AEG AGN2541 User Manual

AGN2541

FREEZER USER MANUAL 2

EN

CONGÉLATEUR NOTICE D'UTILISATION 18

FR

GEFRIERGERÄT BENUTZERINFORMATION 36

DE

CONGELATORE ISTRUZIONI PER L’USO 54

IT

2

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have
created it to give you impeccable performance for many
years, with innovative technologies that help make life
simpler – features you might not find on ordinary
appliances. Please spend a few minutes reading to get
the very best from it.

ACCESSORIES AND CONSUMABLES

In the AEG webshop, you’ll find everything you need to
keep all your AEG appliances looking spotless and
working perfectly. Along with a wide range of
accessories designed and built to the high quality
standards you would expect, from specialist cookware
to cutlery baskets, from bottle holders to delicate
laundry bags…

Visit the webshop at:
www.aeg-electrolux.com/shop

CONTENTS

Contents

4 Safety information
6 Control panel
9First use

9Daily use
10 Helpful Hints and Tips
11 Care and cleaning
12 What to do if…
14 Technical data
14 Installation
17 Environmental concerns

3

The following symbols are used in this
user manual:

Important information concerning
your personal safety and information
on how to avoid damaging the
appliance.

General information and tips

Environmental information

Subject to change without notice

Safety information

4

SAFETY INFORMATION

In the interest of your safety and to ensure the correct use, before installing and first
using the appliance, read this user manual carefully, including its hints and warnings. To
avoid unnecessary mistakes and accidents, it is important to ensure that all people using
the appliance are thoroughly familiar with its operation and safety features. Save these
instructions and make sure that they remain with the appliance if it is moved or sold, so
that everyone using it through its life will be properly informed on appliance use and safety.
For the safety of life and property keep the precautions of these user's instructions as the
manufacturer is not responsible for damages caused by omission.

Children and vulnerable people safety

• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

• Keep all packaging well away from children. There is risk of suffocation.

• If you are discarding the appliance pull the plug out of the socket, cut the connection
cable (as close to the appliance as you can) and remove the door to prevent playing
children to suffer electric shock or to close themselves into it.

• If this appliance featuring magnetic door seals is to replace an older appliance having
a spring lock (latch) on the door or lid, be sure to make that spring lock unusable be­fore you discard the old appliance. This will prevent it from becoming a death trap for
a child.

General safety

CAUTION!

Keep ventilation openings clear of obstruction.

• The appliance is intended for keeping foodstuff and/or beverages in a normal house­hold as explained in this instruction booklet.

• Do not use a mechanical device or any artificial means to speed up the thawing process.

• Do not use other electrical appliances (such as ice cream makers) inside of refrigerat­ing appliances, unless they are approved for this purpose by the manufacturer.

• Do not damage the refrigerant circuit.

• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the ap­pliance, a natural gas with a high level of environmental compatibility, which is never­theless flammable.

During transportation and installation of the appliance, be certain that none of the
components of the refrigerant circuit become damaged.

If the refrigerant circuit should become damaged:
– avoid open flames and sources of ignition
– thoroughly ventilate the room in which the appliance is situated

Safety information

• It is dangerous to alter the specifications or modify this product in any way. Any dam­age to the cord may cause a short-circuit, fire and/or electric shock.

WARNING!

Any electrical component (power cord, plug, compressor) must be replaced by a certified
service agent or qualified service personnel.

1. Power cord must not be lengthened.

2. Make sure that the power plug is not squashed or damaged by the back of the

appliance. A squashed or damaged power plug may overheat and cause a fire.

3. Make sure that you can come to the mains plug of the appliance.

4. Do not pull the mains cable.

5. If the power plug socket is loose, do not insert the power plug. There is a risk of

electric shock or fire.

6.

You must not operate the appliance without the lamp cover

1)

of interior lighting.

• This appliance is heavy. Care should be taken when moving it.

• Do not remove nor touch items from the freezer compartment if your hands are damp/
wet, as this could cause skin abrasions or frost/freezer burns.

