AEG EWF 167583 W User Manual [de]
user manual
benutzerinformation
Washing Machine
Waschmaschine
Steam System
EWF 167583 W
2 electrolux
Electrolux. Thinking of you.
Share more of our thinking at www.electrolux.com
CONTENTS
Safety information 2
Product description 4
Control panel 5
Personalisation 7
First use 7
Daily use 8
Helpful hints and tips 11
Washing programmes 12
SAFETY INFORMATION
Important! Read carefully & keep for future
reference.
• The safety of Your appliance complies
with the industry standards and with legal
requirements on the safety of appliances.
However, as manufacturers, we feel it is
our duty to provide the following safety
notes.
• It is most important that this instruction
book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another
owner, or should you move house and
leave the appliance, always ensure that
the book is supplied with the appliance in
order that the new owner can get to
know the functioning of the appliance
and the relevant warnings.
• You MUST read them carefully before installing or using the appliance.
• Before first starting up, check the appliance for any damage incurred during
transport. Never connect up a damaged
appliance . If parts are damaged, contact
your supplier.
• If the appliance is delivered in the winter
months when there are minus temperatures. Store it at room temperature for 24
hours before using for the first time.
INSTALLATION
• This appliance is heavy. Care should be
taken when moving it.
• When unpacking the appliance, check
that it is not damaged. If in doubt, do not
use it and contact the Service Centre.
Care and cleaning 15
What to do if… 18
Technical data 20
Consumption values 21
Installation 21
Electrical connection 24
Environment concerns 24
Subject to change without notice
• All packing and transit bolts must be removed before use. Serious damage can
occur to the product and to property if
this is not adhered to. See relevant section in the user manual.
• After having installed the appliance,
check that it is not standing on the inlet
and drain hose and the worktop is not
pressing the electrical supply cable
against the wall.
• If the machine is situated on a carpeted
floor, please adjust the feet in order to allow air to circulate freely under the appliance.
• Always be sure, that there is no water
leakage from hoses and their connections after the installation.
• If the appliance is installed in a location
subject to frost, please read the “dangers
of freezing” chapter.
• Any plumbing work required to install this
appliance should be carried out by a
qualified plumber or competent person.
• Any electrical work required to install this
appliance should be carried out by a
qualified electrician or competent person.
GENERAL SAFETY
• It is dangerous to alter the specifications
or attempt to modify this product in any
way.
• During high temperature wash programmes and steam programmes the
door glass may get hot. Do not touch it!
electrolux 3
• Make sure that small pets do not climb
into the drum. To avoid this, please
check into the drum before using.
• Any objects such as coins, safety pins,
nails, screws, stones or any other hard,
sharp material can cause extensive damage and must not be placed into the machine.
• Only use the advised quantities of fabric
softener and detergent. Damage to the
fabric can ensue if you over-fill. Refer to
the manufacturer’s recommendations of
quantities.
• Wash small items such as socks, laces,
washable belts etc in a washing bag or
pillow case as it is possible for such
items to slip down between the tub and
the inner drum.
• Do not use your washing machine to
wash articles with whalebones, material
without hems or torn material.
• Always unplug the appliance and turn off
the water supply after use, cleaning and
maintenance.
• Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced people
may cause injury or serious malfunctioning. Contact your local Service Centre.
Always insist on genuine spare parts.
USE
• This appliance is designed for washing
and steam treatment of standard laundry
in domestic applications. It must not be
used for purposes other than those for
which it was designed.
• Only wash fabrics which are designed to
be machine washed. Follow the instructions on each garment label.
• Do not overload the appliance. See the
Washing Programme Table.
• Before washing, ensure that all pockets
are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink,
rust, and grass before washing. Underwired bras must NOT be machine washed.
• Garments which have been in contact
with volatile petroleum products should
not be machine washed. If volatile clean-
ing fluids are used, care should be taken
to ensure that the fluid is removed from
the garment before placing in the machine.
• Never pull the power supply cable to remove the plug from the socket; always
take hold of the plug itself.
• Never use the appliance if the power
supply cable, the control panel, the working surface or the base are damaged so
that the inside of the washing machine is
accessible.
