12. ENERGY EFFICIENCY.............................................................................................38
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfservice
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1.
SAFETY INFORMATION
Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible for any injuries or
Page 3
ENGLISH3
damages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and
accessible location for future reference.
1.1 Children and vulnerable people safety
• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
• Do not let children play with the appliance.
• Keep all packaging away from children and dispose of
it appropriately.
• Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are
hot.
• If the appliance has a child safety device, this should
be activated.
• Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
• Children aged 3 years and under must be kept away
from this appliance when it is in operation at all times.
1.2 General Safety
• Only a qualified person must install this appliance and
replace the cable.
• WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to
avoid touching heating elements. Children less than 8
years of age shall be kept away unless continuously
supervised.
• Always use oven gloves to remove or put in
accessories or ovenware.
• Before carrying out any maintenance, disconnect the
appliance from the power supply.
Page 4
www.aeg.com4
• Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric
shock.
• Do not use a steam cleaner to clean the appliance.
• Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the glass door since they can scratch
the surface, which may result in shattering of the glass.
• If the mains power supply cable is damaged, it must
be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.
• Excessive spillage must be removed before the
pyrolytic cleaning. Remove all parts from the oven.
• To remove the shelf supports first pull the front of the
shelf support and then the rear end away from the
side walls. Install the shelf supports in the opposite
sequence.
• Use only the food sensor (core temperature sensor)
recommended for this appliance.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instruction
supplied with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Do not pull the appliance by the
handle.
• Keep the minimum distance from the
other appliances and units.
• Make sure that the appliance is
installed below and adjacent safe
structures.
• The sides of the appliance must stay
adjacent to appliances or to units with
the same height.
• The appliance is equipped with an
electric cooling system. It must be
operated with the electric power
supply.
2.2 Electrical connection
WARNING!
Risk of fire and electrical
shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Always use a correctly installed
shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need
Page 5
ENGLISH5
to be replaced, this must be carried
out by our Authorised Service Centre.
• Do not let mains cables touch or
come near the appliance door,
especially when the door is hot.
• The shock protection of live and
insulated parts must be fastened in
such a way that it cannot be removed
without tools.
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have
an isolation device which lets you
disconnect the appliance from the
mains at all poles. The isolation
device must have a contact opening
width of minimum 3 mm.
• This appliance complies with the
E.E.C. Directives.
2.3 Use
WARNING!
Risk of injury, burns and
electrical shock or explosion.
• This appliance is for household use
only.
• Do not change the specification of
this appliance.
• Make sure that the ventilation
openings are not blocked.
• Do not let the appliance stay
unattended during operation.
• Deactivate the appliance after each
use.
• Be careful when you open the
appliance door while the appliance is
in operation. Hot air can release.
• Do not operate the appliance with
wet hands or when it has contact with
water.
• Do not apply pressure on the open
door.
• Do not use the appliance as a work
surface or as a storage surface.
• Open the appliance door carefully.
The use of ingredients with alcohol
can cause a mixture of alcohol and air.
• Do not let sparks or open flames to
come in contact with the appliance
when you open the door.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
WARNING!
Risk of damage to the
appliance.
• To prevent damage or discoloration
to the enamel:
– do not put ovenware or other
objects in the appliance directly
on the bottom.
– do not put aluminium foil directly
on the bottom of cavity of the
appliance.
– do not put water directly into the
hot appliance.
– do not keep moist dishes and
food in the appliance after you
finish the cooking.
– be careful when you remove or
install the accessories.
• Discoloration of the enamel or
stainless steel has no effect on the
performance of the appliance.
• Use a deep pan for moist cakes. Fruit
juices cause stains that can be
permanent.
• This appliance is for cooking
purposes only. It must not be used for
other purposes, for example room
heating.
• Always cook with the oven door
closed.
• If the appliance is installed behind a
furniture panel (e.g. a door) make sure
the door is never closed when the
appliance is in operation. Heat and
moisture can build up behind a
closed furniture panel and cause
subsequent damage to the appliance,
the housing unit or the floor. Do not
close the furniture panel until the
appliance has cooled down
completely after use.
Page 6
www.aeg.com6
2.4 Care and cleaning
WARNING!
Risk of injury, fire, or damage
to the appliance.
• Before maintenance, deactivate the
appliance and disconnect the mains
plug from the mains socket.
• Make sure the appliance is cold.
There is the risk that the glass panels
can break.
• Replace immediately the door glass
panels when they are damaged.
Contact the Authorised Service
Centre.
• Be careful when you remove the door
from the appliance. The door is
heavy!
• Clean regularly the appliance to
prevent the deterioration of the
surface material.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use any abrasive products,
abrasive cleaning pads, solvents or
metal objects.
• If you use an oven spray, follow the
safety instruction on it's packaging.
• Do not clean the catalytic enamel (if
applicable) with any kind of
detergent.
2.5 Pyrolytic cleaning
WARNING!
Risk of Injury / Fires /
Chemical Emissions (Fumes)
in Pyrolytic Mode.
• Before carrying out a Pyrolitic selfcleaning function or the First Use
please remove from the oven cavity:
– any excess food residues, oil or
grease spills / deposits.
– any removable objects (including
shelves, side rails etc., provided
with the product) particularly any
non-stick pots, pans, trays,
utensils etc.
• Read carefully all the instructions for
Pyrolytic cleaning.
• Keep children away from the
appliance while the Pyrolytic cleaning
is in operation.
The appliance becomes very hot and
hot air is released from the front
cooling vents.
• Pyrolytic cleaning is a high
temperature operation that can
release fumes from cooking residues
and construction materials, as such
consumers are strongly advised to:
– provide good ventilation during
and after each Pyrolytic cleaning.
– provide good ventilation during
and after the first use at maximum
temperature operation.
• Unlike all humans, some birds and
reptiles can be extremely sensitive to
potential fumes emitted during the
cleaning process of all Pyrolytic
Ovens.
– Remove any pets (especially birds)
from the vicinity of the appliance
location during and after the
Pyrolytic cleaning and first use
maximum temperature operation
to a well ventilated area.
