Page 1
Precision Weighing Sensor
AD
-
4212A
series
ISO
9000
Super Hybrid Sensor
CERTIFIED
http://www.aandd.jp
Page 2
High speed response of 0.8 seconds and
high precision weighing resolution of
0.1mg using Super Hybrid Sensor (SHS)
technology for an extremely effective
weighing system!
To improve productivity, you can create your own weighing system using the AD-4212A
Precision Weighing Sensor.
The compact design, as well as the separate weighing unit and display unit, ensure easy
installation of the SHS at any stage of your weighing system.
High speed weighing response time
The SHS ( Super Hybrid Sensor) offers a high speed weighing response time of approximately 0.8 seconds for 1mg
weighing sensitivity and approximately 1.1 seconds for 0.1mg weighing sensitivity.
High resolution and capacity
Available models include 110g x 0.1mg, 210g x 1mg, 610g x 1mg and 1100g x 1mg.
Compact design
The weighing sensor unit is extremely compact ( 80 x 230 x 90 mm ) and ideal for easy installation with weighing systems.
Separate weighing sensor unit and display unit
The weighing sensor unit and display unit are connected with a cable 2m in length. An optional 3m c able ( OP-07 )
makes a maximum length of 5m possible for diverse applications. ( Can be extended further with RS-232C. )
It is easy to install the display unit into the panel of the control box providing easy operation and space economization.
Comparator function and Buzzer function
A three-level comparator output (HI, OK or LO indicator) with I /O, as well as a Buzzer function, provide a simple and
easy design solution for any precise weighing system.
External input function
The Re-Zero and Print key function can be controlled externally using the I/O D-Sub 25-pin connector.
Auto Power ON and OFF function
When the balance is plugged in, the ON function is automatically displayed. The OFF function will activate
automatically if the balance is not operated for 10 minutes.
Auto Zero display after data output
Possible to set the display to automatically adjust to Zero after weight data is output.
Full Digital Calibration function
Simple and easy to calibrate with standard calibration mass for weighing accuracy.
Response Speed setting function
Function available to select optimum response speed from FAST, MID or SLOW.
WinCT software
Windows Communication Tools ( WinCT) software for the high-speed transmission of weight dat a to a PC, and the abilit y to control the
AD-4212A by sending commands.
Data memory function
Capable of storing any of the following; 200 weight measurements, 100 weight measurements with time & date, 50 calibration &
calibration test measurements, 20 unit weight measurements for counting mode or 20 comparator setting limits values.
RS-232C
Standard interface function of bi-directional RS-232C for weighing data transmission and control of the AD-4212A.
Ethernet interface
Optional Ethernet interface (OP-08) for high-speed weight data transmission and multi-weighing lines application.
( Comes with application software WinCT-plus in CD-ROM. )
Page 3
AD
-
4212A
Applications
(Wall mounting)
High speed weighing
Check-weighing
Precise dispensing
Isolated weighingPrecise weight filling
Self-check function
Easy to evaluate the performance of the AD-4212A.
“CLr” Clear function
Returns to original factory settings for calibration data, function table, comparator value and data memory.
Bubble spirit level and adjustable leveling foot
Easy to level the weighing sensor unit for more accurate weighing applications.
Capacity indicator
Possible to read capacity being weighed from 0% to 100% of weighing range.
Durable weighing sensor unit and display unit
Aluminum die casting case coated with strong paint, which even protects from hydrogen peroxide.
Multi weighing units
Possible to use weighing unit incorporating counting mode with ACAI (Automatic Counting Accuracy Improvement) and Percent mode.
Designing the special weighing pan Please refer to the examples of weighing pans the end user can custom-design.
Using the pan support
The example below is showing you a custom-designed weighing
pan so that it can fit to the pan support.
Center
M3 flat head screw: length 5 mm or less
38mm
38mm
Four points on the peripheral
M3 screw: length 5 mm or less
Special weighing pan (Example)
Pan support
AD-4212A-100/200
Weighing pan 50x50mm
AD-4212A-600/1000
Weighing pan 70x70mm
Weighing unit
Pan support plate
Using the pan boss
You can remove the pan support and use the pan boss so that your
custom-designed pan can be used.
Approx. 17.8 mm
Pan support
(Can be removed.)
Front
Back
Pan boss
(Cannot be removed.)