CHILD SAFETY
• This appliance is not intended for use by
person (including children) with reduced
physical sensory or mental capabilities or
lack of experience and knowledge unless
they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure
that they do not play with the appliance.
• The packaging components (e.g. plastic
film, polystyrene) can be dangerous to
children - danger of suffocation! Keep
them out of children’s reach.
• Keep all detergents in a safe place out of
children’s reach.
• Make sure that children or pets do not
climb into the drum. To prevent children
and pets becoming trapped inside the
drum the machine incorporates a special
feature. To activate this device, rotate the
button (without pressing it) inside the
door clockwise until the groove is horizontal. If necessary use a coin.
To disable this device and restore the
possibility of closing the door, rotate the
button counterclockwise until the groove
is vertical.
4 electrolux
PRODUCT DESCRIPTION
Your new appliance meets all modern requirements for effective treatment of laundry
with low water, energy and detergent consumption. Its new washing system allows total use of detergent and reduces water consumption so saving energy.
The STEAM System allows you to reduce creases and odours from dried laundry with
different steam programmes depending on the fabric type.
1
2
3
4
5
6
Detergent dispenser drawer
1
Control panel
2
Door opening handle
3
DETERGENT DISPENSER DRAWER
Compartment for detergent used for
prewash and soak phase or for stain remover used during the stain action phase (if
available). The prewash and soak detergent
is added at the beginning of the wash programme. The stain remover is added during the stain action phase.
Compartment for powder or liquid detergent used for main wash. If using liquid
detergent pour it just before starting the
programme.
Compartment for liquid additives (fabric
softener, starch).
Follow the product manufacturer’s recommendations on quantities to use and do not
exceed the «MAX» mark in the detergent
dispenser drawer. Any fabric softener or
starching additives must be poured into the
compartment before starting the wash programme.
Rating Plate
4
Drain pump
5
Adjustable feet
6
CONTROL PANEL
Below is a picture of the control panel. It shows the programme selector dial as well as
the buttons, pilot lights and the display. These are presented by relevant numbers on
the following pages.
1 2 3 4 5 6 7 8 9
electrolux 5
Programme selector dial
1
Display
2
TEMPERATURE button
3
SPIN reduction button
4
PREWASH button
5
EXTRA RINSE button
6
DELAY START button
7
START/PAUSE button
8
TIME MANAGER buttons
9
PROGRAMME SELECTOR DIAL
It allows you to switch the appliance on/off
and/or to select a programme.
TEMPERATURE
This button allows you to increase or decrease the washing temperature.
SPIN REDUCTION
By pressing this button you can change the
spin speed of the selected programme.
PREWASH
By selecting this option the machine performs a prewash cycle before the main
wash phase. The washing time will be prolonged. This option is recommended for
heavily soiled laundry.
EXTRA RINSE
This appliance is designed to save energy.
If it necessary to rinse the laundry using an
extra quantity of water (extra rinse), select
this option. Some additional rinses will be
performed. This option is recommended for
people who are allergic to detergents, and
in areas where the water is very soft.
DELAY START
The programme can be delayed from 30
min - 60 min - 90 min, 2 hours and then by
1 hour up to a maximum of 20 hours by
means of this button.
START PAUSE
This button allows you to start or to interrupt the selected programme.
TIME MANAGER
These buttons allows you to modify the
programme duration automatically proposed by the appliance.
6 electrolux
DISPLAY
2.12 2.11 2.10
2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9
The display shows the following information:
2.1:Temperature value
2.2: Temperature icons
, Cold .
During the washing cycle the display shows
the temperature icon animated to indicate
that the appliance has started the heating
phase of the water in the tub.
2.3: Spin value
2.4: Spin speed icons.
•
No spin
•
Rinse Hold
•
Night Cycle
During the spinning phase the spiral is animated.
No spin option eliminates all the spin phases and increases the number of rinses for
some programmes.
