![](/html/6f/6f17/6f17fd5c61910848198fe505d93942d41f8cfc0f79d69e490cd99cc9d0baf2fc/bg3.png)
English
Thank you for choosing an AEG Ergorapido vacuum
cleaner. Ergorapido is a rechargeable handheld
stick vacuum cleaner intended for use on light dry
household debris. In order to ensure the best results,
always use original AEG accessories. They have been
designed especially for your vacuum cleaner.
Table of contents
Unpacking and assembly ......................4
Charging ...................................5
Vacuuming ..................................6
Emptying and cleaning ........................7
Cleaning brush roll, hose and wheels .............8
Removing the batteries .......................10
Safety precaution ...........................11
Consumer information ........................11
Features/Accessories
1 On/off button
2 On/off button, hand unit
3 Handle
4 Locking screw
5 Release button, hand unit
6 Charging station, wall unit
7 Charging station, floor unit
8 Adaptor
9 Fine filter (inner filter)
10 Pre filter (outer filter)
11 Release button, dust container
12 Battery display, Lithium version*
13 Dust container
14 Vacuum cleaner lid
15 Brush
16 Crevice nozzle
17 Brush roll release button*
18 Hatch cover for brush roll*
19 Brush roll
20 BRUSHROLLCLEAN™ TECHNOLOGY button*
21 Nozzle front lights
22 Charging indicator, NiMH version*
23 Parking strip
3Content
* Certain models only
![](/html/6f/6f17/6f17fd5c61910848198fe505d93942d41f8cfc0f79d69e490cd99cc9d0baf2fc/bg4.png)
4
Unpacking and assembly
Unpacking and assembly
1. Check that all parts are in the box. Fit the handle
by carefully inserting it into the lower main body.
Make sure that the cable does not jam.
Charging station
1. Position the charging station well away from
heat sources, direct sunlight or wet places. Insert
the adaptor into the mains and connect it to the
charging station.
2. Secure the handle by tightening the locking screw
supplied. Use a screwdriver or a coin.
2. On the bottom of the charging station there is a
hollow space where unused cable can be wound.
3. The wall unit can also be mounted on a wall.
Separate it from the floor unit. Always ensure that
the wall can withstand the weight of Ergorapido.