• Avoid prolonged exposure of the appliance to direct sunlight.

•

Bulb lamps

2)

used in this appliance are special purpose lamps selected for household

appliances use only. They are not suitable for household room illumination.

Daily Use

• Do not put hot pot on the plastic parts in the appliance.

• Do not store flammable gas and liquid in the appliance, because they may explode.

•

Do not place food products directly against the air outlet on the rear wall.

• Frozen food must not be re-frozen once it has been thawed out.

• Store pre-packed frozen food in accordance with the frozen food manufacturer's in­structions.

• Appliance's manufacturers storage recommendations should be strictly adhered to. Re­fer to relevant instructions.

• Do not place carbonated or fizzy drinks in the freezer compartment as it creates pres­sure on the container, which may cause it to explode, resulting in damage to the appli­ance.

• Ice lollies can cause frost burns if consumed straight from the appliance.

5

3)

Care and cleaning

• Before maintenance, switch off the appliance and disconnect the mains plug from the
mains socket.

• Do not clean the appliance with metal objects.

• Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.

1) If the lamp cover is foreseen

2) If the lamp is foreseen

3) If the appliance is Frost Free

Control panel

6

Installation

For electrical connection carefully follow the instructions given in specific paragraphs.

• Unpack the appliance and check if there are damages on it. Do not connect the appli­ance if it is damaged. Report possible damages immediately to the place you bought
it. In that case retain packing.

• It is advisable to wait at least four hours before connecting the appliance to allow the
oil to flow back in the compressor.

• Adequate air circulation should be around the appliance, lacking this leads to overheat­ing. To achieve sufficient ventilation follow the instructions relevant to installation.

• Wherever possible the back of the product should be against a wall to avoid touching
or catching warm parts (compressor, condenser) to prevent possible burn.

• The appliance must not be located close to radiators or cookers.

• Make sure that the mains plug is accessible after the installation of the appliance.

•

Connect to potable water supply only.

4)

Service

• Any electrical work required to do the servicing of the appliance should be carried out
by a qualified electrician or competent person.

• This product must be serviced by an authorized Service Centre, and only genuine spare
parts must be used.

Environment Protection

This appliance does not contain gasses which could damage the ozone layer, in either its
refrigerant circuit or insulation materials. The appliance shall not be discarded together
with the urban refuse and rubbish. The insulation foam contains flammable gases: the
appliance shall be disposed according to the applicable regulations to obtain from your
local authorities. Avoid damaging the cooling unit, especially at the rear near the heat
exchanger. The materials used on this appliance marked by the symbol

CONTROL PANEL

1 2 3 4 5 6

1 ON/OFF button
2 Mode button
3 OK button
4 Temperature colder button
5 Temperature warmer button

4) If a water connection is foreseen

are recyclable.

Control panel

6 Display

It is possible to change predefined sound of buttons to a loudly one by pressing together
Mode button and Temperature colder button for some seconds. Change is reversible.

Display

3 4 5 621

1 Timer function

2 FROSTMATIC function

3 Minute Minder function

4 Child Lock function

5 Alarm indicator

6 Temperature indicator

Switching on

To switch on the appliance do these steps:

1. Connect the mains plug to the power socket.

2. Press the ON/OFF button if the display is off.

3. The alarm buzzer could operate after few seconds.

To reset the alarm refer to "High temperature alarm".

4. The temperature indicators show the set default temperature.
To select a different set temperature refer to "Temperature regulation".

7

Switching off

To switch off the appliance do these steps:

1. Press the ON/OFF button for 5 seconds.

2. The display switches off.

3. To disconnect the appliance from the power disconnect the mains plug from the pow-

er socket.

Temperature regulation

The set temperature of the freezer may be adjusted by pressing the temperature button.
Set default temperature:

• -18°C for the freezer
The temperature indicator shows the set temperature.
The set temperature will be reached within 24 hours.

After a power failure the set temperature remains stored.

