Advantech DLV4108 User Manual

Quick Start Guide DLT-V4108 Industrial PC

 DLoG GmbH, 2016

Quick Start Guide DLT-V4108, V001 PN:2005410820

1 / 15

Introduction – for your safety

 Read and observe the quick start

guide carefully.

 Keep for future reference.  Read and observe the accompanying

“DLT-V4108 Safety Instructions” carefully.

 Go to www.advantech-dlog.com for

detailed manuals, e.g. “DLT-V4108 Manual” and “MDevice Manual”.

Figure: DLT-V4108 Industrial PC

DANGER

Observe the intended use.

Observe the intended use of DLT-V4108, e.g.: no use in EX zone (potentially explosive) and on ships, no use in life-supporting systems or security-critical facilities.

Observe the required qualification.

This quick start guide is intended for qualified skilled personnel. Only skilled personnel may transport, store, commission and maintain the DLT-V4108. Qualified and skilled personnel referred in this quick start guide are persons who are familiar with these processes and have the corresponding qualifications for their activities.

Hazardous voltage, electric shock from contact with live parts.

 Do not put DLT-V4108 into operation if it is damaged.  Do not open or modify DLT-V4108.  Only connect or disconnect electrical connections when the device is in a de-energized state

(electrically dead)

 Operators of the DLT-V4108 must be trained in the handling of the device.  DLT-V4108 is intended to be supplied by DC power source, rated _9-60 Vdc, 5 A minimum and

Tma _45 degree C maximum, if need further assistance, please contact Advantech for further information."

Users must be trained / instructed.

Users of the DLT-V4108 must be trained by skilled personnel and instructed about the operation of the device.

Quick Start Guide

DLT-V4108 Industrial PC

2 / 15

Quick Start Guide DLT-V4108, V001

 DLoG GmbH, 2016

CAUTION

Hazards that pose a risk to life and limb - Personal injury

Possible property damage:

DANGER / WARNING / CAUTION

DANGER: Danger that immediately leads to death or severe injury. WARNING: Danger that can lead to death or severe injury. CAUTION: Danger that can lead to slight injuries.

NOTICE: Physical damage

Information about possible physical damage.

Technical data of DLT-V4108

DLT-V4108

Weight

3.35 kg

Dimensions

290 x 230 x 60.5 mm (width x height x depth)

Operating temp.

-20 to +45 °C

Storage temp.

-20 to +50 °C

Relative humidity

10~95% non-condensing, ambient temperature 25 °C

IP Protection class

IP65

Replaceable Battery.

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Design method in our quick start guide:

Quick Start Guide DLT-V4108 Industrial PC

 DLoG GmbH, 2016

Quick Start Guide DLT-V4108, V001 PN:2005410820

3 / 15

Operation of DLT-V4108

NOTICE: Physical damage

Users of DLT-V4108 must be trained by skilled personnel and instructed about the operation of the device.

Left side:

- Power on/off

- Display brighter

- Display darker

- Backlighting on/off

- Touchscreen on/off

- SHIFT

Right side:

- S1 to S12 programmable keys

Enter data

You can enter data using the touchscreen and the built in integrated keyboard.

Operate the touchscreen with:

 Clean, dry fingers.  Clean, dry, thin gloves.  Suitable touch stylus

Front keys

Quick Start Guide

DLT-V4108 Industrial PC

4 / 15

Quick Start Guide DLT-V4108, V001

 DLoG GmbH, 2016

System Status

LED Status

Color

System power on

Static

Green

System power off

Off

System over/under temperature

Static

Red

System UPS Battery is charging

Static

Orange

System thermal sensor faculty

Blinking

0.5 sec. on / 0.5 sec. off

Red

System UPS Battery Capacity Low

Blinking

0.2 sec. on / 0.8 sec. off

Orange

System is powered by UPS battery only

Blinking

0.5 sec. on / 0.5 sec. off

Green

Touch Status

LED Status

Color

Touch function ON

Off

Touch function OFF

Static

Orange

System Status

LED Status

Color

System switch to S1/S2/S3/S4/S5/S6

Off

System switch to S7/S8/S9/S10/S11/S12

Static

Orange

LED indication on “Power ON /OFF “Key

LED indication on “Touch ON/OFF “Key

LED indication on “SHIFT “Key

Quick Start Guide DLT-V4108 Industrial PC

 DLoG GmbH, 2016

Quick Start Guide DLT-V4108, V001 PN:2005410820

5 / 15

Software configuration with MDevice

You can find details on configuration in the "MDevice Manual” at www.advantech-

dlog.com.

4.1 Wireless technology

WARNING

DLT-V4108 Industrial PCs are configured with the MDevice software, e.g., with regard to Wi-Fi settings, network settings, front key assignment, etc.

 Start MDevice via Start -> Programs -> DLoG: MDevice.  Enter the standard password: gold.

Only authorized skilled personnel are permitted to configure the wireless settings on DLT-V4108.

Safety information about radio wave emissions

To comply with the SAR limited values for exposure to radio waves:

 While the device is in operation, the antenna must have a distance of ≥ 20 cm to the body.  Make sure that the transmission power and the radio frequency of DLT-V4108 comply with the

regulations for the respective country where the device is deployed.

 Depending on the country-specific regulations, the operating company/importing company may

be required to ensure the settings of wireless operation are compliant. The regulatory authorities in the relevant country can provide information on this.

Any changes or modifications which are not expressly approved by the party responsible for the compliance can lead to the withdrawal of the operating license and guarantee for this device.

+ 10 hidden pages