetics,
delicates, woollens.

Temperatures

25

95° or 90°

60°/50°

40°-30°- Cold

for normally soiled white cottons and linen (e.g. tea cloths,
towels, tablecloths, sheets...).

for normally soiled, colour fast garments (e.g. shirts, night

dresses, pyjamas....) in linen, cotton or synthetic fibres and

for lightly soiled white cotton (e.g. underwear).

for delicate items (e.g. net curtains), mixed laundry
including synthetic fibres and woollens bearing the label
«pure new wool, machine washable, non-shrink».

Before loading the laundry

Never wash whites and coloureds together. Whites may lose their “whiteness” in
the wash.

New coloured items may run in the first wash; they should therefore be washed
separately the first time.

Make sure that no metal objects are left in the laundry (e.g. hair clips,
safety pins, pins).

Button up pillowcases, close zip fasteners, hooks and poppers. Tie any belts or
long tapes.

Remove persistent stains before washing.
Rub particularly soiled areas with a special detergent or detergent paste.
Treat curtains with special care. Remove hooks or tie them up in a bag or net.

Maximum loads

Recommended loads are indicated in the washing programme charts.
General rules:

Cotton, linen: drum full but not too tightly packed;
Synthetics: drum no more than half full
Delicate fabrics and woollens: drum no more than one third full.

;

Preparing the wash cycle

26

Washing a maximum load makes the most efficient use of water and energy.
For heavily soiled laundry, reduce the load size.

Laundry weights

The following weights are indicative:

bathrobe

1200 g

100 gnapkin
700 gquilt cover
500 gsheet
200 gpillow case
250 gtablecloth
200 gtowelling towel
100 gtea cloth
200 gnight dress
100 gladies’ briefs
600 gman’s work shirt
200 gman’s shirt
500 gman’s pyjamas
100 gblouse
100 gmen’s underpants

Removing stains

Stubborn stains may not be removed by just water and detergent. It is therefore
advisable to treat them prior to washing.

Blood: treat fresh stains with cold water. For dried stains, soak overnight in
water with a special detergent then rub in the soap and water.

Oil based paint: moisten with benzine stain remover, lay the garment on a soft
cloth and dab the stain; treat several times.

Dried grease stains: moisten with turpentine, lay the garment on a soft
surface and dab the stain with the fingertips and a cotton cloth.

Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be
careful with rust stains which are not recent since the cellulose structure will
already have been damaged and the fabric tends to hole.

Mould stains: treat with bleach, rinse well (whites and fast coloureds only).
Grass: soap lightly and treat with bleach (whites and fast coloureds only).
Ball point pen and glue: moisten with acetone (*), lay the garment on a soft

cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat stains with methylated

spirits. Treat any residual marks with bleach.

Preparing the wash cycle

Red wine: soak in water and detergent, rinse and treat with acetic or citric acid,
then rinse. Treat any residual marks with bleach.

Ink: depending on the type of ink, moisten the fabric first with acetone (*), then
with acetic acid; treat any residual marks on white fabrics with bleach and then
rinse thoroughly.

Tar stains: first treat with stain remover, methylated spirits or benzine, then rub
with detergent paste.

(*) do not use acetone on artificial silk.

Detergents and additives

Good washing results also depend on the choice of detergent and use of the
correct quantities to avoid waste and protect the environment.

Although biodegradable, detergents contain substances which, in large
quantities, can upset the delicate balance of nature.

The choice of detergent will depend on the type of fabric (delicates, woollens,
cottons, etc.), the colour, washing temperature and degree of soiling.

All commonly available washer-dryer detergents may be used in this appliance:

• powder detergents for all types of fabric,

• powder detergents for delicate fabrics (60°C max) and woollens,

• liquid detergents, preferably for low temperature wash programmes (60°C
max) for all types of fabric, or special for woollens only.

The detergent and any additives must be placed in the appropriate
compartments of the dispenser drawer before starting the wash programme.

If using liquid detergents, a programme without prewash must be selected.

The washer-dryer incorporates a recirculation system which allows an optimal
use of the concentrated detergent.

Pour liquid detergent into the dispenser drawer compartment marked just
before starting the programme.

Any fabric softener or starching additives must be poured into the compartment
marked before starting the wash programme.

Follow the product manufacturers’ recommendations on quantities to use and do

not exceed the «MAX» mark in the detergent dispenser drawer.