Weighing unit
Approx. φ 16mm
5
5
Three points
M3 screw: length 5 mm or less
7.5mm
φ 19.5mm
30
Special weighing pan
(Example)
Weighing unit
Page 4
Dimensions(mm/inch)
A
B
62/2.44
Specifications
Models
Weighing capacity
Minimum weighing value
Counting mode Minimum unit mass
Number of samples
Minimum
Percent mode
Repeatability (Standard deviation)
Linearity
Stabilization time
(TYP at FAST response under good environment)
Display refresh rate
I/O unit RS-232C
Comparator contact output
External contact input
Sensitivity drift
Operating environment
Calibration weight provided
(Conforming to OIML Class F1)
Applicable calibration weight value
Weighing Unit Dimensions
Weighing pan
Weight
Display Unit Dimensions
Weight
Connection cable
Power supply
Power consumption
100% reference mass
Minimum 100% display
25/0.98
A
176/6.93
90/3.54
45/1.77
AD-4212A-100
110g
0.0001g
0.0001g
0.0100g
0.00015g
±0.0003g
0 to 30g Approx. 1.1sec
30 to 110g Approx. 1.3sec
50g
20g, 50g, 100g
50 x 50 mm
0 to 30g Approx. 0.8sec
30g to 210g Approx. 1.0sec
230/9.06
80/3.15
9/0.35
Model
AD-4212A-100/200
AD-4212A-600/1000
AD-4212A-200
210g
10, 25, 50 or 100 pieces
0.01%, 0.1%, 1% (Depends on the reference mass stored)
±0.002g
10 times/second (5 times/second can be selected)
±2 ppm/°C (10°C to 30°C/50°F to 86°F)
5°C to 40°C (41°F to 104°F), 85%RH or less (no condensation)
100g
20g, 50g, 100g, 200g
Approx. 2m (between weighing unit and display unit)
Approx.11VA (supplied to the AC adaptor)
±0.003g
Bi-directional, 600-19200 bps
3-level output with buzzer
RE-ZERO, PRINT
80(W) x 230(D) x 90(H) mm
70 x 70 mm
Approx. 2kg
237(W) x 150(D) x 155(H) mm
Approx. 2kg
AC adaptor
AD-4212A-600
0 to 30g Approx. 0.9sec
30g to 610g Approx. 1.1sec
200g
20g, 50g, 100g, 200g,
A
50 / 1.97
70 / 2.76
610g
0.001g
0.001g
0.100g
0.001g
400g, 500g, 600g
Specif icat ions subjec t to change for improvement without notice.
(mm/inch)
B
90(85-95) / 3.54(3.35-3.74)
92.5(87.5-97.5) / 3.64(3.44-3.84)
AD-4212A-1000
1100g
0 to 30g Approx. 0.9sec
30g to 1100g Approx. 1.1sec
20g, 50g, 100g, 200g, 300g, 400g,
500g, 600g, 700g, 800g, 900g, 1000g
Options
Accessories AD-8121B
AD4212A-01
AD4212A-07
AD4212A-08
AD4212A-19
AD4212A-20
AD-8118B
AD-8951
AD-1683EX
BCD output / External contact input
Extension cable (3m)
Ethernet interface (With application software WinCT-plus in CD-ROM)
Stainless steel breeze break ( Standard for AD-4212A-100 )
Metal leveling foot
Compact Printer
Journal Printer
Comparator Light
Static Eliminator
...Clearly a Better Value
3-23-14 Higashi-lkebukuro, Toshima-ku,Tokyo 170-0013 JAPAN
Telephone:[81](3) 5391-6132 Fax:[81](3) 5391-6148
http://www.aandd.jp
1555 McCandless Drive, Milpitas, CA. 95035 U.S.A.
Telephone:[1](408) 263-5333 Fax:[1](408) 263-0119
32 Dew Street, Thebarton, South Australia 5031 AUSTRALIA
Telephone:[61](8) 8301-8100 Fax:[61](8) 8352-7409
AD-8121B AD-8951 AD-1683EX
Unit 24/26 Blacklands Way Abingdon Business Park,
Abingdon, Oxon OX14 1DY United Kingdom
Telephone:[44](1235) 550420 Fax:[44](1235) 550485
<German Sales Office>
Große Straße 13 b 22926 Ahrensburg GERMANY
Telephone:[49](0) 4102 459230 Fax:[49](0) 4102 459231
Manhattan Bldg. 8F, 36-2 Yoido-dong, Youngdeungpo-gu, Seoul, KOREA
Telephone:[82](2) 780-4101 Fax:[82](2) 782-4280
AD4212A-ADCC-01-PR1-05b05
*
Loading...