Rinse Hold: by selecting this option the
water of the last rinse is not emptied out to
prevent the fabrics from creasing. When the
programme has finished the display shows
flashing
, the icon 2.8 is still visual-
ized, the light of button 8 is off and the door
is locked to indicate that the water must be
emptied out. To empty out the water,
please read the paragraph «At the end of
the programme».
Night Cycle: by selecting this option, the
machine will not drain the water of the last
rinse, so as not to wrinkle the laundry. As all
spinning phases are suppressed, this
washing cycle is very noiseless and it can
be selected at night or in times with a more
economical power rate. On some programmes the rinses will be performed with
more water. When the programme has fin-
ished, the display shows flashing
,
the icon 2.8 is still visualized, the light of
button 8 is off and the door is locked to indicate that the water must be emptied out.
To empty out the water, please read the
paragraph «At the end of the programme».
2.5: Option icons: Extra Rinse
Iron
.
or Easy
2.6: Delay icon
The selected delay set by pressing the relevant button appears on the display for a
few seconds, then the duration of the previously selected programme is displayed. The
relevant icon is lighted on. The delay time
value decreases by one unit every hour and
then, when 1 hour remains, the time decreases every minute.
2.7: Child safety lock
(see «Personali-
sation» chapter).
2.8: Door locked icon
After you have pressed button 8 and the
machine has started, this icon is lighted on
and only the phase running icon stays on.
When the programme has finished, three
flashing zeros (
) are displayed and
this icon disappears.
2.9:
• Duration of the selected programme
After selecting a programme, the duration
is displayed in hours and minutes (for example
). The duration is calculated
automatically on the basis of the maximum recommended load for each type of
fabric. After the programme has started,
the time remaining is updated every minute.
End of programme
•
When the programme has finished three
flashing zeros (
) are displayed, the
icon 2.8 disappears and the door can be
opened.
Incorrect option selection
•
If an option which is not compatible with
the set wash programme is selected, the
message Err is displayed at the bottom
of the display for a few seconds and the
integrated red light of button 8 start flashing.
Alarm codes
•
electrolux 7
In the event of operating problems, some
alarm codes can be displayed, for exam-
ple
(see paragraph «What to do
if...»).
Delay Time value
•
2.10: Soil degree icons
•
Intensive
•
Normal
•
Daily
•
Light
•
Quick
•
Super Quick
•
Refresh
•
Super Refresh
(see paragraph «Select Time Manager option»).
2.11: Clock icon
TABLE OF SYMBOLS
Programme selector dial
= Time Manager Programmes
= Rinses
= Drain
= Spin
= Steam Programmes
After the programme has started, the duration is displayed and the clock icon is animated.
2.12: Washing programme phase icons
By selecting the wash programme, the
washing programme phase icons corresponding to the various phases making up
the programme are shown in the upper part
of the display. After having pressed button
8 only the icon of the running phase stays
on:
•
Prewash
(this icon lights on when the
relevant option button is selected as well)
•
Wash
•
Rinses
•
Drain
•
Spin
Options buttons and lights
= Child Lock
= Time Manager buttons
+ / -
PERSONALISATION
ACOUSTIC SIGNALS
The machine is provided with an acoustic
device, which sounds in the following cases:
• at the end of the cycle
• if there is a fault.
By pressing the 5 and 6 buttons simultaneously for about 6 seconds, the acoustic
signal is deactivated (except if there is a
fault). By pressing these 2 buttons again,
the acoustic signal is reactivated.
CHILD SAFETY LOCK
This device permits you to leave the appliance unattended and not to worry that chil-
FIRST USE
• Ensure that the electrical and water
connections comply with the installation instructions.
dren might be injured by or cause damage
to the appliance. This function remains enabled also when the washing machine is not
working.
There are two different ways to set this option:
1. Before pressing button 8: it will be im-
possible to start the machine.
2. After pressing button 8: it will be im-
possible to change any other pro-
gramme or option.
To enable or disable this option press simultaneously for about 6 seconds buttons
6 and 7 until on the display, the icon
ap-
pears or disappears.
• Remove the polystyrene block and
any material from the drum.