• Small pets can also be highly sensitive
to the localized temperature changes
in the vicinity of all Pyrolytic Ovens
when the Pyrolytic self cleaning
program is in operation.
• Non-stick surfaces on pots, pans,
trays, utensils etc., can be damaged
by the high temperature Pyrolytic
cleaning operation of all Pyrolytic
Ovens and can be also a source for
low level harmful fumes.
• Fumes released from all Pyrolytic
Ovens / Cooking Residues as
described are not harmful to humans,
including infants or persons with
medical conditions.
2.6 Internal light
WARNING!
Risk of electrical shock.
• The type of light bulb or halogen
lamp used for this appliance is only
for household appliances. Do not use
it for house lighting.
• Before replacing the lamp, disconnect
the appliance from the power supply.
• Only use lamps with the same
specifications.
Page 7
1
2
3
4
5
2 35
7
13
10
8
9
641
11
12
ENGLISH7
2.7 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains electrical cable
close to the appliance and dispose of
it.
3. PRODUCT DESCRIPTION
3.1 General overview
• Remove the door catch to prevent
children or pets from becoming
trapped in the appliance.
2.8 Service
• To repair the appliance contact an
Authorised Service Centre.
• Use original spare parts only.
Control panel
1
Knob for the oven functions
2
Power lamp / symbol
3
Electronic programmer
4
Knob for the temperature
5
Temperature indicator / symbol
6
Socket for the core temperature
7
sensor
Heating element
8
Lamp
9
Fan
10
Shelf support, removable
11
Cavity embossment
12
Shelf positions
13
3.2 Accessories
Wire shelf
For cookware, cake tins, roasts.
Baking tray
For cakes and biscuits.
Grill- / Roasting pan
Page 8
www.aeg.com8
To bake and roast or as a pan to collect
fat.
Food Sensor
4. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
To set the Time of day refer
to "Clock functions"
chapter.
4.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the oven.
5. DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Retractable knobs
To use the appliance, press the control
knob. The control knob comes out.
To measure the temperature inside the
food.
Refer to "Care and
cleaning" chapter.
Clean the oven and the accessories
before first use.
Put the accessories and the removable
shelf supports back to their initial
position.
1. Turn the knob for the oven functions
to select an oven function.
2. Turn the knob for the temperature to
select a temperature.
3. To deactivate the appliance, turn the
knobs for the oven functions and
temperature to the off position.
5.2 Activating and
deactivating the appliance
It depends on the model if
your appliance has lamps,
knob symbols or
indicators:
• The lamp turns on when
the appliance operates.
• The symbol shows
whether the knob
controls the oven
functions or the
temperature.
• The indicator turns on
when the oven heats up.
Page 9
5.3 Oven functions
Oven functionApplication
Off positionThe appliance is off.
Fast Heat UpTo decrease the heat-up time.
ENGLISH9
True Fan Cooking
Pizza SettingTo bake food on one shelf position for a more intensive
Conventional
Cooking (Top /
Bottom Heat)
DefrostThis function can be used for defrosting frozen foods,
Moist Fan Baking To bake breads, cakes and cookies. To save energy
True Fan Cooking
True Fan Cooking PLUS
GrillingTo grill flat food and to toast bread.
To bake on up to three shelf positions at the same time
and to dry food. Set the temperature 20 - 40 °C lower
than for Top / Bottom Heat.
browning and a crispy bottom. Set the temperature 20
- 40 °C lower than for Top / Bottom Heat.
To bake and roast food on one shelf position.
such as vegetables and fruits. The defrosting time depends on the amount and size of the frozen food.
during cooking. This function must be used in accordance with the Moist Fan Baking table in order to achieve the desired cooking result. To get more information about the recommended settings, refer to the
Hints and Tips chapter, Moist Fan Baking table. This
function was used to define the energy efficiency class
acc. to EN 60350-1.
To bake on up to three shelf positions at the same time
and to dry food. Set the temperature 20 - 40 °C lower
than for Top / Bottom Heat.
To add humidity during the cooking. To get the right
colour and crispy crust during baking. To give more
juiciness during reheating.
Turbo GrillingTo roast larger meat joints or poultry with bones on
one shelf position. Also to make gratins and to brown.
PyrolysisTo activate the automatic pyrolytic cleaning of the
oven. This function burns off residual dirt in the oven.
Page 10
ABC
D
EHFG
www.aeg.com10
The lamp may automatically
deactivate at a temperature
below 60 °C during some
oven functions.
5.4 Activating the True Fan
Cooking PLUS function
This function allows to have an
improvement of humidity during the
cooking.
WARNING!
Risk of burns and damage to
the appliance.
Released humidity can cause burns:
• Do not open the appliance door
when the function True Fan Cooking
PLUS operates, with the exception of
preheating.
• Open the appliance door with care
after the True Fan Cooking PLUS
function stops.
Refer to “Hints and tips”
chapter.
1. Open the oven door.
2. Fill the cavity embossment with tap
water.
The maximum capacity of the cavity
embossment is 250 ml.
Fill the cavity embossment with water
only when the oven is cold.
3. Put food in the appliance and close
the oven door.
4. Set the True Fan Cooking PLUS
function:
5. Turn the knob for the temperature to
select a temperature.
.
CAUTION!
Do not refill the cavity
embossment with water
during cooking or when
the oven is hot.
6. To deactivate the appliance, turn the
knobs for the oven functions and
temperature to the off position.
7. Remove water from the cavity
embossment.
WARNING!
Make sure that the
appliance is cool before
you remove the
remaining water from
the cavity embossment.
5.5 Fast heat up function
The fast heat up function decreases the
heat up time.
Do not put food in the oven
when the Fast heat up
function operates.
1. Set the fast heat up function. Refer to
the Oven functions table.
2. Turn the knob for the temperature to
set the temperature.
An acoustic signal sounds when the
appliance is at the set temperature.
The fast heat up function
does not deactivate after the
acoustic signal. You must
deactivate the function
manually.
