AEG FAVORIT 88070 User Manual

FAVORIT 88070 VIL
Dishwasher
Instruction book
PERFEKT IN FORM UND FUNKTION
152963991en per CH.qxp 03/08/2004 13.38 Pagina 1
2
Dear customer,
The following symbols are used in the text:
Safety instructions
Warning! Notes that concern your personal safety. Attention! Notes that show how to avoid damage to the appliance.
Useful tips and hints
Environmental information
Your dishwasher has the new washing system ”IMPULSE WASHING”. With this dishwashing system the motor speed and spray pressure are varied during the wash cycle to achieve better cleaning of the dishes. It is for this reason that the noise level varies during the dishwashing cycle.
152963991en per CH.qxp 03/08/2004 13.38 Pagina 2
CONTENTS
Operating instructions 4
Safety instructions 4 Disposal 6 Economical and ecological dishwashing 6 Description of the appliance 7 The control panel 8 Prior to using for the first time 13
Setting the water softener 13 Filling the with salt 15 Rinse aid 16
In daily use 18
Loading cutlery and dishes 18 The lower basket 19 The cutlery basket 20 The upper basket 21 Adjusting the height of the upper basket 22 Use of detergent 23 Different kinds of detergent 24
Washing programmes 26 Starting a washing programme 27
Unloading the dishwasher 29
Maintenance and cleaning 30
Cleaning the filters 30
What to do, when... 33
Service 36
Technical specifications 37
Installation instructions 38
Building-in 38 Levelling 38 Fixing to the adjacent units 38 Water supply connections 39 Water inlet hose with safety valve 40 Water outlet hose connection 41 Electrical connection 42
Hints for test centres 43
Contents
3
152963991en per CH.qxp 03/08/2004 13.38 Pagina 3
OPERATING INSTRUCTIONS
Safety instructions
The safety of AEG electrical appliances conforms to accepted rules of technology and the Appliance Safety Act. We as manufacturers, however, see ourselves as being obliged to familiarise you with the following safety instructions.
It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.
This information has been provided in the interest of your safety. You MUST read it carefully before installing or using the appliance.
Installation
Check your dishwasher for any transport damage. Never connect a
damaged machine. If your dishwasher is damaged, you should contact your supplier.
For safety reasons it is dangerous to alter the specifications or
attempt to modify this product in any way.
Any electrical and plumbing work required to install this appliance
should be carried out by a qualified and competent person.
Care must be taken to ensure that the appliance does not stand on
the electrical supply cable.
The sides of the dishwasher must never be drilled to prevent
damage to hydraulic components.
Child safety
This appliance is designed to be operated by adults.
Children should not be allowed to tamper with the controls or play
with the product.
Packaging parts may be dangerous for children, who could even be
suffocated! You should therefore keep all packaging well away from children.
Operating instructions
4
152963991en per CH.qxp 03/08/2004 13.38 Pagina 4
The water in your dishwasher is not for drinking. Detergent residues
may still be present in your machine. Keep children well away from your dishwasher when the door is open.
Keep all detergents in a safe place out of children’s reach.
Your dishwasher in day-to-day use
Items that are contaminated by petrol, paint, steel or iron debris,
corrosive, acidic or alkaline chemicals must not be washed in this dishwasher.
Under no circumstances should you open the door whilst the
appliance is in operation, especially during the washing phase, hot water may escape. However, if the door is opened, a safety device ensures that the machine stops.
Only use products (detergent, salt and rinse aid) specifically
designed for use in dishwashers.
Long bladed knives stored in an upright position are a potential
hazard.
Long and/or sharp items of cutlery such as carving knives must be
positioned horizontally in the upper basket.
Ensure that the door of the dishwasher is always closed when it is
not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves.
Do not sit or stand on the open door.
Isolate the appliance from the power supply and turn off the water
supply after use.
This product should be serviced by an authorised service engineer,
and only genuine spare parts should be used.
Under no circumstances should you attempt to repair the machine
yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.
Operating instructions
5
152963991en per CH.qxp 03/08/2004 13.38 Pagina 5
Disposal
Dispose of the dishwasher packaging material correctly. All packaging materials can be recycled.
Plastic parts are marked with standard international abbreviations: >PE< for polyethylene, e.g. sheet wrapping material.
>PS< for polystyrene, e.g. padding material (always CFC-free). >POM< for polyoxymethylene, e.g. plastic clips.