8 electrolux
• Before the first wash, run a cotton
cycle at the highest temperature
without any laundry in the machine,
to remove any manufacturing residue
DAILY USE
Load the laundry
Open the door by carefully pulling the door
handle outwards. Place the laundry in the
drum, one item at a time, shaking them out
as much as possible. Close the door.
Make sure that no laundry stays between
the seal and the door. There is a risk of water leakage or damage to the laundry.
Measure out the detergent and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required, pour it into the main wash compartment
if the selected programme/option it requires
(see more details in «Detergent dispenser
drawer»).
If required, pour fabric softener into the
compartment marked
must not exceed the «MAX» mark in the
drawer). Close the drawer gently.
or in the appropriate compartment
(the amount used
from the drum and tub. Pour 1/2 a
measure of detergent into the main
wash compartment and start the
machine.
SELECT THE REQUIRED PROGRAMME
BY TURNING THE PROGRAMME
SELECTOR DIAL (1)
Turn the programme selector dial to the required programme. The washing machine
will propose a temperature and automatically select the maximum spin value provided for the programme you have chosen.
You can change these values by operating
the corresponding buttons. The green pilot
light of the button 8 starts to flash.
The selector dial can be turned either clockwise or counterclockwise. Turn to position
to reset programme/Switching the ma-
chine off.
At the end of the programme the selector dial must be turned to position
to switch the machine off.
Caution! If you turn the programme
selector dial to another programme
when the machine is working, the red
pilot light of button 8 will blink 3 times
and the message Err is displayed to
indicate a wrong selection. The
machine will not perform the new
selected programme.
SELECT THE TEMPERATURE BY
PRESSING BUTTON 3
By selecting a programme, the appliance
proposes automatically a default temperature.
,
electrolux 9
Press this button repeatedly to increase or
decrease the temperature, if you want your
laundry to be washed at a different temperature.
REDUCE THE SPIN SPEED BY
PRESSING BUTTON 4
By selecting a programme, the appliance
proposes automatically the maximum spin
speed provided for that programme.
Press button 4 repeatedly to change the
spin speed, if you want your laundry to be
spun at a different speed.
SELECT THE AVAILABLE OPTIONS BY
PRESSING BUTTONS 4, 5 AND 6
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired programme and before pressing button 8.
When these buttons are pressed, the corresponding icons appear on the display.
When they are pressed again, the icons
disappear. If an incorrect option is selected,
the integrated red pilot light of the button 8
flashes for 3 times and the Err message
appears on the display for a few seconds.
For the compatibility among the washing programmes and the options see
chapter «Washing Programmes».
SELECT THE DELAY START BY
PRESSING BUTTON 7
Before you start the programme, if you wish
to delay the start, press the button 7 repeatedly, to select the desired delay. The
corresponding icon 2.6 will appear on the
display in the upper part of the display.
The selected delay time value (up to 20
hours) will appear on the display a few seconds, then the duration of the programme
will appear again.
You must select this option after you have
set the programme and before you press
button 8.
You can cancel or modify the delay time at
any moment, before you press button 8.
Selecting the delayed start:
1. Select the programme and the required
options.
2. Select the delay start by pressing the
button 7.
3. Press button 8:
– the machine starts its hourly count-
down.
– The programme will start after the
selected delay has expired.
Cancelling the delayed start after having
pressed button 8:
1. Set the washing machine to PAUSE by
pressing button 8.
2.
Press button 7 once until the symbol
’ is displayed
3. Press button 8 again to start the pro-
gramme.
Important! The selected delay can be
changed only after selecting the washing
programme again.
The Delay Start can not be selected with
DRAIN programme.
START THE PROGRAMME BY
PRESSING BUTTON 8
To start the selected programme, press the
button 8, the green pilot light of the button
8 stops blinking. The icon 2.8 appears on
the display to indicate that the appliance
starts operating and the door is locked.
To interrupt a programme which is running,
press the button 8: the green pilot light
starts to blink.
To restart the programme from the point at
which it was interrupted, press the button 8
again. If you have chosen a delayed start,
the machine will begin the countdown.
If an incorrect option is selected, the red pilot light of the button 8 blinks for 3 times
the message Err is displayed for few seconds.