27

Quantity of detergent to be used

The type and quantity of detergent will depend on the type of fabric, load size,
degree of soiling and hardness of the water used.

Follow the product manufacturers’ instructions on quantities to use.

Preparing the drying cycle

28

Use less detergent if:

• you are washing a small load,

• the laundry is lightly soiled,

• large amounts of foam form during washing. For the stain treatment before
the washing cycl, follow the product manufacturers’ instructions on
detergent quantities. If you use any specific product to remove the stains, you
must start the cycle of washing immediately .

Degrees of water hardness

Water hardness is classified in so-called “degrees” of hardness. Information on
hardness of the water in your area can be obtained from the relevant water
supply company, or from your local authority.

Degrees of water hardness

Level

1
2 medium 8-14 16-25
3 hard 15-21 26-37
4 very hard

Note: A water softener must be added when water has a medium-high degree
of hardness (from degree of hardness II). Follow the manufacturer’s instructions.
The quantity of detergent can then always be adjusted to degree of hardness I (=
soft).

Characteristic

soft

GGeerrmmaann

°°ddHH

0-7 0-15

> 21 > 37

FFrreenncchh

°°TT..HH..

Preparing the drying cycle

As a dryer, the machine works on the condensation principle

Therefore, the water tap must be open and the drain hose must drain
water into a sink or into the drain pipe, even during the drying cycle.

Attention!
Before starting the drying programme, reduce the loads of washed laundry, in

order to obtain good performances.

Laundry not suitable for drying

• Particularly delicate items such as synthetic curtains, woollen and silk, garments

with metal inserts, nylon stockings, bulky garments such as anoraks, bedcovers,
quilts, sleeping bags and duvets must not be machine dried.

.

• Avoid drying dark clothes with light coloured fluffy items such as towels as these

can attract the fluff.

• Remove the laundry when the appliance has finished drying.

• To avoid a static charge when drying is completed, use either a fabric softener

when you are washing the laundry or a fabric conditioner specifically for tum­ble dryers.

• Garments padded with foam-rubber or materials similar to foam-rubber must
not be machine dried; they represent a fire hazard.

• Also, fabrics containing residues of setting lotions or hair sprays, nail solvents or
similar solutions must not be machine dried in order to avoid the formation of
harmful vapours.

Gargment’s labels

For drying, follow the indications given on the manufacturer’s labels:

May be tumble dried

Drying at high temperature

Drying at reduced temperature

Do not tumble dry.

29

Drying cycle duration

The drying time may vary depending on:

• speed of the final spin

• dryness degree required (iron dry, store dry)

• type of laundry

• wheight of the load size

The average drying time for a timed drying are indicated in the «Drying Time»
chapter. The experience will help you to dry your laundry in a more suitable way,
according to the different fabrics. Take note of the duration drying time of the
already performed cycles.

Additional drying

If the laundry is till dump at the end of the drying programme, select again a short
drying.

Attention! Do not over dry the laundry in order to avoid creasing of
fabrics or garment’s shrinking .

Care and cleaning

30

Care and cleaning

You must DISCONNECT the appliance from the electricity supply, before you can
carry out any cleaning or maintenance work.

Descaling

The water we use normally contains lime. It is a good idea to periodically use a
water softening powder in the machine. Do this separately from any laundry
washing, and according to the softening powder manufacturer's instructions.

This will help to prevent the formation of lime deposits.

After each wash

Leave the door open for a while. This helps to prevent mould and stagnant smells
forming inside the appliance. Keeping the door open after a wash will also help
to preserve the door seal.

Maintenance wash

With the use of low temperature washes it is possible to get a build up of
residues inside the drum.

We recommend that a maintenance wash be performed on a regular basis.
To run a maintenance wash:

• The drum should be empty of laundry.

• Select the hottest cotton wash programme.

• Use a normal measure of detergent, must be a powder with biological
properties

.

External cleaning

Clean the exterior cabinet of the appliance with soap and water only, and then
dry thoroughly.
Important! Do not use methylated spirits, solvents or similar products to clean
the cabinet.

Detergent dispenser drawer

The detergent dispenser drawer should be cleaned
regularly.

1. Remove the detergent dispenser drawer by
pressing the catch downwards and by pulling it
out. To aid cleaning, the top part of the
additive compartment should be removed.

