AEG BCS552250M User Manual
BCK552250M
BCS552250M
USER
MANUAL
EN User Manual
Oven
www.aeg.com2
CONTENTS
1. SAFETY INFORMATION............................................................................................. 2
2. SAFETY INSTRUCTIONS.............................................................................................4
3. PRODUCT DESCRIPTION...........................................................................................6
4. BEFORE FIRST USE..................................................................................................... 7
5. DAILY USE.................................................................................................................... 7
6. CLOCK FUNCTIONS.................................................................................................10
7. USING THE ACCESSORIES...................................................................................... 12
8. ADDITIONAL FUNCTIONS...................................................................................... 15
9. HINTS AND TIPS........................................................................................................16
10. CARE AND CLEANING.......................................................................................... 31
11. TROUBLESHOOTING.............................................................................................34
12. ENERGY EFFICIENCY.............................................................................................36
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfservice
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1.
SAFETY INFORMATION
Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible for any injuries or
ENGLISH 3
damages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and
accessible location for future reference.
1.1 Children and vulnerable people safety
• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
• Do not let children play with the appliance.
• Keep all packaging away from children and dispose of
it appropriately.
• Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are
hot.
• If the appliance has a child safety device, this should
be activated.
• Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
• Children aged 3 years and under must be kept away
from this appliance when it is in operation at all times.
1.2 General Safety
• Only a qualified person must install this appliance and
replace the cable.
• WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to
avoid touching heating elements. Children less than 8
years of age shall be kept away unless continuously
supervised.
• Always use oven gloves to remove or put in
accessories or ovenware.
• Before carrying out any maintenance, disconnect the
appliance from the power supply.
www.aeg.com4
• Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric
shock.
• Do not use a steam cleaner to clean the appliance.
• Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the glass door since they can scratch
the surface, which may result in shattering of the glass.
• If the mains power supply cable is damaged, it must
be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.
• To remove the shelf supports first pull the front of the
shelf support and then the rear end away from the
side walls. Install the shelf supports in the opposite
sequence.
• Use only the food sensor (core temperature sensor)
recommended for this appliance.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instruction
supplied with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Do not pull the appliance by the
handle.
• Keep the minimum distance from the
other appliances and units.
• Make sure that the appliance is
installed below and adjacent safe
structures.
• The sides of the appliance must stay
adjacent to appliances or to units with
the same height.
• The appliance is equipped with an
electric cooling system. It must be
operated with the electric power
supply.
2.2 Electrical connection
WARNING!
Risk of fire and electrical
shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Always use a correctly installed
shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need
to be replaced, this must be carried
out by our Authorised Service Centre.
• Do not let mains cables touch or
come near the appliance door,
especially when the door is hot.
• The shock protection of live and
insulated parts must be fastened in
ENGLISH 5
such a way that it cannot be removed
without tools.
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have
an isolation device which lets you
disconnect the appliance from the
mains at all poles. The isolation
device must have a contact opening
width of minimum 3 mm.
• This appliance complies with the
E.E.C. Directives.
2.3 Use
WARNING!
Risk of injury, burns and
electrical shock or explosion.
• This appliance is for household use
only.
• Do not change the specification of
this appliance.
• Make sure that the ventilation
openings are not blocked.
• Do not let the appliance stay
unattended during operation.
• Deactivate the appliance after each
use.
• Be careful when you open the
appliance door while the appliance is
in operation. Hot air can release.
• Do not operate the appliance with
wet hands or when it has contact with
water.
• Do not apply pressure on the open
door.
• Do not use the appliance as a work
surface or as a storage surface.
• Open the appliance door carefully.
The use of ingredients with alcohol
can cause a mixture of alcohol and air.
• Do not let sparks or open flames to
come in contact with the appliance
when you open the door.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
WARNING!
Risk of damage to the
appliance.
• To prevent damage or discoloration
to the enamel:
– do not put ovenware or other
objects in the appliance directly
on the bottom.