3. Set an oven function.
5.6 Display
A. Timer
B. Heat-up and residual heat indicator
C. Water drawer (selected models only)
D. Core temperature sensor (selected
models only)
E. Door lock (selected models only)
F. Hours / minutes
G. Demo mode (selected models only)
H. Clock functions
Page 11
5.7 Buttons
Sensor field / ButtonFunctionDescription
CLOCKTo set a clock function.
MINUSTo set the time.
MINUTE MIND-ERTo set the MINUTE MINDER. Hold the
button for more than 3 seconds to activate or deactivate the oven lamp.
PLUSTo set the time.
TEMPERATURE To check the oven temperature or the
temperature of the core temperature sensor (if applicable). Use only while an oven
function is in operation.
ENGLISH11
5.8 Heat-up indicator
When you activate an oven function, the
bars in the display come on one by
6. CLOCK FUNCTIONS
6.1 Clock functions table
Clock functionApplication
TIME OF DAYTo show or change the time of day. You can change the
DURATIONTo set how long the oven operates. Use only when an
ENDTo set when the oven turns off. Use only when an oven
TIME DELAYCombination of DURATION and END function.
MINUTE MINDERUse to set a countdown time. This function has no ef-
00:00COUNT UP TIMER If you do not set any other clock function the COUNT
one. The bars show that the oven
temperature increases or decreases.
time of day only when the oven is off.
oven function is set.
function is set.
fect on the operation of the oven. You can set the MINUTE MINDER at any time, also if the appliance is off.
UP TIMER automatically monitor how long the oven operates.
It is on immediately when the oven starts to heat.
The Count Up Timer cannot be used with the functions:
DURATION, END, core temperature sensor.
Page 12
www.aeg.com12
6.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows and
"12:00". "12" flashes.
1. Press
2. Press
the minutes.
The display shows
hour. "00" flashes.
3. Press
minutes.
4. Press
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day flashes in the display.
or to set the hours.
to confirm and switch to set
and the set
or to set the current
to confirm or the set time of
6.3 Setting the DURATION
1. Set an oven function.
2. Press
starts to flash.
3. Press
the hours for DURATION time.
4. Press
When the time ends an acoustic signal
sounds for 2 minutes.
setting flash in the display. The appliance
deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
to the off position.
again and again until
or to set the minutes and
to confirm.
and time
6.4 Setting the END
1. Set an oven function.
2. Press
starts to flash.
3. Press
the minutes for END time.
4. Press
At the set time an acoustic signal sounds
for 2 minutes. and time setting flash
in the display. The appliance deactivates
automatically.
again and again until
or to set the hours and
to confirm.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
to the off position.
6.5 Setting the TIME DELAY
function
1. Set an oven function.
2. Press
starts to flash.
3. Press
the hours for DURATION time.
4. Press
shows flashing
5. Press
the minutes for END time.
6. Press
Appliance turns on automatically later
on, works for the set DURATION time
and stops at the set END time. At the set
time an acoustic signal sounds for 2
minutes.
display. The appliance deactivates.
7. Press any button to stop the acoustic
signal.
8. Turn the knob for the oven functions
to the off position.
again and again until
or to set the minutes and
to confirm. The display
.
or to set the hours and
to confirm.
and time setting flash in the
6.6 Setting the MINUTE
MINDER
Minute minder can be both set when the
oven is turned on and off.
1. Press
and "00" flash in the display.
2. Press
and than the minutes.
When the time you set is longer than
60 minutes,
3. Set the hours.
4. The MINUTE MINDER starts
automatically after 5 seconds.
After 90% of the set time the signal
sounds.
5. When the set time ends the signal
sounds for 2 minutes. "00:00" and
button to stop the signal.
.
or to set the seconds
flash in the display.
flash in the display. Press any
Page 13
6.7 COUNT UP TIMER
To reset the Count Up Timer, press and
hold and . The timer starts to count
up again.
7. USING THE ACCESSORIES
ENGLISH13
WARNING!
Refer to Safety chapters.
7.1 Core temperature sensor
The core temperature sensor measures
temperature inside the food. When the
food is at the set temperature, the oven
turns off.
There are two temperatures to be set:
• the oven temperature (minimum 120
°C),
• the food core temperature.
CAUTION!
Use only the core
temperature sensor supplied
and the original replacement
parts.
Directions for the best results:
• Ingredients should be at room
temperature.
• Core temperature sensor cannot be
used for liquid dishes.
• During cooking the core temperature
sensor must remain in the dish and
the plug in the socket.
• Use recommended food core
temperature settings. Refer to "Hints
and tips" chapter.
Every time you put the core
temperature sensor in the
socket, you need to set the
core temperature time
again. You cannot select the
duration and end time.
Food categories: meat, poultry
and fish
1. Set the oven function and
temperature.
2. Insert the tip of the core temperature
sensor into the centre of meat or fish,
in the thickest part if possible. Make
sure that at least 3/4 of the core
temperature sensor is inside of the
dish.
3. Put the plug of the core temperature
sensor into the socket located in the
front frame of the appliance.
The aoven calculates the
approximate cooking time, it
may change.
The display shows the core temperature
sensor symbol.
When you use the core temperature
sensor for the first time, the default core
temperature is 60 °C.
While
for the temperature to change the
flashes, you can use the knob
Page 14
www.aeg.com14
default core temperature. The display
shows the symbol of the core
temperature sensor and the default core
temperature.
4. Press
temperature, or wait 10 seconds for
the setting to be saved automatically.
The new default core temperature is
displayed during the next use of the core
temperature sensor.
When the food is at the set core
temperature, the default core
temperature and
signal sounds for 2 minutes.
5. Press any button or open the oven
door to stop the acoustic signal.
6. Remove the core temperature sensor
plug from the socket and remove the
dish from the appliance.
to save the new core
flashes. An acoustic
WARNING!
There is a risk of burns as the
core temperature sensor
becomes hot. Be careful
when you unplug it and
remove it from the dish.
Food category: casserole
1. Set the oven function and
temperature.
2. Place half of the ingredients in a
baking dish.