Care and cleaning

2. Flush it out under a tap, to remove any
traces of accumulated powder.

3. Having removed the drawer, use a small
brush to clean the recess, ensuring that
all washing powder residue is removed
from the upper and lower part of the
recess.

4. Replace the drawer and run the rinse
programme without any clothes in the
drum.

Washing drum

Rust deposits in the drum may occur due to rusting foreign bodies in the
washing or tap water containing iron.

Important! Do not clean the drum with acidic descaling agents, scouring agents
containing chlorine or iron or steel wool.

1. Remove any rust deposits on the drum with a cleaning agent for stainless
steel.

2. Run a washing cycle without any washing to clean off any cleaning agent
residues. Programme: COTTONS/LINEN 90° or 95°C, press button
approx. 1/4 measuring cup of detergent.

31

4, add

Door seal

Check from time to time the door seal and eliminate
eventual possible objects that could be trapped in the
fold.

Drain pump

The pump should be inspected regularly and particularly if

• the machine does not empty and/or spin

• the machine makes an unusual noise during draining due to objects such as
safety pins, coins etc. blocking the pump.

Care and cleaning

32

Proceed as follows:

1. Disconnect the appliance.

2. If necessary wait until the water has

cooled down.

3. Place a container close to the pump (A)
to collect any spillage.

4. Release the emergency emptying hose
(B), place it in the container and
remove its cap.

5. When no more water comes out,
unscrew the pump cover and remove it.
Always keep a rag nearby to dry up
spillage of water when removing the
pump.

6. Remove any objects from the pump
impeller by rotating it.

A

B

7. Replace the cap on the emergency
emptying hose and place the latter
back in its seat.

8. Screw the pump cover fully in.

Warning!

When the appliance is in use and
depending on the programme selected
there can be hot water in the pump.

Never remove the pump cover during a
wash cycle, always wait until the appliance
has finished the cycle, and is empty. When
replacing the cover, ensure it is securely
retightened so as to stop leaks and young
children being able to remove it.

Care and cleaning

Water inlet filter

If you notice that the machine is taking longer to
fill, check that the filter in the water inlet hose is
not blocked.

1. Turn off the water tap.

2. Unscrew the hose from the tap.

3. Clean the filter in the hose with a stiff brush.

4. Screw the hose back onto the tap.

Emergency emptying out

If the water is not discharged, proceed as follows to empty out the machine:

1. pull out the plug from the power socket;

2. close the water tap;

3. if necessary, wait until the water has cooled down;

4. place a bowl on the floor and place the end of the emergency emptying hose

into the bowl. Remove its cap. The water should drain by gravity into the
bowl. Whem the bowl is full, put the cap back on the hose. Empty the bowl.
Repeat the procedure until water stops flowing out;

5. clean the pump if necessary as previously described;

6. replace the emergency emptying hose in its seat after having plugged it;

7. screw the pump cover again.

33

Care and cleaning

34

Frost precautions

If the machine is installed in a place where the temperature could drop below
0°C, proceed as follows:

1. Close the water tap and unscrew the water inlet hose from the tap.

2. Place the end of the emergency emptying hose and that of the inlet hose in a

bowl placed on the floor and let water drain out.

3. Screw the water inlet hose back on and reposition the emergency emptying
hose after having put the cap on again

By doing this, any water remaining in the machine is removed, preventing ice
forming and consequently damage to the appliance.

When you use the machine again, make sure that the ambient temperature is
above 0°C.

.

What to do if...

What to do if...

Certain problems are due to lack of simple maintenance or oversights, which can
be solved easily without calling out an engineer. Before contacting your local
Service Centre, please carry out the checks listed below.

During machine operation it is possible that the yellow pilot light of button
blinks, one of the following alarm codes appears on the display and at the same
some acoustic signals sound every 20 seconds to indicate that the machine is
not working:

E10 : problem with the water supply

•

•

E20 : problem with the water draining

•

E40 : door open.

88

Once the problem has been eliminated, press button
If after all checks, the problem persists, contact your local Service Centre.

Problem Possible cause/Solution

The door has not been closed. E40

• Close firmly the door.
The plug is not properly inserted in the power socket.

• Insert the plug into the power socket.
There is no power at the socket.

• Please check your domestic electrical installation.
The main fuse or the fuse in the plug has blown.

• Replace the fuse.

The washer-dryer does not start:

The machine does not fill:

The selector dial is not correctly positioned and the
button

8 has not been depressed.