– do not put aluminium foil directly
on the bottom of cavity of the
appliance.
– do not put water directly into the
hot appliance.
– do not keep moist dishes and
food in the appliance after you
finish the cooking.
– be careful when you remove or
install the accessories.
• Discoloration of the enamel or
stainless steel has no effect on the
performance of the appliance.
• Use a deep pan for moist cakes. Fruit
juices cause stains that can be
permanent.
• This appliance is for cooking
purposes only. It must not be used for
other purposes, for example room
heating.
• Always cook with the oven door
closed.
• If the appliance is installed behind a
furniture panel (e.g. a door) make sure
the door is never closed when the
appliance is in operation. Heat and
moisture can build up behind a
closed furniture panel and cause
subsequent damage to the appliance,
the housing unit or the floor. Do not
close the furniture panel until the
appliance has cooled down
completely after use.
2.4 Care and cleaning
WARNING!
Risk of injury, fire, or damage
to the appliance.
1
2
3
4
5
2 3 5
7
13
10
8
9
641
11
12
www.aeg.com6
• Before maintenance, deactivate the
appliance and disconnect the mains
plug from the mains socket.
• Make sure the appliance is cold.
There is the risk that the glass panels
can break.
• Replace immediately the door glass
panels when they are damaged.
Contact the Authorised Service
Centre.
• Be careful when you remove the door
from the appliance. The door is
heavy!
• Clean regularly the appliance to
prevent the deterioration of the
surface material.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use any abrasive products,
abrasive cleaning pads, solvents or
metal objects.
• If you use an oven spray, follow the
safety instruction on it's packaging.
• Do not clean the catalytic enamel (if
applicable) with any kind of
detergent.
2.5 Internal light
• The type of light bulb or halogen
lamp used for this appliance is only
for household appliances. Do not use
it for house lighting.
WARNING!
Risk of electrical shock.
• Before replacing the lamp, disconnect
the appliance from the power supply.
• Only use lamps with the same
specifications.
2.6 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains electrical cable
close to the appliance and dispose of
it.
• Remove the door catch to prevent
children or pets from becoming
trapped in the appliance.
2.7 Service
• To repair the appliance contact an
Authorised Service Centre.
• Use original spare parts only.
3. PRODUCT DESCRIPTION
3.1 General overview
Control panel
1
Knob for the oven functions
2
Power lamp / symbol
3
Electronic programmer
4
Knob for the temperature
5
Temperature indicator / symbol
6
Socket for the core temperature
7
sensor
Heating element
8
Lamp
9
Fan
10
Shelf support, removable
11
Cavity embossment
12
Shelf positions
13
ENGLISH 7
3.2 Accessories
Wire shelf
For cookware, cake tins, roasts.
Baking tray
For cakes and biscuits.
Grill- / Roasting pan
To bake and roast or as a pan to collect
fat.
Food Sensor
To measure the temperature inside the
food.
4. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
To set the Time of day refer
to "Clock functions"
chapter.
4.1 Initial Cleaning
Remove all accessories and removable
shelf supports from the appliance.
5. DAILY USE
WARNING!
Refer to Safety chapters.
Refer to "Care and
cleaning" chapter.
Clean the appliance and the accessories
before first use.
Put the accessories and the removable
shelf supports back to their initial
position.
5.1 Retractable knobs
To use the appliance, press the control
knob. The control knob comes out.
www.aeg.com8
5.2 Activating and
deactivating the appliance
It depends on the model if
your appliance has lamps,
knob symbols or
indicators:
• The lamp turns on when
the appliance operates.
• The symbol shows
whether the knob
controls the oven
functions or the
temperature.
• The indicator turns on
when the oven heats up.
5.3 Oven functions
Oven function Application
Off position The appliance is off.
Fast Heat Up To decrease the heat-up time.