FROSTMATIC function

To switch on the function:

1. Press the Mode button until the corresponding icon appears.

Control panel

8

The FROSTMATIC indicator flashes.
The freezer temperature indicator shows

2. Press the OK button to confirm.

The FROSTMATIC indicator is shown.

An animation starts.
This function stops automatically after 52 hours.
To switch off the function before its automatic end:

1. Press the Mode button until the FROSTMATIC indicator flashes.

2. Press the OK button to confirm.

3. The FROSTMATIC indicator goes off.
The function switches off by selecting a different freezer set temperature.

symbol.

Minute Minder function

The Minute Minder function is to be used to set an acoustic alarm at the preferred time,
useful for example when a recipe requires to cool down a mixture for a certain lenght of
time, or when a reminder is needed in order not to forget the bottles pleaced in the freez­er for fast cooling.
To switch on the function:

1. Press the Mode button until the corresponding icon appears.

The Minute Minder indicator flashes.

The Timer shows the set value (30 minutes) for a few seconds.

2. Press the Timer regulator button to change the Timer set value from 1 to 90 minutes.

3. Press the OK button to confirm.

The Minute Minder indicator is shown.

The Timer start to flash (min).
At the end of the countdown the Minute Minder indicator flashes and an audible alarm
sounds:

1. Remove any drinks contained in the freezer compartment.

2. Switch off the function.
To switch off the function:

1. Press the Mode button until the Minute Minder indicator flashes.

2. Press the OK button to confirm.

3. The Minute Minder indicator goes off.
It is possible to deactivate the function at any time.
It is possible to change the time at any time and before the end by pressing the Tempera­ture colder button and the Temperature warmer button.

Child Lock function

To lock the buttons from unintentional operation select the Child Lock function.
To switch on the function:

1. Press the Mode button until the corresponding icon appears.

2. The Child Lock indicator flashes.

3. Press the OK button to confirm.

The Child Lock indicator is shown.
To switch off the function:

1. Press the Mode button until the Child Lock indicator flashes.

2. Press the OK button to confirm.

3. The Child Lock indicator goes off.

High temperature alarm

An increase in the temperature in the freezer compartment (for example due to an earli­er power failure) is indicated by:

• flashing the alarm and freezer temperature indicators

• sounding of buzzer.
To reset the alarm:

1. Press any button.

2. The buzzer switches off.

3. The freezer temperature indicator shows the highest temperature reached for a few

seconds. Then show again the set temperature.

4. The alarm indicator continue to flash until the normal conditions are restored.
When the alarm has returned the alarm indicator goes off.

Door open alarm

An acoustic alarm will sound when the door is left open for around 80 seconds.
When normal conditions are restored (door closed), the acoustic alarm will stop.

First use

9

FIRST USE

Cleaning the interior

Before using the appliance for the first time, wash the interior and all internal accesso­ries with lukewarm water and some neutral soap so as to remove the typical smell of a
brand-new product, then dry thoroughly.

Do not use detergents or abrasive powders, as these will damage the finish.

DAILY USE

Freezing fresh food

The freezer compartment is suitable for freezing fresh food and storing frozen and deep­frozen food for a long time.
To freeze fresh food activate the FROSTMATIC function at least 24 hours before placing
the food to be frozen in the freezer compartment.
Place the fresh food to be frozen in the two top compartments.
The maximum amount of food that can be frozen in 24 hours is specified on the rating
plate , a label located on the inside of the appliance.

Helpful Hints and Tips

10

The freezing process lasts 24 hours: during this period do not add other food to be frozen.

Storage of frozen food

When first starting-up or after a period out of use, before putting the products in the
compartment let the appliance run at least 2 hours on the higher settings.

In the event of accidental defrosting, for example due to a power failure, if the power
has been off for longer than the value shown in the technical characteristics chart under
"rising time", the defrosted food must be consumed quickly or cooked immediately and
then re-frozen (after cooling).

