Advantech FPM1150GRVA1803-T, FPM-1150G-RVAE, FPM1150GRVA1802-T, FPM1150GRVA1902-T, FPM1150GRVA1901-T User Manual

User Manual

FPM-1150G Series

15" XGA/Industrial LED Monitorwith
Resistive Touchscreen, VGA or HDMI
Display Port and DC12 V Input

顯示器

Copyright

The documentation and the software included with this product are copyrighted 2013
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How­ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-

ments of the rights of third parties, which may result from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows® are registered trademarks of Microsoft Corp.

All other product names or trademarks are properties of their respective owners.

This manual includes the following products:

FPM-1150G-RVAE
FPM1150GRVA1801-T; FPM1150GRVA1802-T; FPM1150GRVA1803-T;

FPM1150GRVA1901-T; FPM1150GRVA1902-T; FPM1150GRVA1903-T;

FPM1150GRVA2001-T; FPM1150GRVA2002-T; FPM1150GRVA2003-T;

FPM1150GRVA2101-T; FPM1150GRVA2102-T; FPM1150GRVA2103-T;

FPM-1150G-RHAE

FPM1150GRH1801-T; FPM1150GRH1802-T; FPM1150GRH1803-T;

FPM1150GRH1901-T; FPM1150GRH1902-T; FPM1150GRH1903-T;

FPM1150GRH2001-T; FPM1150GRH2002-T; FPM1150GRH2003-T;

FPM1150GRH2101-T; FPM1150GRH2102-T; FPM1150GRH2103-T;

Part No. ************** Edition *

Printed in China Jul 2018

FPM-1150G Series User Manual ii

設備名稱： 顯示器 型號（型式）： FPM-1150G-RVAE

單元Ｕnit

限用物質及其化學符號

鉛Lead

(Pb)

汞Mercury

(Hg)

鎘Cadmium

(Cd)

六價鉻

Hexavalent

chromium

(Cr+6)

多溴聯苯

Polybrominated

biphenyls

(PBB)

多溴二苯醚

Polybrominated

diphenyl ethers

(PBDE)

電路板

－ ○ ○ ○ ○

○

內外殼

－ ○ ○ ○ ○

○

線材

○ ○ ○ ○ ○

○

其它固定組件
(螺絲,螺柱）

－ ○ ○ ○ ○

○

電源供應器

－ ○ ○ ○ ○

○

分離式電源線組

○ ○ ○ ○ ○

○

觸控模組

○ ○ ○ ○ ○

○

液晶面板

－ ○ ○ ○ ○

○

備考1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。

備考2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。

備考3.〝－〞係指該項限用物質為排除項目。

Declaration of the Presence Condition of the Restricted Substances Marking

Equipment name

Type designation (Type)

Restricted substances and its chemical symbols

Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the

reference percentage value of presence condition.

Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

Note 3：The “−” indicates that the restricted substance corresponds to the exemption.

限用物質含有情況標示聲明書

PLM MDR NO: MDR-002819

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its products will be
free from defects in materials and workmanship for two years from the date of pur­chase.

This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Advantech, or which have been
subject to misuse, abuse, accident or improper installation. Advantech assumes no
liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous testing, most of
our customers never need to use our repair service. If an Advantech product is defec­tive, it will be repaired or replaced at no charge during the warranty period. For out­of-warranty repairs, you will be billed according to the cost of replacement materials,
service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example, CPU

speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages you get when the problem
occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return merchandize

authorization) number from your dealer. This allows us to process your return
more quickly.

4. Carefully pack the defective product, a fully-completed Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales receipt)
in a shippable container. A product returned without proof of the purchase date
is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid

to your dealer.

[ 警告使用者：這是甲類資訊產品，在居住的環境中使用時，可能會造成射頻干擾，在
這種情況下，使用者會被要求採取某些適當對策。]

iii FPM-1150G Series User Manual

Declaration of Conformity

FCC Class A

Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera­tion of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.

