AEG E80, A803E User Manual

207.4820.02

TYP: A 803 E

Deutch Seite 3 Francais page 8 Italiano parte 13 English page 19

SIBIR

LUCH

Fig. 1.

INTRODUCTION

We are pleased that you have chosen this refrigerator and trust that it will be to your complete satisfaction. We should also like to offer some useful tips.

This absorption refrigerator has a (

***

) freezer compartment (-18°C) for freezing ice and storing deep-frozen food. (These values are maintained at ambient temperatures of between +16°C and +32°C). The normal refrigerator compartment is cooled by a separate evaporator.

Please read these instructions carefully before using the refrigerator.

To obtain good service and ensure that the refrigerator operates economically, it must be used as detailed below.

DAMAGE IN TRANSIT

After removing the packaging, examine the refrigerator to ensure it has not been damaged during transit. Should damage have occurred, please proceed as detailed below.

Transit damage must be reported to the company responsible for transport within seven days, at the latest, following delivery of the goods.

TYPE PLATE

The type plate is afixed to the interior of the refrigerator and bears, amongst other information, the following details:

type model description product number serial number

This information must be produced should it become necessary to contact customer service. We recommend that you write these details down here. Further technical information can be found in the paragraph entitled TECHNICAL DATA in these instructions.

INSTALLATION

It is important that the refrigerator should not be exposed to heat radiation from hot appliances (e.g. stoves).

To obtain good service, also in the case of high ambient temperatures, it is important that the cooling unit is sufficiently ventilated. The ventilation apertures at the top of the refrigerator must not be covered up.

PUTTING INTO SERVICE

The 230V electricity supply must be provided by a socket earthed in accordance with current regulations. Before putting the refrigerator into service, please ensure that the mains connection voltage corresponds to the voltage indicated on the type plate.

+ 5 hidden pages