Frozen Food Calendar

The symbols show different types of frozen goods.
The numbers indicate storage times in months for the appropriate types of frozen goods.
Whether the upper or lower value of the indicated storage time is valid depends on the
quality of the foods and treating before freezing.

Thawing

Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator com­partment or at room temperature, depending on the time available for this operation.
Small pieces may even be cooked still frozen, directly from the freezer: in this case, cook­ing will take longer.

Cold accumulators

One or more cold accumulators are supplied in the freezer; these increase the length of
time for which food will keep in the event of a power failure or breakdown.

HELPFUL HINTS AND TIPS

Hints for freezing

To help you make the most of the freezing process, here are some important hints:

• the maximum quantity of food which can be frozen in 24 hrs. is shown on the rating

plate;

• the freezing process takes 24 hours. No further food to be frozen should be added dur-

ing this period;

• only freeze top quality, fresh and thoroughly cleaned, foodstuffs;

• prepare food in small portions to enable it to be rapidly and completely frozen and to

make it possible subsequently to thaw only the quantity required;

• wrap up the food in aluminium foil or polythene and make sure that the packages are

airtight;

• do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding

a rise in temperature of the latter;

Care and cleaning

• lean foods store better and longer than fatty ones; salt reduces the storage life of food;

• water ices, if consumed immediately after removal from the freezer compartment, can

possibly cause the skin to be freeze burnt;

• it is advisable to show the freezing in date on each individual pack to enable you to

keep tab of the storage time.

Hints for storage of frozen food

To obtain the best performance from this appliance, you should:

• make sure that the commercially frozen foodstuffs were adequately stored by the re-

tailer;

• be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the

shortest possible time;

• not open the door frequently or leave it open longer than absolutely necessary.

• Once defrosted, food deteriorates rapidly and cannot be refrozen.

• Do not exceed the storage period indicated by the food manufacturer.

CARE AND CLEANING

CAUTION!

Unplug the appliance before carrying out any maintenance operation.

This appliance contains hydrocarbons in its cooling unit; maintenance and recharging
must therefore only be carried out by authorized technicians.

11

Periodic cleaning

The equipment has to be cleaned regularly:

• clean the inside and accessories with lukewarm water and some neutral soap.

• regularly check the door seals and wipe clean to ensure they are clean and free from

debris.

• rinse and dry thoroughly.
Do not pull, move or damage any pipes and/or cables inside the cabinet.

Never use detergents, abrasive powders, highly perfumed cleaning products or wax pol­ishes to clean the interior as this will damage the surface and leave a strong odour.

Clean the condenser (black grill) and the compressor at the back of the appliance with a
brush or a vacuum cleaner. This operation will improve the performance of the appliance
and save electricity consumption.

Take care of not to damage the cooling system.

Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the
plastics used in this appliance. For this reason it is recommended that the outer casing of
this appliance is only cleaned with warm water with a little washing-up liquid added.
After cleaning, reconnect the equipment to the mains supply.

What to do if…

12

Defrosting of the freezer

The freezer compartment of this model, on the other hand, is a "no frost" type. This
means that there is no buildup of frost when it is in operation, neither on the internal
walls nor on the foods.
The absence of frost is due to the continuous circulation of cold air inside the compart­ment, driven by an automatically controlled fan.

Periods of non-operation

When the appliance is not in use for long periods, take the following precautions:

•

disconnect the appliance from electricity supply

• remove all food

defrost

5)

and clean the appliance and all accessories

•

• leave the door/doors ajar to prevent unpleasant smells.
If the cabinet will be kept on, ask somebody to check it once in a while to prevent the
food inside from spoiling in case of a power failure.

WHAT TO DO IF…

WARNING!

Before troubleshooting, disconnect the mains plug from the mains socket.
Only a qualified electrician or competent person must do the troubleshooting that is not
in this manual.

There are some sounds during normal use (compressor, refrigerant circulation).

Problem Possible cause Solution

The appliance does not op­erate. The Pilot light does
not flash.

