Advantech MIC-3081 User Manual
MIC-3081
10U high 8-slot
enclosure with CT bus
and rear I/O for
CompactPCI™ backplane
Advantech CompactPCI™
Modular Industrial Computer
Copyright Notice
This document is copyrighted, 200 3. All rights are reserved. The original
manufacturer reserves the right to make improvements to the products described in
this manual at any time without notice. No part of this manual may be reproduced,
copied, translated or transmitted in any form or by any means without the prior
written permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original manufacturer
assumes no responsibility for its use, nor for any infringements upon the rights of
third parties which may result from its use.
Acknowledgements
PICMG™, CompactPCI™ and the PICMG™, CompactPCI™ logos are trademarks of
the PCI Industrial Computers Manufacturers Group. All other product names or
trademarks are properties of their respective owners.
CE Notification
The MIC-3081, developed by Advantech Co., Ltd., has passed the CE test for
environment specifications when shielded cables are used for external wiring. We
recommend the use of shielded cables.
Part No. 2008 308100 1st Edition
Printed in Taiwan Apr 2003
MIC-3081 User Manual --- Page II
Product warranty
Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for one year from the date of
purchase.
This warranty does not apply to any products which have been repaired or altered
by persons other than repair personnel authorized by Advantech, or which have
been subject to misuse, abuse, accident or improper installation. Advantech
assumes no liability under the terms of this warranty as a consequence of such
events.
Because of Advantech’s high quality -control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is
defective, it will be repaired or replaced at no charge during the warranty period. For
out-of-warranty repairs, you will be billed according to the cost of replacement
materials, service time and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. For example, CPU
speed, Advantech products used, other hardware and software used, etc. Note
anything abnormal and list any on-screen messages you get when the problem
occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return merchandise
authorization) number from your dealer. This allows us to process your return more
quickly.
4. Carefully pack the defective product, a fully -completed Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales receipt) in
a shippable container. A product returned without proof of the purchase date is not
eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid to
your dealer.
MIC-3081 User Manual --- Page III
Packing List
Before installation, ensure that the following materials have been received:
• One MIC-3081 CompactPCI™ enclosure with backplane
• One box of accessories
• One warranty certificate
• One CD-ROM for user’s manual (PDF file)
• One quick start up guide
If any of these items are missing or damaged, contact your distributor or sales
representative immediately.
Technical Support and Sales Assistance
If you have any technical questions about the MIC-3081 or any other Advantech
products, please visit our support website at:
• http://www.advantech.com.tw/support
For more information about Advantech's products and sales information, please
visit:
• http://www.advantech.com.
MIC-3081 User Manual --- Page IV
Contents
1. General Information...................................................................... 1
1.1 Introduction ................................................................................. 2
1.2 Features............................................ ............................................ 3
1.3 Specifications ................................................................................ 4
1.3.1 General .......................................................................................... 4
1.3.2 Hot- swap Fans ................................................................................ 4
1.3.3 Power Supply .................................................................................. 5
1.4 Dimensions ............................................................................ 6
2. Installation ................................................................................. 7
2.1 Initial Inspection ........................................................................... 8
2.2 The MIC-3081/8 Illustration ............................................................ 9
2.3 Installation Procedures ............ ...................................................... 11
2.3.1 Card Installation and Removal .......................................................... 11
2.3.2 Before Operating the System ........................................................... 13
2.3.3 Installing Peripherals ...................................................................... 13
2.3.4 Installing a 5.25" Device ................................................................. 14
2.3.5 Installing a 3.5" Floppy Disk Drive ........................... ........................ 15
2.3.6 Replacing the Hot-swap Fan and Air Filter ......................................... 16
Figures
Figure 1-1: MIC-3032/8 dimensions ............................. ............................................ 6
Figure 2-1: Front view of MIC -3081/8 ...................................................................... 9
Figure 2-2: Rear view of MIC-3081/8 ...................................................................... 10
Figure 2-3: Installing a card into the chassis .................................... ........................ 12
Figure 2-4: Attaching the mounting brackets to a 5.25" device .............. ...................... 14
Figure 2-5: Attaching the mounti ng brackets to a 3.5" floppy disk drive ....................... 15
Figure 2-6: Recommended device bay configuration ............................ ...................... 16
MIC-3081 User Manual --- Page V
MIC-3081 User Manual --- Page VI
Loading...