True Fan Cooking
Pizza Setting To bake food on one shelf position for a more intensive
Conventional
Cooking (Top /
Bottom Heat)
Defrost This function can be used for defrosting frozen foods,
Moist Fan Baking To bake breads, cakes and cookies. To save energy
To bake on up to three shelf positions at the same time
and to dry food. Set the temperature 20 - 40 °C lower
than for Top / Bottom Heat.
browning and a crispy bottom. Set the temperature 20
- 40 °C lower than for Top / Bottom Heat.
To bake and roast food on one shelf position.
such as vegetables and fruits. The defrosting time depends on the amount and size of the frozen food.
during cooking. This function must be used in accordance with the Moist Fan Baking table in order to achieve the desired cooking result. To get more information about the recommended settings, refer to the
Hints and Tips chapter, Moist Fan Baking table. This
function was used to define the energy efficiency class
acc. to EN 60350-1.
1. Turn the knob for the oven functions
to select an oven function.
2. Turn the knob for the temperature to
select a temperature.
3. To deactivate the appliance, turn the
knobs for the oven functions and
temperature to the off position.
Oven function Application
True Fan Cooking
True Fan Cooking PLUS
Grilling To grill flat food and to toast bread.
Turbo Grilling To roast larger meat joints or poultry with bones on
Catalysis To help the self-cleaning catalytic oven layer.
To bake on up to three shelf positions at the same time
and to dry food. Set the temperature 20 - 40 °C lower
than for Top / Bottom Heat.
To add humidity during the cooking. To get the right
colour and crispy crust during baking. To give more
juiciness during reheating.
one shelf position. Also to make gratins and to brown.
ENGLISH 9
The lamp may automatically
deactivate at a temperature
below 60 °C during some
oven functions.
5.4 Activating the True Fan Cooking PLUS function
This function allows to have an
improvement of humidity during the
cooking.
WARNING!
Risk of burns and damage to
the appliance.
Released humidity can cause burns:
• Open the appliance door with care
after the True Fan Cooking PLUS
function stops.
Refer to “Hints and tips”
chapter.
1. Open the oven door.
2. Fill the cavity embossment with tap
water.
The maximum capacity of the cavity
embossment is 250 ml.
Fill the cavity embossment with water
only when the oven is cold.
3. Put food in the appliance and close
the oven door.
4. Set the True Fan Cooking PLUS
function:
.
5. Turn the knob for the temperature to
select a temperature.
CAUTION!
Do not refill the cavity
embossment with water
during cooking or when
the oven is hot.
6. To deactivate the appliance, turn the
knobs for the oven functions and
temperature to the off position.
7. Remove water from the cavity
embossment.
WARNING!
Make sure that the
appliance is cool before
you remove the
remaining water from
the cavity embossment.
5.5 Fast heat up function
The fast heat up function decreases the
heat up time.
Do not put food in the oven
when the Fast heat up
function operates.
1. Set the fast heat up function. Refer to
the Oven functions table.
2. Turn the knob for the temperature to
set the temperature.
A B C
D
EFG
www.aeg.com10
An acoustic signal sounds when the
appliance is at the set temperature.
The fast heat up function
does not deactivate after the
acoustic signal. You must
deactivate the function
manually.
3. Set an oven function.
5.6 Display
A. Timer
B. Heat-up and residual heat indicator
C. Water drawer (selected models only)
D. Core temperature sensor (selected
models only)
E. Door lock (selected models only)
F. Hours / minutes
G. Clock functions
5.7 Buttons
Button Function Description
CLOCK To set a clock function.
MINUS To set the time.
MINUTE MINDER To set the MINUTE MINDER. Hold the
button for more than 3 seconds to activate or deactivate the oven lamp.
PLUS To set the time.
TEMPERATURE To check the oven temperature or the
5.8 Heat-up indicator
When you activate an oven function, the
bars in the display come on one by
6. CLOCK FUNCTIONS
6.1 Clock functions table
Clock function Application
TIME OF DAY To show or change the time of day. You can change the
temperature of the core temperature sensor (if applicable). Use only while an oven
function is in operation.
one. The bars show that the oven
temperature increases or decreases.
time of day only when the appliance is off.