The mains plug is not connec-

The appliance has no power.

The Pilot light flashes.

The Alarm light flashes.

The compressor operates
continually.

The door is not closed correctly. Refer to "Closing the door".

5) If foreseen.

The appliance is switched off. Switch on the appliance.

ted to the mains socket correct­ly.

There is no voltage in the mains
socket.

The appliance is not working
properly.

The temperature in the freezer
is too high.

The temperature is not set cor­rectly.

Connect the mains plug to the
mains socket correctly.

Connect a different electrical ap­pliance to the mains socket.
Contact a qualified electrician.

Contact a qualified electrician.

Refer to "High temperature
alarm"

Set a higher temperature.

What to do if…

Problem Possible cause Solution

The door has been opened too

The product temperature is too

The room temperature is too

The FROSTMATIC function is

The temperature in the
freezer is too low.

The FROSTMATIC function is

The temperature in the
freezer is too high.

The door is not closed correctly. Refer to "Closing the door".
The product temperature is too

Many products are stored at

Products are too near to each

A large quantity of drops
ice covers the top com­partment inside the appli­ance.

frequently.

high.

high.

switched on.
The temperature regulator is

not set correctly.

switched on.
The temperature regulator is

not set correctly.

high.

the same time.

other.
There is too much frost and ice

on the evaporator of the appli­ance, the door was open for
too long time.

Do not keep the door open lon­ger than necessary.

Let the product temperature de­crease to room temperature be­fore storage.

Decrease the room temperature.

Refer to "FROSTMATIC function".

Set a higher temperature.

Refer to "FROSTMATIC function".

Set a lower temperature.

Let the product temperature de­crease to room temperature be­fore storage.

Store less products at the same
time.

Store products so that there is
cold air circulation.

Refer to "Cleaning the evapora­tor".

13

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to "Installation".

3. If necessary, replace the defective door gaskets. Contact the Service Center.

Cleaning the evaporator

1. Switch off the appliance.

2. Disconnect the mains plug from the mains socket.

3. Remove all foods from the freezer and put them in a fresh place.

4. Move the appliance far from the wall.

5. Leave the door open.

6. After approximately 20 minutes the drain hose at the rear of the cabinet starts to

discharge water into the drip tray.

Technical data

14

7. To prevent the water overflowing from

the drip tray dry with a sponge.

8. The defrosting process ends when the

water stops dripping. It may take sever­al hours if the problem started long be­fore.

9. Move the appliance to the original po-

sition.

10. Clean and dry the inside of the appli-

ance.

11. Connect the mains plug into the mains

socket.

12. Switch on the appliance.

TECHNICAL DATA

Dimension of the recess
Height 1800 mm
Width 600 mm
Depth 650 mm
Rising Time 20 h

The technical information are situated in the rating plate on the internal left side of the
appliance and in the energy label.

INSTALLATION

WARNING!

Read the "Safety Information" carefully for your safety and correct operation of the ap­pliance before installing the appliance.

Installation

Location

The appliance should be installed well away from
sources of heat such as radiators, boilers, direct
sunlight etc. Ensure that air can circulate freely
around the back of the cabinet. To ensure best
performance, if the appliance is positioned be­low an overhanging wall unit, the minimum dis­tance between the top of the cabinet and the
wall unit must be at least 100 mm . Ideally, how­ever, the appliance should not be positioned be­low overhanging wall units. Accurate levelling is
ensured by one or more adjustable feet at the
base of the cabinet.
If the cabinet is placed in a corner and the side
with the hinges facing the wall, the distance be­tween the wall and the cabinet must be at least 10 mm to allow the door to open
enough so that the shelves can be removed.

WARNING!

It must be possible to disconnect the appliance from the mains power supply; the plug
must therefore be easily accessible after installation.

10mm 100mm

Positioning

WARNING!

If you are discarding an old appliance that has a lock or catch on the door, you must
ensure that it is made unusable to prevent young children being trapped inside.

15

10mm

The appliance shall have the plug accessible after installation.