SELECT THE TIME MANAGER OPTION
BY PRESSING BUTTONS 9
By pressing these buttons repeatedly, the
duration of the washing cycle can be increased or decreased. The icon 2.10 will
appear on the display to indicate the chosen degree of soil. This option is available
only with Cotton, Synthetic and Delicate
programmes.
Soil Level Icon Type of fabric
Intensive For heavy soiled
items
10 electrolux
Soil Level Icon Type of fabric
Normal For normal soiled
Daily For daily soiled
Light For slightly soiled
Quick For very slightly
Super Quick
1)
1)
Refresh
Super Re-
1)
fresh
1) We recommend you to reduce the load sizes (see
Washing programmes table).
2) When you select this option the relevant icon appears
just for a while and then it disappears immediately.
items
items
items
soiled items
For items used or
worn for a short time
2)
For refreshing items
only
2)
For refreshing a very
few items only
ALTERING AN OPTION OR A RUNNING
PROGRAMME
It is possible to change some options before the programme carries them out .
Before you make any change, you must
PAUSE the appliance by pressing the button 8 (if you wish to change the Time Manager option, you must cancel the running
programme and make your selection
again).
Changing a running programme is possible
only by resetting it. Turn the programme selector dial to
and then to the new pro-
gramme position. Start the new programme
by pressing the button 8 again. The washing water in the tub will be not emptied out.
INTERRUPTING A PROGRAMME
Press the button 8 to interrupt a programme which is running, the corresponding green pilot light starts blinking.
Press the button again to restart the programme.
CANCELLING A PROGRAMME
Turn the selector dial to
to cancel a programme which is running.
You can select now a new programme.
OPENING THE DOOR
After the programme has started (or during
the delay time) the door is locked, if you
need to open it, set first the machine to
PAUSE by pressing the button 8.
If the icon 2.8 disappears after some minutes, the door can be opened.
If the icon 2.8 does not go off, this means
that the machine is already heating or that
the water level is too high. Do not try to
force the door!
If you cannot open the door but you need
to open it you have to switch the machine
off by turning the selector dial to
. After a
few minutes the door can be opened (pay
attention to the water level and temperature!).
After closing the door, it is necessary to select the programme and options again and
to press button 8.
AT THE END OF THE PROGRAMME
The machine stops automatically. Three
blinking zeros (
) appear on the dis-
play.
The pilot light of button 8 goes off. Some
acoustic signals sound for a few minutes.
If a programme or an option that ends with
water left in the tub has been set, the icon
2.8 remains displayed to indicate that the
water must be emptied out before opening
the door.
The drum continues to run at regular intervals until the water draining.
Follow the below instructions to empty out
the water:
1.
Turn the programme selector dial to
.
2. Select the draining or spinning programme.
3. Reduce the spin speed if needed, by
pressing the relevant button.
4. Press button 8.
At the end of the programme, the icon 2.8
disappears and the door can be opened.
Turn the programme selector dial to
to
switch the machine off.
Remove the laundry from the drum and
carefully check that the drum is empty. If
you do not intend to carry out another
wash, close the water tap. Leave the door
open to prevent the formation of mildew
and unpleasant smells.
electrolux 11
Stand by : once the programme has finished after a few minutes the energy saving
system will be enabled. The brightness of
HELPFUL HINTS AND TIPS
SORTING OUT THE LAUNDRY
Follow the wash code symbols on each
garment label and the manufacturer’s
washing instructions. Sort the laundry as
follows: whites, coloureds, synthetics, delicates, woollens.
BEFORE LOADING THE LAUNDRY
Never wash whites and coloureds together.
Whites may lose their «whiteness» in the
wash.
New coloured items may run in the first
wash; they should therefore be washed
separately the first time.
Button up pillowcases, close zip fasteners,
hooks and poppers. Tie any belts or long
tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special
detergent or detergent paste.
Treat curtains with special care. Remove
hooks or tie them up in a bag or net.
REMOVING STAINS
Stubborn stains may not be removed by
just water and detergent. It is therefore advisable to treat them prior to washing.
Blood: treat fresh stains with cold water.