3. Insert the tip of the core temperature
sensor exactly in the centre of the
casserole.The core temperature
sensor should be stabilized in one
place during baking. Use a solid
ingredient to achieve that. Use the
rim of the baking dish to support the
silicone handle of the core
temperature sensor. The tip of the
core temperature sensor should not
touch the bottom of a baking dish.
4. Cover the core temperature sensor
with the remaining ingredients.
5. Put the plug of the core temperature
sensor into the socket located in the
front frame of the appliance.
The display shows the core temperature
sensor symbol.
6. Press
temperature, or wait 10 seconds for
the setting to be saved automatically.
The new default core temperature is
displayed during the next use of the core
temperature sensor.
When the food is at the set core
temperature, the default core
temperature and
signal sounds for 2 minutes.
7. Press any button or open the oven
door to stop the acoustic signal.
8. Remove the core temperature sensor
plug from the socket and remove the
dish from the appliance.
to save the new core
flashes. An acoustic
Page 15
ENGLISH15
WARNING!
There is a risk of burns as the
core temperature sensor
becomes hot. Be careful
when you unplug it and
remove it from the dish.
Changing the temperature
during the cooking
You can change the temperature at any
time during the cooking:
1. Press
• one time - the display shows the
• two times - the display shows the
• three times - the display shows
2. Use the knob for the temperature to
change the temperature.
:
set core temperature which
changes every 10 seconds to the
current core temperature.
current oven temperature which
changes every 10 seconds to the
set oven temperature.
the set oven temperature.
7.2 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Baking tray / Deep pan:
Push the baking tray / deep pan between
the guide bars of the shelf support.
Wire shelf and baking tray / deep pan
together:
Push the baking tray / deep pan between
the guide bars of the shelf support and
the wire shelf on the guide bars above.
Small indentation at the top
increase safety. The
indentations are also anti-tip
devices. The high rim
around the shelf prevents
cookware from slipping of
the shelf.
8. ADDITIONAL FUNCTIONS
8.1 Using the Child Lock
When the Child Lock is on the oven
cannot be turned on accidentally.
1. Ensure the knob for the oven
functions is in the off position.
2. Press and hold
same time for 2 seconds.
The signal sounds. SAFE and appear
on the display.
and at the
Page 16
www.aeg.com16
The symbols appear on the
display also when Pyrolysis
function operates.
To turn off the Child Lock, repeat step 2.
8.2 Using the Function Lock
You can turn on the Function Lock
function only when the oven operates.
When the Function lock is on the
temperature and time settings of a
running oven function cannot be
changed accidentally.
1. Select an oven function and set it
according your preferences.
2. Press and hold
same time for 2 seconds.
The signal sounds. Loc appears on the
display for 5 seconds.
Loc appears on the display
when you turn the knob for
the temperature or press any
button when the Function
lock is on.
When you turn the knob for the oven
functions, the oven stops.
When you turn off the oven while the
Function Lock is on, the Function Lock
switches automatically to the Child Lock.
Refer to "Using the Child Lock".
If the Pyrolysis function
operates, the door is locked
and
display.
and at the
appears on the
Temperature (°C)Switch-off time (h)
30 - 11512.5
120 - 1958.5
200 - 2455.5
250 - maximum1.5
After an automatic switch-off, press any
button to operate the appliance again.
The Automatic switch-off
does not work with the
functions: core temperature
sensor, Light, Duration, End.
8.5 Cooling fan
When the oven operates, the cooling fan
turns on automatically to keep the
surfaces of the oven cool. If you turn off
the oven, the cooling fan can continue to
operate until the oven cools down.
8.6 Mechanical door lock
The door lock is turned off when you buy
the oven.
To turn off the Function Lock, repeat
step 2.
8.3 Residual heat indicator
When you turn off the oven, the display
shows the residual heat indicator
the temperature in the oven is more than
40 °C.
if
8.4 Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some
time if an oven function operates and
you do not change any settings.
CAUTION!
Only move the mechanical
door lock device
horizontally.
Do not move it vertically.
Page 17
CAUTION!
1
2
Do not push the door lock
when you close the oven
door.
8.7 Using the mechanical door
lock
1. To turn on the door lock pull the
door lock forward until it locks in
place.
2. To turn off the door lock push the
door lock back into the panel.
ENGLISH17
8.8 Opening the door with
turned on mechanical door
lock
You can open the door when the
mechanical door lock is turned on.
1. Push the door lock slightly.
2. Open the door by pulling it with the
handle.
If you press the door lock until there is a
click, you turn off the door lock.
9. HINTS AND TIPS
WARNING!
Refer to Safety chapters.
The temperature and baking
times in the tables are
guidelines only. They
depend on the recipes and
the quality and quantity of
the ingredients used.
9.1 Inner side of the door
In some models, on the inner side of
the door you can find:
• the numbers of the shelf positions.
• information about the oven functions,
recommended shelf positions and
temperatures for typical dishes.
9.2 True Fan Cooking PLUS
Before preheating fill the
cavity embossment with
water only when the oven is
cold.
Refer to "Activating the True Fan
Cooking PLUS function"
Page 18
www.aeg.com18
Bakery products
FoodWater in the
cavity em-
Temperature (°C)
Time (min)Shelf po-
bossment
(ml)
Bread15018035 - 402
Bread rolls15020020 - 252
Homestyle
15023010 - 202
pizza
Focaccia150200 - 21010 - 202
Cookies,
150150 - 18010 - 202
scones,
croissants
Plum cake,
150160 - 18030 - 602
apple pie,
cinnamon
rolls
1)
Preheat in an empty oven for 5 minutes before cooking.
Cook from frozen
sition
Comments
Use baking tray.
Use baking tray.
Use baking tray.
Use baking tray.
Use baking tray.
Use cake mould.
1)
1)
1)
1)
1)
1)
FoodWater in the cavi-
ty embossment
Temperature
(°C)
Time (min)Shelf posi-
(ml)
Pizza frozen200200 - 21010 - 20
Frozen lasagna200180 - 20035 - 50
Frozen croissant200170 - 18015 - 25
1)
Preheat in an empty oven for 10 minutes before cooking.