Install this appliance at a location where the ambient temperature corresponds to the
climate class indicated on the rating plate of the appliance:

Climate class Ambient temperature

SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the rating plate cor­respond to your domestic power supply.
The appliance must be earthed. The power supply cable plug is provided with a contact
for this purpose. If the domestic power supply socket is not earthed, connect the appli­ance to a separate earth in compliance with current regulations, consulting a qualified
electrician.

Installation

16

The manufacturer declines all responsibility if the above safety precautions are not ob­served.
This appliance complies with the E.E.C. Directives.

Rear spacers

Inside the appliance you find two spacers
which must be fitted as shown in the figure.

Slacken the screws and insert the spacer under
the screw head, then retighten the screws.

Door reversibility

WARNING!

Before carrying out any operations, remove the plug from the power socket.

To carry out the following operations, we suggest that this be made with another person
that will keep a firm hold on the door of the appliance during the operations. Gently lay
the appliance on its back.
To change the opening direction of the door, do these steps:

1. Remove the clip-in ventilation grille, remove the plug (e) from the ventilation grille
and install it on the opposite side.

2. Remove the bottom hinge (A) by un­screwing the fixing screws.

3. Remove the door.

4. Unscrew the pin (f) of the bottom
hinge and install it on the opposite side.

A

f

A

e

Environmental concerns

5. Unscrew the pin of the upper hinge
and install it on the opposite side.

6. Install the door in the upper hinge.

7. Install the ventilation grille, clipping it
into place.

8. Unscrew the handle. Remove the plug
with a punch. Install the handle and
the plug on opposite side. Take from
the accessory bag the two plugs and
cover the holes left open after having
removed the handle.

9. Make sure that the front board of the
door is parallel to the front board of
the top.

10. Reposition, level the appliance, wait for
at least four hours and then connect it
to the power socket.

Do a final check to make sure that:

• All screws are tightened.

• The magnetic seal adheres to the cabinet.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of the gasket.

180°

17

ENVIRONMENTAL CONCERNS

The symbol on the product or on its packaging indicates that this product may not
be treated as household waste. Instead it should be taken to the appropriate collection
point for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed information about recycling of this
product, please contact your local council, your household waste disposal service or the
shop where you purchased the product.

18

POUR DES RÉSULTATS PARFAITS

Merci d'avoir choisi ce produit AEG. Nous l'avons créé
pour vous offrir la meilleure performance pour une
longue durée, avec des technologies innovantes qui
vous simplifient la vie - autant de caractéristiques que
vous ne trouverez pas sûrement pas sur d'autres
appareils. Veuillez prendre quelques instants pour lire
cette notice afin d'utiliser au mieux votre appareil.

ACCESSOIRES ET CONSOMMABLES

Dans la boutique en ligne d'AEG, vous trouverez tout ce
qu'il vous faut pour que vos appareils AEG fonctionnent
parfaitement. Sans oublier une vaste gamme
d'accessoires conçus et fabriqués selon les critères de
qualité les plus élevés qui soient, des articles de cuisine
spécialisés aux range-couverts, des porte-bouteilles aux
sacs à linge délicats...

Visitez la boutique en ligne sur
www.aeg-electrolux.com/shop

SOMMAIRE

Sommaire

20 Consignes de sécurité
23 Bandeau de commande
26 Première utilisation
26 Utilisation quotidienne
27 Conseils
28 Entretien et nettoyage
29 En cas d'anomalie de

fonctionnement
31 Caractéristiques techniques
31 Installation
34 En matière de sauvegarde de

l'environnement

19

Les symboles suivants sont utilisés
dans ce manuel:

Informations importantes pour votre
sécurité et pour éviter d’abîmer
l’appareil.