Technical Support and Assistance

1. Visit the Advantech web site at www.advantech.com/support where you can find

the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's customer service

center for technical support if you need additional assistance. Please have the
following information ready before you call:

– Product name and serial number
– Description of your peripheral attachments
– Description of your software (operating system, version, application software,

etc.)

– A complete description of the problem
– The exact wording of any error messages

FPM-1150G Series User Manual iv

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a damp

cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near the equip-

ment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment

from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electrical shock.

13. Never open the equipment. For safety reasons, the equipment should be

opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked by service

personnel:

 The power cord or plug is damaged.
 Liquid has penetrated into the equipment.
 The equipment has been exposed to moisture.
 The equipment does not work well, or you cannot get it to work according to the

user's manual.

 The equipment has been dropped and damaged.
 The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE

STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.

16. The sound pressure level at the operator's position according to IEC 704-1:1982

is no more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.

DISCLAIMIER II: By means of a power cord connected to a socket-outlet with
earthing connection.

Noted : This product is intended to be supplied by an UL certified power supply or dc
source suitable for use at minimum Tma 50 degree ℃ whose output meets SELV or
ES1, LPS or PS2 and is rated 12Vdc, 4A min., if need further assistance, please con­tact Advantech for further information.

v FPM-1150G Series User Manual

Warning! If the customer user DC power by oneself for this product may cause the

radio interference in which case, the customer must be to take adequate
measures.

Warning! If the customer needs to use power adapter, please use the power

adapter listed on the product datasheet. If the customer use the power
adapter not listed on the product datasheet, it may cause the radio
interference in which case, the customer must be to take adequate
measures

FPM-1150G Series User Manual vi

安全指示

1. 1. 請仔細閱讀此安全操作說明。

2. 請妥善保存此用戶手冊供日後參考。

3. 用濕抹布清洗設備前，請確認拔除電源線。請勿使用液體或去污噴霧劑清洗設備。

4. 對於使用電源線的設備，設備周圍必須有容易接觸到的電源插座。

5. 請勿在潮濕環境中試用設備。

6. 請在安裝前確保設備放置在可靠的平面上，意外摔落可能會導致設備損壞。

7. 設備機殼的開孔適用於空氣對，從而防止設備過熱。請勿覆蓋開孔。

8. 當您連接設備到電源插座前，請確認電源插座的電壓符合要求。

9. 請將電源線佈置在人們不易絆倒的位置，請勿在電源線上覆蓋任何雜物。

10. 請注意設備上所有的警告標示。

11. 如果長時間不使用設備，請拔除與電源插座的連結，避免設備被超標的電壓波動損

壞。

12. 請勿讓任何液體流入通風口，以免引起火灾或短路。

13. 請勿自行打開設備。為了確保您的安全，請透過經認證的工程師來打開設備。

14. 如遇下列情况，請由專業人員維修：

 電源線或插頭損壞；
 設備內部有液體流入；
 設備曾暴露在過度潮濕環境中使用；
 設備無法正常工作，或您無法透過用戶手冊來正常工作；
 設備摔落或損壞；

 設備有明顯外觀損；

15. 請勿將設備儲存在超出建議溫度範圍的環境，即不要低於 ‐20 ℃ （‐4 ℉）或高於 60

℃ （140 ℉），否則可能會造成設備損壞。

16. 注意：若電池更換不正確，將有爆炸危險。因此，只可以使用製造商推薦的同一種或

者同等型號的電池進行替換。請按照製造商的指示處理舊電池。

17. 根據 IEC704‐1:1982 規定，操作員所在位置音量不可高於 70 分貝。

18. 限制區域：請勿將設備安裝於限制區域使用。

19. 免責聲明：請安全訓示符合 IEC704‐1 要求。研華公司對其內容之準確性不承擔任何

法律責任。

vii FPM-1150G Series User Manual