Advent TOYBTSW2 User Manual

TOYBTSW2

Owner's Manual

Bluetooth Hands Free Vehicle Kit

IMPORTANTNOTE: The operation of the Bluetooth Hands Free Kit as described in this manual is

applicable to most phones. However, due to the configurationof some phones, some functions may not

apply. Pleasesee your installing dealer for more information.

1

Using Your Bluetooth Hands Free Kit

Powering On/Off

The bluetooth kit will automatically turnonwhenthe vehicle’s key is turned to the accessorypositionand will remain on
until the vehicle’s accessory poweris turned off. Afterturning on, the bluetooth kit willautomatically search for phonesthat
havebeen pairedwith it. Since it is possible to have multiple phones pairedto the systemthe orderof priority of
connecting willbe the latest phonepaired, the phone mostused withthesystem, the phone secondmostusedphonewith
thesystem.Ifthebluetooth kit hasnotbeen paired to aphonepairingwill automatically activate.

Making a Call

When connected to thebluetoothkit you mayuse your phone as normal to dial numbers or search your contacts list
or by using Voice Dialing.

Voice Dialing

To activate voice dialing press the ANSWER key onthe bluetooth keypad, the system will prompt you fora command.
Clearly speak your command (example, “Call Shaun”). Thesystem will then confirmthe command and in this
example will then call “Shaun”.

Ending a Call

To end a call press and hold the END key for 2 seconds.

Answer a Call

When there is an incoming call the vehicle’s radio will be muted/turned off and the call will ring through the
vehicle’s speaker, to answer press theANSWER key.

Ignore an Incoming Call

To Ignore an incoming call press and hold the END key.

Redial the Last Number

To redial the last number press and hold theANSWER key for 2 seconds.

Adjusting the Call Volume

While in a call, adjust the volume up/down with theANSWER key or END key, each press raises or lowers the
volume by 1 level. When themin/maxvolumeis reached the system will beep 2times throughthe speaker.

Transfer a Call

To transfer a call between bluetooth hands free or normal phoneoperation press and hold the ANSWER key onthe
bluetooth keypad for 2 seconds.

Pairing

To activate phone pairing press and hold both theANSWER and ENDkeys at the same time for3 seconds.At this
time you will need to activate pairing on the phone,see your phones owners manual. The PIN code for pairing is 1234
andwill need to be entered into yourphone at the time of pairing.

*Throughout this manual, ‘press’ refers to pressing for less than 1 second, ‘press and hold’ refers to pressing for 2
seconds.

2

Using Your Bluetooth Hands Free Kit, continued

SETONNOTTUBDAPYEKNOITCNUF

NOyrosseccaelcihevnruT-pUtinUrewoP

lamronsaenohpesU-llaCAekaM

esaelerdnasserPREWSNAllaCrewsnA

dnoces2rofdlohdnasserPDNEllaCdnE

esaelerdnasserPREWSNAgnilaiDecioV

Redial Last Number ANSWER Press and hold for 2 seconds

sdnoces2rofdlohdnasserPREWSNAllaCrefsnarT

esaelerdnasserPDNEllaCerongI

Volume ANSWER OR END Press and release

sdnoces3rofdlohdnasserPDNE+REWSNAgniriaP

esaelerdnasserPREWSNAhcraeSlaunaM

sdnoces01rofrehtegotsserPDNE+REWSNAteseR

sdnoces5rofdlohdnasserPDNEhtooteulBtcennocsiD

Quick Reference Guide - 2 Button Switch

Y

Manual Search for Paired Phone

If your phone isnot connectedto or hasbeen disconnected by you from the bluetooth kit buthas previouslybeen
paired to the systemyou can activate themanual search which will locateyour phone and connect to it. To activate a
manual search press the ANSWER key.

Reset / Clear All P aired Phones

To permanently removeall paired phones from the bluetooth kit press and hold both theANSWER and END keys
together for 10 seconds.

Quick Reference

s

ANSWER KE

END KEY

3