Informations générales et conseils

Informations écologiques

Sous réserve de modifications

Consignes de sécurité

20

CONSIGNES DE SÉCURITÉ

Pour votre sécurité et garantir une utilisation correcte de l'appareil, lisez attentivement
cette notice, y compris les conseils et avertissements, avant d'installer et d'utiliser l'appa­reil pour la première fois. Pour éviter toute erreur ou accident, veillez à ce que toute per­sonne qui utilise l'appareil connaisse bien son fonctionnement et ses fonctions de sécu­rité. Conservez cette notice avec l'appareil. Si l'appareil doit être vendu ou cédé à une
autre personne, veillez à remettre cette notice au nouveau propriétaire, afin qu'il puisse
se familiariser avec son fonctionnement et sa sécurité.
Pour la sécurité des personnes et des biens, conservez et respectez les consignes de sécu­rité figurant dans cette notice. Le fabricant décline toute responsabilité en cas de dom­mages dus au non-respect de ces instructions.

Sécurité des enfants et des personnes vulnérables

• Cet appareil n'est pas destiné à être utilisé par des enfants ou des personnes dont les
capacités physiques, sensorielles ou mentales, ou le manque d'expérience et de con­naissance les empêchent d'utiliser l'appareil sans risque lorsqu'ils sont sans surveillan­ce ou en l'absence d'instruction d'une personne responsable qui puisse leur assurer
une utilisation de l'appareil sans danger.

Empêchez les enfants de jouer avec l'appareil.

• Ne laissez pas les différents emballages à portée des enfants. Ils pourraient s'asphyxier.

• Si l'appareil doit être mis au rebut, veillez à couper le câble d'alimentation électrique
au ras de l'appareil pour éviter les risques d'électrocution. Démontez la porte pour évi­ter que des enfants ne restent enfermés à l'intérieur.

• Cet appareil est muni de fermetures magnétiques. S'il remplace un appareil équipé
d'une fermeture à ressort, nous vous conseillons de rendre celle-ci inutilisable avant
de vous en débarrasser. Ceci afin d'éviter aux enfants de s'enfermer dans l'appareil et
de mettre ainsi leur vie en danger.

Mesures générales de sécurité

ATTENTION

Veillez à ce que les orifices de ventilation ne soient pas obstrués.

• Cet appareil est destiné uniquement à la conservation d’aliments et/ou de boissons
dans le cadre d’un usage domestique normal, tel que celui décrit dans la présente notice.

• N'utilisez pas d'appareils électriques, d'agents chimiques ou tout autre système artifi­ciel pour accélérer le processus de dégivrage.

• N’utilisez pas d'autres appareils électriques (par exemple, sorbetières) à l'intérieur d’ap­pareils réfrigérants sauf s’ils sont homologués pour cet usage par leur fabricant.

• Faites très attention lorsque vous déplacez l'appareil afin de ne pas endommager des
parties du circuit de refroidissement et ainsi d'éviter des risques de fuite.

• Le circuit de refroidissement de l’appareil contient de l’isobutane (R600a), un gaz natu­rel offrant un haut niveau de compatibilité avec l’environnement mais qui est néan­moins inflammable.

Consignes de sécurité

21

Pendant le transport et l'installation de l’appareil, assurez-vous qu'aucune pièce du cir­cuit de refroidissement n'est endommagée.

Si tel est le cas :
– Évitez les flammes vives (briquet) et tout autre allumage (étincelles).
– Aérez soigneusement la pièce où se trouve l'appareil.

• Ne modifiez pas les spécifications de l'appareil. Un cordon d'alimentation endommagé
peut être la cause de courts-circuits, d'incendies et/ou de décharges électriques.

AVERTISSEMENT

Les composants électriques (cordon d'alimentation, prise, compresseur) doivent être rem­placés par un technicien d’entretien agréé ou par un électricien spécialisé.

1. L'appareil ne doit pas être raccordé à l'aide d'un prolongateur, d'une prise multiple

ou d'un raccordement multiple (risque d'incendie).

2. Assurez-vous que la prise n'est pas écrasée ou endommagée par l'arrière de l'appa-

reil. Une prise de courant endommagée peut surchauffer et provoquer un incendie.