Food regeneration
FoodWater in the cavi-
ty embossment
Temperature
(°C)
Time (min)Shelf posi-
(ml)
Bread10011015 - 252
Bread rolls10011010 - 202
Homestyle pizza 10011015 - 252
Focaccia10011015 - 252
Vegetables10011015 - 252
tion
1)
2
1)
2
1)
2
tion
Page 19
ENGLISH19
FoodWater in the cavi-
ty embossment
(ml)
Rice10011015 - 252
Pasta10011015 - 252
Meat10011015 - 252
Temperature
(°C)
Time (min)Shelf posi-
tion
Roasting
FoodWater in the
cavity embossment
(ml)
Roast pork20018065 - 802Glass baking dish
Roast beef20020050 - 602Glass baking dish
Chicken20021060 - 802Glass baking dish
9.3 Baking
• Your oven may bake or roast
differently to the oven you had
before. Adapt your usual settings
such as temperature, cooking time
and shelf position to the values in the
tables.
• Use the lower temperature the first
time.
• If you cannot find the settings for a
special recipe, look for the similar
one.
Temperature (°C)
Time (min)Shelf po-
sition
Comments
• You can extend baking times by 10 –
15 minutes if you bake cakes on more
than one shelf position.
• Cakes and pastries at different
heights do not always brown equally
at first. If this occurs, do not change
the temperature setting. The
differences equalize during the
baking procedure.
• Trays in the oven can twist during
baking. When the trays become cold
again, the distortions disappear.
9.4 Tips on baking
Baking resultsPossible causeRemedy
The bottom of the cake is
not browned sufficiently.
The cake sinks and becomes
soggy, lumpy or streaky.
The cake sinks and becomes
soggy, lumpy or streaky.
The shelf position is incorrect.
The oven temperature is too
high.
The baking time is too short. Set a longer baking time.
Put the cake on a lower
shelf.
The next time you bake, set
a slightly lower oven temperature.
You cannot decrease baking times by setting higher
temperatures.
Page 20
www.aeg.com20
Baking resultsPossible causeRemedy
The cake sinks and becomes
soggy, lumpy or streaky.
There is too much liquid in
the mixture.
Use less liquid. Be careful
with mixing times, especially
if you use a mixing machine.
The cake is too dry.The oven temperature is too
low.
The next time you bake, set
a higher oven temperature.
The cake is too dry.The baking time is too long. The next time you bake, set
a shorter baking time.
The cake browns unevenly.The oven temperature is too
high and the baking time is
too short.
The cake browns unevenly.The mixture is unevenly dis-
tributed.
The cake is not ready in the
baking time given.
The oven temperature is too
low.
Set a lower oven temperature and a longer baking
time.
Spread the mixture evenly
on the baking tray.
The next time you bake, set
a slightly higher oven temperature.
Yeast cakes with delicate toppings (e.g. quark, cream, cus-
Top / Bottom Heat
160 - 180
tard)
1)
Preheat the oven.
2)
Use a deep pan.
Biscuits
FoodFunctionTemperature
Time (min)Shelf position
(°C)
Short pastry biscuits
Biscuits made
with sponge
True Fan Cooking
True Fan Cooking
150 - 16010 - 203
150 - 16015 - 203
mixture
Pastries made
with egg white /
True Fan Cooking
80 - 100120 - 1503
Meringues
MacaroonsTrue Fan Cook-
100 - 12030 - 503
ing
1)
1)
1)
1)
1)
Time
(min)
1. 20
2. 30 60
20 - 353
10 - 203
20 - 303
40 - 803
Shelf position
1
Page 22
www.aeg.com22
FoodFunctionTemperature
(°C)
Biscuits made
with yeast
True Fan Cooking
150 - 16020 - 403
dough
Puff pastriesTrue Fan Cook-
ing
RollsTrue Fan Cook-
ing
RollsTop / Bottom
Heat
1)
Preheat the oven.
170 - 180
160
190 - 210
1)
1)
1)
9.6 Bakes and gratins
FoodFunctionTemperature
(°C)
Pasta bakeTop / Bottom
Heat
LasagneTop / Bottom
Heat
Vegetables au
1)
gratin
Baguettes topped with melted
Turbo Grilling160 - 17015 - 301
True Fan Cooking
cheese
Sweet bakesTop / Bottom
Heat
Fish bakesTop / Bottom
Heat
Stuffed vegetables
1)
Preheat the oven.
True Fan Cooking
180 - 20045 - 601
180 - 20025 - 401
160 - 17015 - 301
180 - 20040 - 601
180 - 20030 - 601
160 - 17030 - 601
Time (min)Shelf position
20 - 303
10 - 253
10 - 253
Time (min)Shelf position
9.7 Moist Fan Baking
For best results follow the
baking times listed in the
table below.
Page 23
ENGLISH23
FoodTemperature
(°C)
Pasta gratin200 - 22045 - 553
Potato gratin180 - 20070 - 853
Moussaka170 - 19070 - 953
Lasagne180 - 20075 - 903
Cannelloni180 - 20070 - 853
Bread pudding190 - 20055 - 703
Rice pudding170 - 19045 - 603
Apple cake, made with sponge mixture (round cake tin)
White bread190 - 20055 - 703
160 - 17070 - 803
Time (min)Shelf position
9.8 Multilevel Baking
Use the function True Fan Cooking.
Cakes / pastries / breads on baking trays
FoodTemperature
(°C)
Cream puffs /
Eclairs
Dry streusel
cake
1)
Preheat the oven.
160 - 180
150 - 16030 - 451 / 4-
1)
Biscuits / small cakes / small cakes / pastries / rolls
FoodTemperature
(°C)
Short pastry biscuits
Biscuits made
with sponge
mixture
Biscuits made
with egg white,
meringues
Macaroons100 - 12040 - 801 / 4-
150 - 16020 - 401 / 41 / 3 / 5
160 - 17025 - 401 / 4-
80 - 100130 - 1701 / 4-
Time (min)Shelf position
2 positions3 positions
25 - 451 / 4-
Time (min)Shelf position
2 positions3 positions
Page 24
www.aeg.com24
FoodTemperature
(°C)
Biscuits made
160 - 17030 - 601 / 4-
Time (min)Shelf position
2 positions3 positions
with yeast
dough
Puff pastries
170 - 180
1)
30 - 501 / 4-
Rolls18020 - 301 / 4-
1)
Preheat the oven.