• Please turn the selector dial and press button 8

again.

The delay start has been selected.

• If the laundry is to be washed immediately, cancel
the delay start.

The Child safety lock has been activated.

• Deactivated this device.

The water tap is closed. E10

• Open the water tap.

The inlet hose is squashed or kinked.

• Check the inlet hose connection.

The filter in the inlet hose is blocked.

• Clean the water inlet hose filter.

The door is not properly closed.

• Close the door firmly.

to restart the programme.

E40

35

8

E10

E10

36

What to do if...

Problem Possible cause/Solution

The machine fills then empties
immediately:

The machine does not empty
and/or does not spin:

There is water on the floor:

Unsatisfactory washing results:

The end of the drain hose is too low.

• Refer to relevant paragraph in «water drainage»
section.

The drain hose is squashed or kinked. E20

• Check the drain hose connection.

The drain filter is clogged.

• Clean the drain filter.

An option/programme that ends with the water still
in the tub or eliminates all the spinning phases has
been selected.

• Select the draining or the spinning programme.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

Too much detergent or unsuitable detergent (creates
too much foam) has been used.

• Reduce the detergent quantity or use another one.

Check whether there are any leaks from one of the
inlet hose fittings. It is not always easy to see this as
the water runs down the hose; check to see if it is
damp.

• Check the water inlet hose connection.

The inlet/drain hose is damaged.

• Replace it with a new one.

The cap on the emergency emptying hose has not
been replaced or the filter has not been properly
screwed in after cleaning action.

• Refit the cap on the emergency emptying hose or
screw the filter fully in.

Too little detergent or unsuitable detergent has been
used.

• Increase the detergent quantity or use another one.

Stubborn stains have not been treated prior to
washing.

• Use commercial products to treat the stubborn
stains

.

The correct temperature was not selected.

• Check if you have selected the correct temperature.

Excessive laundry load.

• Reduce the laundry load.

E20

Problem Cause possible/Solution

The door will not open:

The machine vibrates or is noisy:

Spinning starts late or the machine
does not spin:

What to do if...

The programme is still running.

• Wait the end of washing cycle.

The door lock has not been released.

• Wait until the pilot light 10.3 goes off.

There is water in the drum.

• Select drain or spin programme to empty out the
water.

The transit bolts and packing have not been removed.

• Check the correct installation of the appliance.

The support feet have not been adjusted

• Check the correct levelling of the appliance.

The laundry is not evenly distributed in the drum.

• Redistribute the laundry.

Maybe there is very little laundry in the drum.

• Load more laundry.

The electronic unbalance detection device has cut in
because the laundry is not evenly distributed in the
drum. The laundry is redistributed by reverse rotation
of the drum. This may happen several times before
the unbalance disappears and normal spinning can
resume. If, after some minutes, the laundry is still not
evenly distributed in the drum, the machine will not
spin.

• Redistribute the laundry.

The load is too small.

• Add more items, redistribute the load manually and
then select the spinning programme.

37

The machine does not dry or does
not dry properly

No water is visible in the drum:

The drying time has not been selected.

• Select the drying time.

The water tap is not turned on (

• Open the water tap.

The drain filter is clogged (

• Clean the drain filter.

The machine is overloaded.

• Introduce into the drum less laundry.

The selected drying programme or time was not
suitable for the laundry.

• Select the suitable drying programme or time for
the laundry.

Machines based on modern technology operate very
economically using very little water without affecting
performance.

E10).

E20).

Technical data

Mod. ..........

Prod. No. ...........

Ser. No. .........

Mod. ..........

Prod. No. ...........

Ser. No. .........

P0042 BD

38

If you are unable to identify or solve the problem,
contact our service centre. Before telephoning,
make a note of the model, serial number and
purchase date of your machine: the Service Centre
will require this information.

Technical Data

Dimensions

Electrical connection

Water supply pressure

Maximum Load

Maximum Dry Load

Spin Speed

Width
Height
Depth

60 cm
82 cm
54 cm

(door included)

Information on the electrical connection is given on the
rating plate on the inner edge of the appliance door.