ENGLISH 11
Clock function Application
DURATION To set how long the appliance operates. Use only when
an oven function is set.
END To set when the appliance deactivates. Use only when
an oven function is set.
TIME DELAY Combination of DURATION and END function.
MINUTE MINDER Use to set a countdown time. This function has no ef-
fect on the operation of the appliance. You can set the
MINUTE MINDER at any time, also if the appliance is
off.
00:00 COUNT UP TIMER If you do not set any other clock function the COUNT
UP TIMER automatically monitor how long the appliance operates.
It is on immediately when the oven starts to heat.
The Count Up Timer cannot be used with the functions:
DURATION, END, core temperature sensor.
6.2 Setting and changing the time
After the first connection to the mains,
wait until the display shows
"12:00". "12" flashes.
1. Press
2. Press
the minutes.
The display shows
hour. "00" flashes.
3. Press
minutes.
4. Press
day will be saved automatically after
5 seconds.
The display shows the new time.
To change the time of day press
again and again until the indicator for the
time of day flashes in the display.
or to set the hours.
to confirm and switch to set
or to set the current
to confirm or the set time of
and
and the set
6.3 Setting the DURATION
1. Set an oven function.
2. Press again and again until
starts to flash.
3. Press or to set the minutes and
the hours for DURATION time.
4. Press
When the time ends an acoustic signal
sounds for 2 minutes.
setting flash in the display. The appliance
deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
to the off position.
to confirm.
and time
6.4 Setting the END
1. Set an oven function.
2. Press
starts to flash.
3. Press
the minutes for END time.
4. Press
At the set time an acoustic signal sounds
for 2 minutes.
in the display. The appliance deactivates
automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
to the off position.
again and again until
or to set the hours and
to confirm.
and time setting flash
6.5 Setting the TIME DELAY
function
1. Set an oven function.
www.aeg.com12
2. Press again and again until
starts to flash.
3. Press
the hours for DURATION time.
4. Press
shows flashing
5. Press
the minutes for END time.
6. Press
Appliance turns on automatically later
on, works for the set DURATION time
and stops at the set END time. At the set
time an acoustic signal sounds for 2
minutes.
display. The appliance deactivates.
7. Press any button to stop the acoustic
signal.
8. Turn the knob for the oven functions
to the off position.
or to set the minutes and
to confirm. The display
.
or to set the hours and
to confirm.
and time setting flash in the
6.6 Setting the MINUTE
MINDER
1. Press
.
7. USING THE ACCESSORIES
and "00" flash in the display.
2. Press
MINDER.
First you set the seconds, then the
minutes.
When the time you set is longer than
60 minutes,
3. Set the hours.
4. The MINUTE MINDER starts
automatically after 5 seconds.
After 90% of the set time, an acoustic
signal sounds.
5. When the set time ends, an acoustic
signal sounds for 2 minutes. "00:00"
and flash in the display. Press any
button to stop the acoustic signal.
or to set the MINUTE
flash in the display.
6.7 COUNT UP TIMER
To reset the Count Up Timer, press and
and . The timer starts to count
hold
up again.
WARNING!
Refer to Safety chapters.
7.1 Core temperature sensor
The core temperature sensor measures
temperature inside the food. When the
food is at the set temperature, the
appliance deactivates.
There are two temperatures to be set:
• the oven temperature (minimum 120
°C),
• the food core temperature.
CAUTION!
Use only the core
temperature sensor supplied
and the original replacement
parts.
Directions for the best results:
• Ingredients should be at room
temperature.
• Core temperature sensor cannot be
used for liquid dishes.
• During cooking the core temperature
sensor must remain in the dish and
the plug in the socket.
• Use recommended food core
temperature settings. Refer to "Hints
and tips" chapter.
Every time you put the core
temperature sensor in the
socket, you need to set the
core temperature time
again. You cannot select the
duration and end time.
The appliance calculates the
approximate cooking time, it
may change.
Loading...