AEG CXT9000, EXT9000, CXT9000EG User Manual
INSTALLATION AND OPERATING INSTRUCTIONS
X GB
Mod.
X GB
GENERAL INFORMATION
ENVIRONMENTAL NOTES
Disposal of packaging materials
Do not dispose of packaging materials with normal household
waste. These materials are recyclable and should be sorted
(e.g. cardboard, plastic sheeting, polystyrene) and disposed
of in accordance with local regulations.
The only proper use of this appliance is that for which it
was expressly designed, as a cooking appliance.
This product meets the requirements of E.E.C. rules:
- 73/23 E.E.C. "regarding Low Tension"
- 89/336 E.E.C. "regarding electromagnetic disturbances"
- 89/109 E.E.C. "regarding materials in contact with food"
- 90/396/EEC regarding Gas appliances
Important!
This new appliance is easy to use. Nevertheless, to obtain
the best results, it is important to read this manual carefully
and follow all the instructions before using it for the first
time.
The manual provides correct instructions on its installation,
use and maintenance as well as giving useful advice.
The Guarantee
Your new appliance is covered by a guarantee.
You will find the related Guarantee certificate attached. If it is
missing, ask the Retailer for it, indicating the purchase date, model
and serial number that are printed on the label identifying the
appliance (located in the upper panel of the oven).
Keep the smaller part of the certificate itself and show it if needed
to the Technical Assistance Service staff along with the sales
receipt or accompanying invoice. If this procedure is not respected,
the technician will be required to charge for any eventual repairs.
For hygiene and safety reasons, this appliance must always be
kept clean (see instructions). This product was created to cook
food and must not be used for other purposes. Do not cover the
oven walls with aluminium foil, particularly the lower part of the
cabinet itself. Before performing maintenance or cleaning,
disconnect the appliance and let it cool. Make sure that the oven
grills are correctly in place. In case of repairs, do not attempt to
fix it yourself. Repairs carried out by non-specialised persons may
cause damage. Contact the nearest Assistance Centre and use
only original replacement parts.
CAUTION
The appliance may become very hot during use. Please
avoid touching the heating elements inside the oven.
The oven surfaces may get very hot when the grill is in
use.
Keep children well away
Warnings for built-in ovens
It is very important that this instruction manual be kept
together with the appliance for future consultation. If the
appliance is sold or given to another person, make sure
that the manual is provided along with it so that the new
user understands how to use the machine and the related
warnings. These warnings were written for your safety
and that of others. Therefore, we ask you to read them
carefully before installing and using the appliance.
This appliance was intended for use by adults. Therefore, pay
attention that children do not play around it. Any eventual changes
to the built-in appliance that are required to install the appliance
must only be performed by specialised staff. For eventual
interventions, call an authorized Technical Assistance Centre and
use original replacement parts. It is dangerous to change or attempt
to change the features of this appliance. Always insert the driptray when using the grill or cooking meat on the grill. Pour a little
water into the drip-tray so that the burning fat does not produce
an unpleasant odour.
Always use oven gloves to remove food from the oven. The ovens
remain hot for a long time after they are turned off. Watch children
the entire time the oven is in use, making sure that they do not
touch the surfaces and that they do not come near the appliance
while in use or if it has not completely cooled. Be careful when
using spray cleaning products. Never spray the filter (if the appliance
has one) and the thermostat bulb.
Make sure that the knobs are on 0 (closed) when the
appliance is not in use.
2
X GB
INDEX
Technical features .............................................................................................................................................................................page 3
Installation........................................................................................................................................................................................page 3
Gas connection .................................................................................................................................................................................page 3
Electrical connection .........................................................................................................................................................................page 4
Preparation on the cabinet ................................................................................................................................................................page 4
Gas regulation ...................................................................................................................................................................................page 6
Use ....................................................................................................................................................................................................page 8
Using the turnspit ..............................................................................................................................................................................page 9
Minutes counters .............................................................................................................................................................................page 10
Cleaning and maintenance..............................................................................................................................................................page 10
Servicing Informations..................................................................................................................................................................page 10
Technical features:
Dimensions: Height cm 59,7
(appliance) Width cm 89,5
Power: Grill burner W 3600
Electric grill W 2800
Voltage (50 / 60) Hz single phase) V 220-230
Depth cm 54
Oven burner W 3800
Cooling fan motor W 22
Lamp (miniature Ediso screw high temeprature 300 °C) W 15 or 25
INSTALLATIONS
IMPORTANT: The gas and electricity connections and any adjustments must be made by specialised staff.
The manufacturer declines all responsibility for any type of damage caused by failure to comply with the regulations in
force or negligent installation of the appliance.
GAS CONNECTION
The connection to the mains gas supply or the gas cylinder must
be made in accordance with the installation norms in force.
Remember that this appliance may only be installed and used in
rooms permanently ventilated in accordance with the norms in
force.
In other words, the rooms must have openings on outside walls
or suitable ducts which allow correct natural or forced ventilation,
permanently ensuring adequate intake of the air necessary for
proper combustion and the discharge of stale air. If this is the
only gas appliance in the room, a hood must be placed above it
for natural, direct removal of stale air, with a straight vertical flue
of length at least twice its diameter, with a minimum cross-section
of at least 100 cm
To allow the indispensable intake of fresh air into the room, a
suitable opening of at least 100 cm
2
.
2
leading directly outdoors
must be provided close to floor level, so that it cannot be obstructed
from the inside or outside of the wall and does not impede proper
burner combustion or the regular elimination of stale air; it must
be at least 180 cm below the level of the discharge opening.
In all other cases (i.e. when there are other gas appliances in the
same room or direct natural ventilation is not possible and indirect
natural ventilation or forced ventilation has to be provided) call in
a qualified specialist, who will install the appliance and construct
the necessary ventilation system in strict accordance with the
requirements of the norms in force.
Pressure regulators for LPG must comply with the norms in force.
Provide a stop tap between the gas supply and the appliance
(accessible with the appliance installed).
Make the connection directly to the 1/2" elbow on the gas hose,
using rigid connection pipes in accordance with the norms in
force, such as copper or lead iron, or using continuous-wall steel
hoses.
Avoid tight bends and take care not to crush the hose.
In addition, pipes must not apply stresses of any kind to the
appliance.
Check that the connection is airtight using soapy water.
3
Loading...