9.9 Pizza Setting
FoodTemperature (°C)Time (min)Shelf position
Pizza (thin crust)
Pizza (with a lot of
200 - 230
180 - 20020 - 302
1)2)
topping)
Tarts180 - 20040 - 551
Spinach flan160 - 18045 - 601
Quiche Lorraine170 - 19045 - 551
Swiss Flan170 - 19045 - 551
Cheesecake140 - 16060 - 901
Apple cake, covered 150 - 17050 - 601
Vegetable pie160 - 18050 - 601
Unleavened bread
Puff pastry flan
Flammekuchen (Pizza-like dish from Al-
230 - 250
160 - 180
230 - 250
1)
1)
1)
sace)
Piroggen (Russian
version of calzone)
1)
Preheat the oven.
2)
Use a deep pan.
180 - 200
1)
15 - 202
10 - 202
45 - 552
12 - 202
15 - 252
9.10 Roasting
• Use heat-resistant ovenware to roast.
Refer to the instructions of the
ovenware manufacturer.
• You can roast large roasting joints
directly in the deep pan or on the wire
shelf above the deep pan.
• Put some liquid in the deep pan to
prevent the meat juices or fat from
burning on it's surface.
Page 25
ENGLISH25
• All types of meat that can be browned
– roast meat and fish in pieces
or have crackling can be roasted in
the roasting tin without the lid.
– baste large roasts and poultry
• If necessary, turn the roast after 1/2 to
2/3 of the cooking time.
• To keep meat more succulent:
– roast lean meat in the roasting tin
with the lid or use roasting bag.
9.11 Roasting tables
Beef
FoodQuantityFunctionTempera-
ture (°C)
Pot roast1 - 1.5 kgTop / Bot-
tom Heat
Roast beef or fillet: rare
Roast beef or fillet: medium
Roast beef or fillet: well done
1)
Preheat the oven.
per cm of
thickness
per cm of
thickness
per cm of
thickness
Turbo Grilling
Turbo Grilling
Turbo Grilling
Veal
FoodQuantity
(kg)
Roast veal1Turbo Grill-
Knuckle of
veal
1.5 - 2Turbo Grill-
FunctionTemperature
ing
ing
230120 - 1501
190 - 200
180 - 190
170 - 180
(°C)
160 - 18090 - 1201
160 - 180120 - 1501
weighting minimum 1 kg.
with their juices several times
during roasting.
Time (min)Shelf posi-
tion
5 - 61
1)
6 - 81
1)
8 - 101
1)
Time (min)Shelf posi-
tion
Lamb
FoodQuantity
(kg)
Leg of lamb /
Roast lamb
Saddle of
lamb
1 - 1.5Turbo Grill-
1 - 1.5Turbo Grill-
Game
FoodQuantity
(kg)
Saddle / Leg
of hare
up to 1Top / Bottom
FunctionTemperature
(°C)
150 - 170100 - 1201
ing
160 - 18040 - 601
ing
FunctionTemperature
(°C)
1)
Heat
230
Time (min)Shelf posi-
tion
Time (min)Shelf posi-
tion
30 - 401
Page 26
www.aeg.com26
FoodQuantity
(kg)
Saddle of
venison
Haunch of
venison
1)
Preheat the oven.
1.5 - 2Top / Bottom
1.5 - 2Top / Bottom
FunctionTemperature
Heat
Heat
Poultry
FoodQuantity
(kg)
Poultry portions
Half chicken0.4 - 0.5 each Turbo Grill-
Chicken,
poulard
Duck1.5 - 2Turbo Grill-
Goose3.5 - 5Turbo Grill-
Turkey2.5 - 3.5Turbo Grill-
Turkey4 - 6Turbo Grill-
0.2 - 0.25
each
1 - 1.5Turbo Grill-
FunctionTemperature
Turbo Grilling
ing
ing
ing
ing
ing
ing
Time (min)Shelf posi-
(°C)
210 - 22035 - 401
180 - 20060 - 901
Time (min)Shelf posi-
(°C)
200 - 22030 - 501
190 - 21035 - 501
190 - 21050 - 701
180 - 20080 - 1001
160 - 180120 - 1801
160 - 180120 - 1501
140 - 160150 - 2401
tion
tion
Fish (steamed)
FoodQuantity
(kg)
Whole fish1 - 1.5Top / Bottom
FunctionTemperature
Heat
9.12 Grilling
• Always grill with the maximum
temperature setting.
• Set the shelf into the shelf position as
recommended in the grilling table.
• Always set the pan to collect the fat
into the first shelf position.
Time (min)Shelf posi-
(°C)
210 - 22040 - 601
tion
• Grill only flat pieces of meat or fish.
• Always preheat the empty oven with
the grill functions for 5 minutes.
CAUTION!
Always grill with the oven
door closed.
Page 27
ENGLISH27
Grilling
FoodTemperature
(°C)
Roast beef210 - 23030 - 4030 - 402
Filet of beef23020 - 3020 - 303
Back of veal210 - 23030 - 4030 - 402
Back of lamb210 - 23025 - 3520 - 253
Whole Fish, 500
- 1000 g
210 - 23015 - 3015 - 303 / 4
Time (min)Shelf position
1st side2nd side
9.13 Frozen Foods
Use the function True Fan Cooking.
FoodTemperature (°C)Time (min)Shelf position
Pizza, frozen200 - 22015 - 252
Pizza American, frozen
Pizza, chilled210 - 23013 - 252
Pizza Snacks, frozen180 - 20015 - 302
French Fries, thin200 - 22020 - 303
French Fries, thick200 - 22025 - 353
Wedges / Croquettes
Hash Browns210 - 23020 - 303
Lasagne / Cannelloni, fresh
Lasagne / Cannelloni, frozen
Oven baked cheese170 - 19020 - 303
Chicken Wings190 - 21020 - 302
190 - 21020 - 252
220 - 23020 - 353
170 - 19035 - 452
160 - 18040 - 602
9.14 Defrost
• Remove the food packaging and put
the food on a plate.