Minimum
Maximum

Cottons 6 kg

Cotton
Cotton Big capacity
Synthetics

Maximum

1200 rpm (L 11842 VIT)

1400 rpm (L 12843 VIT )

0,05 MPa
0,80 MPa

3kg
4kg
2kg

Consumption value

Consumption value

39

Programme

White Cottons 95° 57 2.1

Cottons 60° 53 1.2

(*) Cotton ECONOMY 60° 42 1.02

Cottons 40° 53 0.9

Synthetics 60° 44 0.9

Delicates 40° 56 0.55

Wool ( Handwash) 30° 58 0.25

Water consumption

(lltres)

Energy consumption

(KWh)

Programme duration

The consumption data shown on this chart is to be considered purely indicative,
as it may vary depending on the quantity and type of laundry, on the inlet water
temperature and on the ambient temperature.

(*) «Economy 60°C» with a load of 6 kg is the reference programme for the data
entered in the energy label, in compliance with EEC 92/75 standards.

(Minutes)

control panel.

to the display on the

For the duration of the

programmes, please refer

Installation

HEC0008

A

40

Installation

Unpacking

All transit bolts and packing must be removed
before using the appliance.

You are advised to keep all transit devices so that
they can be refitted if the machine ever has to be
transported again.

1. After removing all the packaging, carefully lay
machine on it’s back to remove the polystyrene base
from the bottom.

2. Remove the power supply cable and the draining hose
from the hose holders on the rear of the appliance.

3. With the supplied spanner unscrew and

A

remove the central rear bolt

.

4. Unscrew and remove the two large rear bolts B

C

C

B

D

B

C

C

E

and the six smaller bolts C.

5. Remove the bracket D and refit the six smaller
bolts C. Slide out the relevant plastic spacer E.

6. Open the porthole, take out the inlet hose from

the drum.

Installation

41

7. Fill the smaller upper hole and the two large ones with
the corresponding plastic plug caps supplied in the bag
containing the instruction booklet.

8. Connect the water inlet hose as described under the
paragraph «Water inlet».

All the different plug caps are supplied with the
appliance in the plastic bag containing the instruction
booklet.

Installation

42

Positioning and levelling

Install the machine on a flat hard floor.
Make sure that air circulation around the machine is

not impeded by carpets, rugs etc.
Before placing it on small tiles, apply a rubber

coating.
Never try to correct any unevenness in the floor by

putting pieces of wood, cardboard or similar
materials under the machine.

If it is impossible to avoid positioning the machine
next to a gas cooker or coal-burning stove, an
insulating panel covered with aluminium foil on the
side facing the cooker or stove, must be inserted
between the two appliances.

The machine must not be installed in rooms where
the temperature can drop below 0.

The water inlet hose and the drain hose must not be
kinked.

Please ensure that when the appliance is installed, it is easily accessible for the
engineer in the event of a breakdown.

Carefully level by screwing the adjustable feet in or out. Never place cardboard,
wood or similar materials under the machine to compensate for any unevenness
in the floor. After having levelled the machine, tighen the lock nuts.

Water inlet

An inlet hose is supplied and can be found inside the machine drum.

Do not use the hose from your previous machine to connect to the
water supply.

This appliance must be connected to a cold water supply.

1. Open the porthole and extract the inlet hose.

2. Connect the hose with the angled connection to

the machine.

Do not place the inlet hose downwards. Angle
the hose to the left or right depending on the
position of your water tap.

3. Set the hose correctly by loosening the ring nut.

After positioning the inlet hose, be sure to tighten
the ring nut again to prevent leaks.

HEC0006

Installation

A

352

4. Connect the hose to a tap with a 3/4” thread.
Always use the hose supplied with the appliance.

Installation should comply with local water authority
and building regulations requirements. A minimum
water pressure of 0.05 MPa is required for safe
operation of the appliance.

If you cannot make the cold water connection direct
from the rising mains, you may be able to operate the
appliance from your cold water storage system. There should be a minimum verti­cal distance of between the appliance’s inlet and the bottom of the water storage
tank.

Water-stop device

The inlet hose is provided with a water stop device,
which protects against damage caused by water
leaks in the hose which could develop due to
natural ageing of the hose. This fault is shown by a
red sector in the window “A”. Should this occur,
turn the water tap off and refer to your Service
Centre to replace the hose.

43

Water drainage

The end of the drain hose can be positioned in three ways:

Hooked over the edge of a sink using the
plastic hose guide supplied with the machine.

In this case, make sure the end cannot come
unhooked when the machine is emptying.

This could be done by tying it to the tap with a piece
of string or attaching it to the wall.

In a sink drain pipe branch. This branch must be
above the trap so that the bend is at least 60 cm above
the ground.