3. Vérifiez que la prise murale reste accessible une fois que l'installation est terminée.

4. Ne débranchez pas l'appareil en tirant sur le câble, particulièrement lorsque l'appa-

reil est tiré de son logement.

5. Si la fiche du cordon d'alimentation est desserrée, ne la branchez pas dans la prise

murale. Risque d'électrocution ou d'incendie !

6.

N'utilisez pas l'appareil si le diffuseur de l'ampoule d'éclairage n'est pas présent

6)

pour l'éclairage intérieur.

• Cet appareil est lourd. Faites attention en le déplaçant.

• Ne touchez pas avec les mains humides les surfaces givrées et les produits congelés
(risque de brûlure et d'arrachement de la peau).

• Évitez une exposition prolongée de l'appareil aux rayons solaires.

•

Ampoules

7)

utilisées dans cet appareil sont des ampoules spéciales dédiées unique­ment à un usage avec des appareils ménagers. Elles ne conviennent pas à l'éclairage
des pièces d'une habitation.

Utilisation quotidienne

• Ne posez pas d'éléments chauds sur les parties en plastique de l'appareil.

• Ne stockez pas de gaz ou de liquides inflammables dans l'appareil (risque d'explosion).

• Ne placez pas d'aliments directement contre la sortie d'air sur la paroi arrière de l'ap-

• Un produit décongelé ne doit jamais être recongelé.

• Conservez les aliments emballés conformément aux instructions de leur fabricant.

• Respectez scrupuleusement les conseils de conservation donnés par le fabricant de l'ap-

6) Si le diffuseur est prévu.

7) Si l'ampoule est prévue.

8) Si l'appareil est sans givre.

8)

pareil.

pareil. Consultez les instructions respectives.

Consignes de sécurité

22

• Ne mettez pas de bouteilles ni de boîtes de boissons gazeuses dans le compartiment
congélateur, car la pression se formant à l'intérieur du contenant pourrait le faire écla­ter et endommager ainsi l'appareil.

• Ne consommez pas certains produits tels que les bâtonnets glacés dès leur sortie de
l'appareil, car ils peuvent provoquer des brûlures.

Entretien et nettoyage

• Avant tout entretien, mettez l'appareil à l'arrêt et débranchez-le. Si vous n'avez pas
accès à la prise, coupez le courant.

• N'utilisez pas d'objets métalliques pour nettoyer l'appareil.

• N'utilisez pas d'objet tranchant pour gratter la couche de givre. N'employez pour cela
qu'une spatule en plastique.

Installation

Avant de procéder au branchement électrique, respectez scrupuleusement les instruc­tions fournies dans cette notice.

• Déballez l'appareil et vérifiez qu'il n'est pas endommagé. Ne branchez pas l'appareil s'il
est endommagé. Signalez immédiatement au revendeur de l'appareil les dommages
constatés. Dans ce cas, gardez l'emballage.

• Il est conseillé d'attendre au moins quatre heures avant de brancher l'appareil pour
que le circuit frigorifique soit stabilisé.

• Veillez à ce que l'air circule librement autour de l'appareil pour éviter qu'il ne surchauf­fe. Pour assurer une ventilation suffisante, respectez les instructions de la notice (cha­pitre Installation).

• Placez l'appareil dos au mur pour éviter tout contact avec le compresseur et le conden­seur (risque de brûlure).

• Placez de préférence votre appareil loin d'une source de chaleur (chauffage, cuisson
ou rayons solaires trop intenses).

• Assurez-vous que la prise murale reste accessible après l'installation de l'appareil.

•

Branchez à l'alimentation en eau potable uniquement.

9)

Maintenance

• Les branchements électriques nécessaires à l'entretien de l'appareil doivent être réali­sés par un électricien qualifié ou une personne compétente.

• Cet appareil ne doit être entretenu et réparé que par un Service après-vente autorisé,
exclusivement avec des pièces d'origine.

9) Si un branchement sur le réseau d'eau est prévu.