• Use the first shelf position from the
bottom.
• Do not cover the food with a bowl or
a plate, as this can extend the defrost
time.
• For large portions of food place an
upturned empty plate on the bottom
of the oven cavity. Put the food in a
deep plate or dish and set it on top of
the plate inside the oven. Remove
shelf supports if necessary.
Page 28
www.aeg.com28
FoodQuantity
(kg)
Chicken1100 - 14020 - 30Put the chicken on an upturned
Meat1100 - 14020 - 30Turn halfway through.
Trout0.1525 - 3510 - 15-
Strawberries
Butter0.2530 - 4010 - 15-
Cream2 x 0.280 - 10010 - 15Whip the cream when still slightly
Gateau1.46060-
0.330 - 4010 - 20-
9.15 Preserving - Bottom Heat
• Use only preserve jars of the same
dimensions available on the market.
• Do not use jars with twist-off and
bayonet type lids or metal tins.
• Use the first shelf from the bottom for
this function.
• Put no more than six one-litre
preserve jars on the baking tray.
Defrosting
time (min)
Further defrosting time
(min)
Comments
saucer in a big plate. Turn halfway
through.
frozen in places.
• The jars cannot touch each other.
• Put approximately 1/2 litre of water
into the baking tray to give sufficient
moisture in the oven.
• When the liquid in the jars starts to
simmer (after approximately 35 - 60
minutes with one-litre jars), stop the
oven or decrease the temperature to
100 °C (see the table).
Fat accumulation or other food
remains may result in a fire. The risk is
higher for the grill pan.
• Clean stubborn dirt with a special
oven cleaner.
• Clean all accessories after each use
and let them dry. Use a soft cloth with
warm water and a cleaning agent.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a
dishwasher. It can cause damage to
the nonstick coating.
Time (min)Shelf position
(°C)
1)2)
24 - 30
2. Let the vinegar dissolve the residual
limestone at the ambient
temperature for 30 minutes.
3. Clean the cavity with warm water and
a soft cloth.
10.3 Removing the shelf
supports
To clean the oven, remove the shelf
supports.
CAUTION!
Be careful when you remove
the shelf supports.
1. Pull the front of the shelf support
away from the side wall.
4
10.2 Cleaning the cavity
embossment
The cleaning procedure removes
limestone residue from the cavity
embossment after cooking with steam.
We recommend to do the
cleaning procedure at least
every 5 - 10 True Fan
Cooking PLUS cycles.
1. Put 250 ml of white vinegar into the
cavity embossment at the bottom of
the oven.
Use maximum 6% vinegar without
herbs.
2. Pull the rear end of the shelf support
away from the side wall and remove
it.
Install the removed accessories in the
opposite sequence.
Page 34
A
A
www.aeg.com34
10.4 Pyrolysis
CAUTION!
Remove all accessories and
removable shelf supports.
Do not start the Pyrolysis if
you did not fully close the
oven door. In some models,
the display shows "C3"
when this error occurs.
WARNING!
The oven becomes very hot.
There is a risk of burns.
CAUTION!
If there are other appliances
installed in the same
cabinet, do not use them
when the Pyrolysis function
operates. It can cause
damage to the appliance.
1. Wipe out the cavity with a wet, soft
cloth.
2. Clean the inner side of the door with
hot water, so that the residues do not
burn from the hot air.
3. Set the Pyrolysis function. Refer to
"Daily use" chapter, "Oven
Functions".
4. When
set the pyrolysis duration:
flashes, press or to
OptionDescription
P1Light clean-
ing. Duration:
1 h 30 min.
P2Normal clean-
ing. Duration:
3 h.
display shows
heat indicator until the door unlocks.
7. When pyrolysis is completed, the
display shows the time of day. The
oven door stays locked.
8. When the oven is cool again, a signal
sounds and the door unlocks.
and the bars of the
10.5 Cleaning reminder
To remind you that the pyrolysis is
necessary, PYR flashes in the display for
10 seconds after each activation and
deactivation of the oven.
The cleaning reminder
goes out:
• after the end of the
pyrolysis.
• if you press
the same time while PYR
flashes in the display.
and at
10.6 Removing and installing
the door
You can remove the door and the
internal glass panels to clean it. The
number of glass panels is different for
different models.
WARNING!
Be careful when you remove
the door from the appliance.
The door is heavy.
1. Open the door fully.
2. Fully lift up the clamping levers (A) on
the two door hinges.
After 2 seconds the pyrolysis starts.
You can use the END function to delay
the start of the cleaning.
During the pyrolysis the oven lamp is off.
5. To change the default length of the
pyrolysis (P1 or P2), press
, and then press or .
6. When the oven is at the set
temperature, the door locks. The
to set
3. Close the door until it is at an angle
of approximately 45°.
Page 35
45°
4. Hold the door with one hand on each
1
2
B
A B C
side and pull it away from the
appliance at an upwards angle.
5. Put the door with the outer side
down on a soft cloth on a stable
surface. This is to prevent scratches.
6. Hold the door trim (B) on the top
edge of the door at the two sides
and push inwards to release the clip
seal.
ENGLISH35
When the cleaning is completed, do the
above steps in the opposite sequence.
Install the smaller panel first, then the
larger and the door.
WARNING!
Make sure that the glasses
are inserted in the correct
position otherwise the
surface of the door may
overheat.
Make sure that you put the glass panels
(C, B and A) back in the correct
sequence. First, insert panel C, which has
a square printed on the left side and a
triangle on the right side. You will also
find those symbols embossed on the
door frame. The triangle symbol on the
glass must match the triangle on the
door frame, and the square symbol must
match the square. After that insert the
other two glass panels.
CAUTION!
Rough handling of the glass,
especially around the edges
of the front panel, can cause
the glass to break.
7. Pull the door trim to the front to
remove it.
8. Hold the door glass panels on their
top edge one by one and pull them
up out of the guide.