Cardboard packaging is manufactured from recycled paper and should be deposited in the waste paper collection for recycling.
As and when you cease to use your dishwasher and withdraw it from service, your should render it unserviceable before having it disposed of.
Warning! Children at play could lock themselves in your dishwasher or otherwise endanger their lives. Therefore cut off the power supply cable and make the door closing device unusable to prevent children from being trapped inside.
For the disposing of the appliance please take it to a recycling centre or to your dealer who will, for a small contribution to the costs, dispose it for you.
Economical and ecological dishwashing
Ensure that the water softener is correctly adjusted.
Do not pre-wash under running water.
Select the wash programme to suit the nature and degree of the
soiling on the dishes.
Do not use more detergent, special salt and rinse aid than is
recommended in these operating instructions and by the manufacturer of the respective product.
Operating instructions
6
152963991en per CH.qxp 03/08/2004 13.38 Pagina 6
Operating instructions
7
Description of the appliance
1. Upper basket stop
2. Water hardness switch
3. Salt container
4. Detergent dispenser
5. Control panel
6. Rating plate
7. Rinse aid dispenser
8. Filters
9. Lower spray arm
10. Upper spray arm
11. Upper basket
IN153
152963991en per CH.qxp 03/08/2004 13.38 Pagina 7
Operating instructions
8
DIRECTION buttons: these 2 buttons have a double function:
a) selecting within the Programmes menu b) selecting within the Options menu and the submenu.
“OK START” button: is necessary for:
- confirm / memorize any option,
- start a washing programme. NOTE: the OK START and OPTION buttons, if pressed simultaneously
have the RESET function. This function allows to:
- cancel awashing programme in progress, It is also possible to return to the factory setting for the following op-
tions:
LANGUAGE (factory setting ENGLISH). BRIGHTNESS (factory setting: level 10).
In setting mode press for about 6 second these 2 buttons simultaneously; the message LANGUAGE ENGLISH will appear in the display.
The control panel
On/Off button
OK START
button
DIRECTION
buttons
DISPLAY
OPTION
button
152963991en per CH.qxp 03/08/2004 13.38 Pagina 8
Operating instructions
9
DISPLAY
Symbols: indicate the various options
In this row several details are displayed:
- setting mode, guide to the selection of the washing programmes, duration time of the programme, options (when together with the washing proramme one or more options are set, the update of the programme duration will occur automatically.
- Once the programme has started, idicates the sequence of the running phase and the running time of the programme in progress.
Washing phases: during the progress of the programme these little bars indicate the phase of the washing programme: prewash, main wash, rinses, drying.
The symbols have the following meaning:
Delay start: fixed in setting mode, flashing when in progress
3 in 1 detergent option: is illuminated when the function for the use of 3 in 1 combi detergents is active.
Exclusion of the volume for alarm and end of programme audible signals (level O).
Is illuminated when the 70°C Intensive washing programme is set. This programme makes it possible to thoroughly disinfect dishes and glasses, such as baby bottles or jam jars.
152963991en per CH.qxp 03/08/2004 13.38 Pagina 9
Operating instructions
10
OPTION button: press the button to enter a menu of options, press
again to exit from menu.
How to set the options
1. Press OPTION button
2. Press DIRECTION buttons until the desired option is
displayed:
- DELAY START
- 3 IN 1
- SETTINGS . . .
3. Press OK START to select the option.
4. Press DIRECTION buttons until the selection of the desired submenu
is displayed.
SETTINGS ... allows you to enter another menu of options with relative submenu (see following table): to set the options it is necessary to repeat the setting from point 3.
MENU SUBMENU
DELAY START Allows the start of the washing programme to be
delayed from 1 hour up to 19 hours.
3 IN 1 Set the dishwasher for the use of conventional,
concentrated detergents or combi detergents (3 in 1)
YES: fu
nction activated. The symbol appears in
the display. With the activation of this function, the rinse aid
dispenser and salt conteiner are automatically deactivated and consequently also the display indications for the refilling of salt and rinse aid are deactivated. NO:- for conventional, alkaline detergents with
caustic components
- for low alkaline concentraded detergents with natural enzymes.
152963991en per CH.qxp 03/08/2004 13.38 Pagina 10
Operating instructions
11
5. Press OK START button: the option is memorised.
6. For each option it is necessary to repeat the setting from point 2.
7. To exit from menu, press OPTION button.
If a programme has been set:
- press OK START button and close the door: the programme will start automatically.
