Advent NISBTSW2 User Manual

1

IMPORTANTNOTE: The operation of the Bluetooth Hands Free Kit as described in this manual is

applicable to most phones. However, due to the configuration of some phones, some functions may not

apply. Please see your installing dealer for more information.

Owner's Manual

NISBTSW2

Bluetooth Hands Free Vehicle Kit

Using Your Bluetooth Hands Free Ki t

Powering On/Off

The bluetooth kit willautomaticallyturnon when the vehicle’s key is turnedto the accessoryposition andwill remain on
until the vehicle’saccessory poweris turned off.After turning on, the bluetoothkitwillautomatically searchfor phonesthat
havebeen pairedwith it. Since it is possible to have multiple phonespaired tothe system theorder of priorityof
connectingwill be thelatestphonepaired, the phone most used withthe system, the phonesecondmost usedphonewith
thesystem. If the bluetooth kit hasnotbeen paired toa phone pairingwill automatically activate.

Making a Call

When connected to thebluetoothkit you may use your phone as normal to dial numbers or search your contacts list
or by using Voice Dialing.

Voice Dialing

To activate voice dialing press the ANSWER key on the bluetooth keypad, the system will promptyou for a command.
Clearly speak your command (example, “Call Shaun”). The system will then confirm the command andin this
example will then call “Shaun”.

Ending a Call

To end a call press and hold the END key for 2 seconds.

Answer a Call

When there is an incoming call the vehicle’s radio will be muted/turned off and the call will ring through the
vehicle’s speaker, to answer presstheANSWER key.

Ignore an Incoming Call

To Ignore an incoming call press and hold the END key.

Redial the Last Number

To redial the last number press and hold the ANSWER key for 2 seconds.

Adjusting the Call Volume

While in a call, adjust the volume up/down with the ANSWER key or END key,each press raises or lowers the
volume by 1 level.When the min/maxvolumeis reached the system will beep 2 times through the speaker.

Transfer a Call

To transfer a call between bluetooth hands free or normalphone operation press and hold the ANSWER key on
the

bluetooth keypad for2 seconds.

Pairing

To activate phone pairing press and hold the END key for 10 seconds. At this time you will need to activate pairing
on the phone, see yourphones owners manual. The PIN codeforpairingis 1234 and willneedto be enteredinto your
phone at the time of pairing.

*Throughout this manual, ‘press’ refers to pressing for less than 1 second, ‘press and hold’ refers to pressing for 2
seconds.

2

Using Your Bluetooth Hands Free Kit, continued

SETONNOTTUBDAPYEKNOITCNUF

NOyrosseccaelcihevnruT-pUtinUrewoP

lamronsaenohpesU-llaCAekaM

esaelerdnasserPREWSNAllaCrewsnA

sdnoces2rofdlohdnasserPDNEllaCdnE

esaelerdnasserPREWSNAgnilaiDecioV

Redial Last Number ANSWER Press and hold for 2 seconds

sdnoces2rofdlohdnasserPREWSNAllaCrefsnarT

esaelerdnasserPDNEllaCerongI

Volume ANSWER OR END Press and release

sdnoces01rofdlohdnasserPDNEgniriaP

esaelerdnasserPREWSNAhcraeSlaunaM

sdnoces51rofrehtegotsserPDNEteseR

sdnoces5rofdlohdnasserPDNEhtooteulBtcennocsiD

Quick Reference Guide - 2 Button Switch

Manual Search for Paired Phone

If your phone is not connected to orhas been disconnected by you fromthe bluetooth kit but haspreviously been
paired to the system you can activatethe manual search whichwill locate your phone and connect to it. To activate a
manual search press the ANSWER key.

Reset / Clear All Paired Phones

To permanently remove all pairedphones from the bluetoothkit press and hold the END key for 15 seconds.

Quick Reference

3