For dried stains, soak overnight in water
with a special detergent then rub in the
soap and water.
Oil based paint: moisten with benzine
stain remover, lay the garment on a soft
cloth and dab the stain; treat several times.
Dried grease stains: moisten with turpentine, lay the garment on a soft surface and
dab the stain with the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a
rust removing product used cold. Be careful
with rust stains which are not recent since
the cellulose structure will already have
been damaged and the fabric tends to hole.
Mould stains: treat with bleach, rinse well
(whites and fast coloureds only).
1) do not use acetone on artificial silk
the display is reduced. By pressing any button the appliance will come out of the energy saving status.
Grass: soap lightly and treat with bleach
(whites and fast coloureds only).
Ball point pen and glue: moisten with
1)
acetone
, lay the garment on a soft cloth
and dab the stain.
Lipstick: moisten with acetone as above,
then treat stains with methylated spirits.
Treat any residual marks with bleach.
Red wine: soak in water and detergent,
rinse and treat with acetic or citric acid,
then rinse. Treat any residual marks with
bleach.
Ink: depending on the type of ink, moisten
1)
the fabric first with acetone
, then with
acetic acid; treat any residual marks on
white fabrics with bleach and then rinse
thoroughly.
Tar stains: first treat with stain remover,
methylated spirits or benzine, then rub with
detergent paste.
DETERGENTS AND ADDITIVES
Good washing results also depend on the
choice of detergent and use of the correct
quantities to avoid waste and protect the
environment.
Although biodegradable, detergents contain
substances which, in large quantities, can
upset the delicate balance of nature.
The choice of detergent will depend on the
type of fabric (delicates, woollens, cottons,
etc.), the colour, washing temperature and
degree of soiling.
All commonly available washing machine
detergents may be used in this appliance:
• powder detergents for all types of fabric
• powder detergents for delicate fabrics
(60°C max) and woollens
• liquid detergents, preferably for low tem-
perature wash programmes (60°C max)
for all types of fabric, or special for wool-
lens only.
The detergent and any additives must be
placed in the appropriate compartments of
the dispenser drawer before starting the
wash programme.
12 electrolux
If using liquid detergents, a programme
without prewash must be selected.
Your appliance incorporates a recirculation
system which allows an optimal use of the
concentrated detergent.
Follow the product manufacturer’s recommendations on quantities to use and do
not exceed the «MAX» mark in the detergent dispenser drawer.
QUANTITY OF DETERGENT TO BE
USED
The type and quantity of detergent will depend on the type of fabric, load size, degree of soiling and hardness of the water
used.
Follow the product manufacturers’ instructions on quantities to use.
WASHING PROGRAMMES
STEAM FUNCTION
Steam can reduce creases and odours depending of the type of textile.
Maximum amount of laundry : 1 kg of dried
laundry.
As at the end of each Steam cycle the laundry feel humid, it is better to expose clothes
Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed Maximum Fabrics Load - Type of Laundry
COTTONS
Katoen/Coton
90° - Cold
Main wash - Rinses
Spin at the maximum speed
Max. load 7 kg - Reduced load 3.5 kg
White and coloured cotton (normally soiled items).
SYNTHETICS
Synthetica/Synthétiques
60° - Cold
Main wash - Rinses
Maximum spin speed at 900 rpm
Max. load 3.5 kg - Reduced load 2 kg
Synthetic or mixed fabrics: underwear, coloured
garments, non-shrink shirts, blouses.
DELICATES
Fijne was/Délicats
40° - Cold
Main wash - Rinses
Maximum spin speed at 700 rpm
Max. load 3.5 kg - Reduced load 2 kg
Delicate fabrics: acrylics, viscose, polyester.
Use less detergent if:
• you are washing a small load
• the laundry is lightly soiled
• large amounts of foam form during wash-
ing.
DEGREES OF WATER HARDNESS
Water hardness is classified in so-called
“degrees” of hardness. Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority. If the water hardness degree is medium or high we
suggest you to add a water softener following always the manufacturer’s instructions.