If a programme has not been set:
- press DIRECTION buttons until is displayed the desired washing programme
- press OK START button and close the door: the programme will start automatically.
MENU SUBMENU
LANGUAGE Allows you view messages that appear in the
display in the required language (Factory setting: english)
WATER HARDNESS Allows you to set electronically the water softener
according to the hardness of the local area water: water hardness is measured in 10 levels.
RINSE AID Allows you to deactivate or activate the dosage of
rinse aid:
- YES rinse aid dosage activated,
-NOrinse aid dosage deactivated.
SOUND VOLUME Allows you to adjust the volume of the alarm
signals and of the end of programme signal (from 0 to 5). Level 0 means the deactivation of the volume of all signals and the symbol
appears in the display.
BRIGHTNESS Allows you to increase or decrease the brightness of
the background of the display, 10 differetn levels can be selected.
152963991en per CH.qxp 03/08/2004 13.38 Pagina 11
The options can be set only before the start of a washing programme. Once set, these options will remain activated also for the following
cycles, until they will be deactivated, except for DELAY START.
First use
The first time the dishwasher is switched on, it is possible to select a different language in which the machine will visualize the messages on the display.
The factory setting is in english, therefore the message LANGUAGE ENGLISH will appear in the display; the word ENGLISH flashes.
Press SCORRIMENTO MENU buttons until the language required appears in the display.
To confirm the selection press OK START button. If, insted of a different language, a washing programme is
immediately.set, the dishwsher will memorize the display of the message in english.
It will be always possible to select another language another time, simly follow the instructions given for the setting of the options.
Operating instructions
12
152963991en per CH.qxp 03/08/2004 13.38 Pagina 12
Operating instructions
13
Prior to using for the first time
Before using your dishwasher for the first time:
1. Ensure that the electrical and water connections comply with the installation instructions
2. Remove all packaging from inside the appliance
3. Set the water softener
4. Pour 1 litre of water inside the salt container and then fill with salt
5. Fill the rinse aid dispenser.
Setting the water softener
The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.
The higher the content of these salts, the harder your water is. Water hardness is measured in equivalent scales, German degrees,
French degrees and mmol/l (millimol per litre). The softener should be adjusted according to the hardness of the water
in your area. Your local Water Authority can advise you on the hardness of the water in your area.
The water softener must be set in both ways: manually, using the water hardness switch and electronically, using the function push buttons on the control panel.
Adjusting the water
hardness setting
10
9 8 7 6
yes yes yes yes yes
3 yes
1
no
Manually
Electronically
2
1
Use of salt
2 yes
Water hardness
51 - 70 43 - 50 37 - 42 29 - 36 23 - 28
9,0 - 12,5 7,6 - 8,9 6,5 - 7,5 5,1 - 6,4 4,0 - 5,0
IV
11 - 14 1,9 - 2,5 II
< 4 < 0,7 I
4 - 10 0,7 - 1,8 I/II
19 - 22 15 - 18
3,3 - 3,9 2,6 - 3,2
III
5 4
yes yes
10
9 8 7 6
3
1
Level
indicated in
the display
2
5 4
°dH
(german de-
grees)
91 - 125 76 - 90 65 - 75 51 - 64 40 - 50
19 - 25
< 7
7 - 18
33 - 39 26 - 32
°TH
(french degrees)
mmol/l
(millimol per litre, inter-
national unit for the
hardness of water)
Range
152963991en per CH.qxp 03/08/2004 13.38 Pagina 13
Operating instructions
14
a) Setting manually
1. Open the dishwasher door.
2. Remove the lower basket from the dishwasher.
3. Turn the water hardness switch to
position 1 or 2 (see table).
4. Replace the lower basket. The dishwasher is factory set at
position 2.
b) Setting electronically
The dishwasher is factory set at level 5.
With the help of the table, set the level corresponding to hardness of the water in your area.
1. Press OPTION button
2. Press DIRECTION buttons until SETTINGS... is displayed
3. Press OK START button
4. Press DIRECTION buttons until WATER HARDNESS is displayed
3. Press OK START button
4. Press DIRECTION buttons until the level corresponding to hardness
of water in your area is displayed.
5. Press OK START button to confirm the setting
6. Press OPTION button to exit the Options menu.
152963991en per CH.qxp 03/08/2004 13.38 Pagina 14
AA07
Loading...
+ 30 hidden pages