Directly into a drain pipe at a height of not less than 60 cm and not more
than 90 cm.

The end of the drain hose must always be ventilated, i.e. the inside diameter of
the drain pipe must be larger than the outside diameter of the drain hose.

Installation

P1118

44

The drain hose must not be kinked.

Important!

The drain hose may be extended to a maximum of 4 metres. An additional drain hose and
joining piece is available from your local Service Centre.

Electrical connection

Information on the electrical connection is given on the rating plate on the inner
edge of the appliance door.

Check that your domestic electrical installation can take the maximum load
required, also taking into account any other appliances in use.

Connect the machine to an earthed socket.

The manufacturer does not accept any responsibility for damage or
injury through failure to comply with the above safety precaution.

The power supply cable must be easily accessible after installing the
machine.

Should the appliance power supply cable need to be replaced, this must
be carried out by a Service Centre.

Permanent connection

In the case of a permanent connection it is necessary that you install a double pole
switch between the appliance and the electricity supply (mains), with a minimum
gap of 3 mm between the switch contacts and of a type suitable for the required
load in compliance with the current electrical regulations.
The switch must not break the yellow and green earth cable at any point.
This operation must be performed by a qualified electrician.

The power supply cable must be easily accessible after installing the
machine.

Building-in

820 min

600

min.

600

596

416

176

,

5

818

541

195

490

160

120

90

8

515

165

A

600

4

1

2

3

6

1

2

3

5

7

8

B

35 Ø 12.5-14 depth

16-22

B

C

22+1,5

595-598

416

C

This appliance has been designed to be built into
the kitchen furniture.
The recess should have the dimensions shown in
picture

A.

Preparation and assembly of the door

The machine is originally pre-arranged for the
assembly of a door opening from right to left.
In this case it is sufficient to screw in the hinges
(1) and the counter-magnet (6) provided with the
appliance, at the right level (Fig. B).

Installation

45

a) Door

The dimensions of the door should be:

- width 595-598 mm

- thickness 16-22 mm

The height (C-Fig. C) depends on the height of
the adjacent furniture's base.

b) Hinges

To mount the hinges it is necessary to drill two
holes (dia. 35 mm, depth 12.5-14 mm depending
on the depth of door furniture) on the inner side
of the door. The distance between the holes hobs
fixing centres must be 416 mm.
The distance (B) from upper edge of the door to
the centre of the hole depends on the adjacent furniture's dimensions.
The required dimensions are given in the picture C.
The hinges will be fixed to the door by means of screws for wood (2-Fig. B) sup­plied with the appliance.

Installation

6

4

8

D

4

6

5

1

2

3

7

8

E

46

c) Mounting the door

Fix the hinges (1) to the machine by means of the M5x15 screws (3-Fig. B). The
hinges can be adjusted to compensate for possible uneven thickness of the door.
To align the door perfectly it is necessary to loosen the screw (3-Fig. B), adjust
the door and tighten the screw again.

d) Counter-magnet (6)

The appliance is pre-arranged for a magnetic clo­sure of the door. To enable a correct operation of
this device, it is necessary to screw the counter­magnet (6) (steel disk + rubber ring) into the
inner side of the door.
Its position must correspond to the magnet (4)
on the appliance (see picture D).

If the door has to be opened from left to right,
invert the position of the plates (7), the magnet
(4) and the plate (5) (Fig. B and E). Mount the
countermagnet (6) and the hinges (1) as
previously described.

Environment concerns

Environment concerns

Packaging materials

The materials marked with the symbol are recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by disposing of them properly in

appropriate collection containers.

Old machine

Use authorised disposal sites for your old appliance. Help to keep your country
tidy!

The symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this
product. For more detailed information about recycling of this product, please
contact your local council, your household waste disposal service or the shop
where you purchased the product.

47

Ecological hints

To save water, energy and to help protect the environment, we recommend that
you follow these tips:

• Normally soiled laundry may be washed without prewashing in order to save

detergent, water and time (the environment is protected too!).

• The machine works more economically if it is fully loaded.

• With adequate pre-treatment, stains and limited soiling can be removed; the

laundry can then be washed at a lower temperature.

• Measure out detergent according to the water hardness, the degree of soiling

and the quantity of laundry being washed.

www.electrolux.com

www.aeg-electrolux.com

132 962 910-00-322008 Subject to change without notice