When the degree of hardness is soft, readjust the quantity of the detergent.
to the open air for about 10 minutes to let
the humidity go away. Laundry should be
removed from the drum as quick as possible.
After a steam cycle, clothes may to be ironed anyway, but with less effort!
Options
SPIN REDUCTION
RINSE HOLD
PREWASH
EXTRA RINSE
TIME MANAGER
SPIN REDUCTION
RINSE HOLD
PREWASH
EXTRA RINSE
TIME MANAGER
RINSE HOLD
PREWASH
EXTRA RINSE
TIME MANAGER
1)
1)
1)
2)
2)
2)
Detergent
Compart-
ment
electrolux 13
Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed Maximum Fabrics Load - Type of Laundry
WOOL/HANDWASH
Wol/Laine
Handwas/Lavage à la main
40° - Cold
Main wash - Rinses
Maximum spin speed at 900 rpm
Max. load 2 kg
Washing programme for machine washable wool as
well as for hand washable woollens and delicate fabrics with «hand washing» care symbol.
A single or bulky item may cause imbalance. If
the appliance doesn’t perform the final spin
phase, add more items, redistribute the load
manually and then select the spinning programme.
RINSE
Rinse - Long spin
Spin at the maximum speed
Max. load 7 kg
With this programme it is possible to rinse and spin
cotton garments which have been washed by hand.
To intensify the rinsing action, select the option EXTRA RINSE. The appliance will add some additional
rinses.
DRAIN
Draining of water
Max. load 7 kg
For emptying out the water of the last rinse in programmes with the option selected, which ends with
water left in the tub.
SPIN
Drain and long spin
Spin at the maximum speed
Max. load 7 kg
Separate spin for hand washed garments and after
programmes with the option selected, which ends
with water left in the tub. You can choose the spin
speed by pressing the relevant button to adapt it to
the fabrics to be spun.
COTTON ECONOMY
Katoen eco/Coton Eco
90° - 40°
Main wash - Rinses
Spin at the maximum speed
Max. load 7 kg
White and fast coloured cotton.
This programme can be selected for slightly or normally soiled cotton items. The temperature will decrease and the washing time will be extended. This allows to obtain a good washing efficiency so saving
energy.
Options
Compart-
ment
SPIN REDUCTION
RINSE HOLD
SPIN REDUCTION
RINSE HOLD
EXTRA RINSE
SPIN REDUCTION
SPIN REDUCTION
Detergent
RINSE HOLD
PREWASH
1)
EXTRA RINSE
14 electrolux
Programme - Maximum and Minimum Temperature - Cycle Description - Maximum Spin Speed Maximum Fabrics Load - Type of Laundry
BLANKET
Options
Detergent
Compart-
ment
Dekens/Couette
40° - 30°
Main wash - Rinses
Maximum spin speed at 700 rpm
Max. load 2.5 kg
For a single washable synthetic blanket or duvet.
5 SHIRTS
SPIN REDUCTION
5 Overhemden/5 Chemises
30°
Main wash - Rinses
Maximum spin speed at 900 rpm
Max. load 1 kg
Washing cycle for slightly soiled shirts.
EASY IRON
Antikreuk/Repassage facile
60° - Cold
Main wash - Rinses
Maximum spin speed at 900 rpm
SPIN REDUCTION
RINSE HOLD
PREWASH
1)
EXTRA RINSE
Max. load 1 kg
Selecting this programme the laundry is gently washed and spun to avoid any creasing. In this way ironing
is easier. Furthermore the machine will perform additional rinses.
O = OFF
For cancelling the programme which is running or to
switch the machine off .
1) If using liquid detergents, a programme without PREWASH must be selected.
2) If you select the Super Quick option by pressing the buttons 10, we recommend that you reduce the maximum
load as indicated in this chart. Full loading is possible however with somewhat reduced cleaning results. If you
select the Refresh or Super Refresh option, we recommend that you reduce the load even more.
STEAM PROGRAMMES for dried laundry
1)
Duration Load
Cycle description
COTTONS
30 minutes up to 1 Kg
Katoen/Coton
This cycle reduces creases and folders in 1-4 cotton
shirts (100% cotton fibres) or linen, one pair of jeans.