9. Clean the glass panel with water and
soap. Dry the glass panel carefully.
10.7 Replacing the lamp
Put a cloth on the bottom of the interior
of the appliance. It prevents damage to
the lamp glass cover and the cavity.
WARNING!
Danger of electrocution!
Disconnect the fuse before
you replace the lamp.
The lamp and the lamp glass
cover can be hot.
1. Deactivate the appliance.
Page 36
www.aeg.com36
2. Remove the fuses from the fuse box
or deactivate the circuit breaker.
The top lamp
1. Turn the lamp glass cover
counterclockwise to remove it.
11. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
11.1 What to do if...
ProblemPossible causeRemedy
You cannot activate or operate the oven.
The oven does not heat up.The oven is deactivated.Activate the oven.
The oven does not heat up.The clock is not set.Set the clock.
The oven does not heat up.The necessary settings are
The oven does not heat up.The automatic switch-off is
The oven does not heat up.The fuse is blown.Make sure that the fuse is
The lamp does not operate.The lamp is defective.Replace the lamp.
The core temperature sensor
does not operate.
It takes too long to cook the
dishes or they cook too
quickly.
The oven is not connected
to an electrical supply or it is
connected incorrectly.
not set.
activated.
The plug of the core temperature sensor is not correctly installed into the socket.
The temperature is too low
or too high.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300
°C heat-resistant lamp.
4. Install the glass cover.
Check if the oven is correctly
connected to the electrical
supply (refer to the connection diagram if available).
Make sure that the settings
are correct.
Refer to "Automatic switchoff".
the cause of the malfunction.
If the fuse is blown again
and again, contact a qualified electrician.
Put the plug of the core temperature sensor as far as
possible into the socket.
Adjust the temperature if
necessary. Follow the advice
in the user manual.
Page 37
ProblemPossible causeRemedy
Steam and condensation
settle on the food and in the
cavity of the oven.
You left the dish in the oven
for too long.
Do not leave the dishes in
the oven for longer than 15 20 minutes after the cooking
process ends.
The display shows "C2".You want to start the Pyroly-
sis or Defrost function, but
you did not remove the core
Remove the core temperature sensor plug from the
socket.
temperature sensor plug
from the socket.
The display shows "C3".The cleaning function does
Fully close the door.
not operate. You did not
fully close the door, or the
door lock is defective.
The display shows "F102".• You did not fully close
the door.
• The door lock is defec-
tive.
• Fully close the door.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows
"F102" again, contact the
Customer Care Department.
The display shows an error
code that is not in this table.
There is an electrical fault.• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
the Customer Care Department.
There is no good cooking
performance using the True
Fan Cooking PLUS function.
There is no good cooking
performance using the True
Fan Cooking PLUS function.
The water in the cavity embossment does not boil.
You did not activate the
True Fan Cooking PLUS
function.
You did not fill the cavity
embossment with water.
Refer to "Activating the True
Fan Cooking PLUS function".
Refer to "Activating the True
Fan Cooking PLUS function".
The temperature is too low.Set the temperature at least
to 110 °C.
Refer to “Hints and tips”
chapter.
ENGLISH37
Page 38
www.aeg.com38
ProblemPossible causeRemedy
The water comes out of the
cavity embossment.
There is too much water in
the cavity embossment.
Deactivate the oven and
make sure that the appliance
is cold. Wipe the water with
a cloth or sponge. Add the
correct amount of water to
the cavity embossment. Refer to the specific procedure.
11.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.).........................................
Product number (PNC).........................................
Serial number (S.N.).........................................
12. ENERGY EFFICIENCY
12.1 Product Fiche and information according to EU 65-66/2014
Supplier's nameAEG
Model identification
Energy Efficiency Index81.2
Energy efficiency classA+
Energy consumption with a standard load, conventional mode
Energy consumption with a standard load, fan-forced
mode
Number of cavities1
Heat sourceElectricity
Volume71 l
Type of ovenBuilt-In Oven
on the front frame of the appliance
cavity. Do not remove the rating plate
from the appliance cavity.
BPK552220M
BPS552220M
1.09 kWh/cycle
0.69 kWh/cycle
Page 39
ENGLISH39
Mass
EN 60350-1 - Household electric cooking
appliances - Part 1: Ranges, ovens, steam
ovens and grills - Methods for measuring
performance.
12.2 Energy saving
The oven contains features
which help you save energy
during everyday cooking.
General hints
Make sure that the oven door is closed
properly when the appliance operates.
Do not open the door too often during
cooking. Keep the door gasket clean and
make sure it is well fixed in its position.
Use metal dishes to improve energy
saving.
When possible, do not preheat the oven
before you put the food inside.
When the cooking duration is longer
than 30 minutes, reduce the oven
temperature to minimum 3 - 10 minutes
before the end of the cooking time,
depending on the duration of the
cooking. The residual heat inside the
oven will continue to cook.
Use the residual heat to warm up other
dishes.
Keep breaks between baking as short as
possible when you prepare few dishes at
one time.
BPK552220M37.5 kg
BPS552220M40.0 kg
Cooking with fan
When possible, use the cooking
functions with fan to save energy.
Residual heat
If a programme with the Duration or End
Time selection is activated and the
cooking time is longer than 30 minutes,
the heating elements automatically
deactivate earlier in some oven
functions.
The fan and lamp continue to operate.
Keep food warm
Choose the lowest possible temperature
setting to use residual heat and keep a
meal warm. The residual heat indicator
or temperature appears on the display.
Cooking with the lamp off
Turn off the lamp during cooking. Turn it
on only when you need it.
Moist Fan Baking
Function designed to save energy during
cooking. It operates in such a way that
the temperature in the oven cavity may
differ from the temperature indicated on
the display during a cooking cycle and
cooking times may be different from the
cooking times in other programmes.
When you use Moist Fan Baking, the
lamp automatically turns off after 30
seconds. You may turn on the lamp again
but this action will reduce the expected
energy savings.
13. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol
.
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
*
Page 40
www.aeg.com/shop
867336607-C-282017
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.