SYNTHETICS
20 minutes up to 1 Kg
Synthetica/Synthétiques
This cycle reduces creases in 1-5 synthetic shirts or 1
kg of mixed fabrics in different percentage and up to 1
kg of 100% synthetic fibres. It is also possible to use
silk and wool.
FRESHEN-UP
25 minutes up to 1 Kg
Opfrissen/Rafraîchir
This cycle removes odour from cotton and synthetic
clothes. Steam does not remove animal or human
2)
odours.
electrolux 15
STEAM PROGRAMMES for dried laundry
Do not use any detergent. If necessary, remove stains by washing or using localized
stain removal.
Steam programmes do not perform any hygienic cycle.
1) All information on applications is for guidance only. Smoothing results may vary depending on the
selected programme and especially on the fittings and material properties of the textile. If necessary,
the results can be improved by using different programmes and steam volumes.
2) It is not possible to put in a Steam cycle the following type of clothes:
• clothes which is not specified on the care label as being suitable for tumble-drying
• all garments with lot inclusion of plastic's metal, wooden parts or alike.
Cycle description
1)
Duration Load
CARE AND CLEANING
Warning! You must disconnect the
appliance from the electricity supply,
before you can carry out any cleaning
or maintenance work.
DESCALING
The water we use normally contains lime. It
is a good idea to periodically use a water
softening powder in the machine. Do this
separately from any laundry washing, and
according to the softening powder manufacturer's instructions. This will help to prevent the formation of lime deposits.
AFTER EACH WASH
Leave the door open for a while. This helps
to prevent mould and stagnant smells forming inside the appliance. Keeping the door
open after a wash will also help to preserve
the door seal.
Important! Do not use methylated spirits,
solvents or similar products to clean the
cabinet.
CLEANING THE DISPENSER DRAWER
The detergent dispenser drawer should be
cleaned regularly.
The washing powder and additive dispenser drawer should be cleaned regularly.
Remove the drawer by pressing the catch
downwards and by pulling it out.
1
2
MAINTENANCE WASH
With the use of low temperature washes it
is possible to get a build up of residues inside the drum.
We recommend that a maintenance wash
be performed on a regular basis.
To run a maintenance wash:
• The drum should be empty of laundry.
• Select the hottest cotton wash pro-
gramme.
• Use a normal measure of detergent,
must be a powder with biological properties.
EXTERNAL CLEANING
Clean the exterior cabinet of the appliance
with soap and water only, and then dry
thoroughly.
Flush it out under a tap, to remove any
traces of accumulated powder.
To aid cleaning, the top part of the additive
compartment should be removed. Clean all
parts with water.
16 electrolux
Clean the chamber of dispenser drawer
with a brush.
WASHING DRUM
Rust deposits in the drum may occur due
to rusting foreign bodies in the washing or
tap water containing iron.
Important! Do not clean the drum with
acidic descaling agents, scouring agents
containing chlorine or iron or steel wool.
1. Remove any rust deposits on the drum
with a cleaning agent for stainless steel.
2. Run a washing cycle without any wash-
ing to clean off any cleaning agent residues.
Programme: Short Cotton Programme
at maximum temperature and add approx. 1/4 measuring cup of detergent.
DRAIN PUMP
Regularly examine the drain pump and
make sure that it is clean.
Clean the pump regularly and/or if:
• The appliance does not drain the water.
• The drum cannot turn.
• The appliance makes an unusual noise
because of the blockage of the drain
pump.
• A problem with water draining is detected
(see chapter “What to do if...” for more
details).
Warning!
1. Disconnect the mains plug from
the mains socket.
2. Do not remove the filter while the
appliance operates. Do not clean
the drain pump if the water in the
appliance is hot. The water must
be cold before you clean the drain
pump.
To clean the drain pump:
1. Open the pump door.
2. Put a container below the recess of the
drain pump to collect the water that
flows out.
3. Press the two levers and pull forward
the drainage duct to let the water flow
out.
DOOR SEAL
Check from time to time the door seal and
eliminate eventual possible objects that
could be trapped in the fold.
Loading...