How it Works
Advance Security
Loading...
TRC746AA
User manual
3 pgs1.29 Mb0

Advance Security TRC746AA User manual

ACTIVE AR MING – LOC K & ARM:
T
A
1. Press
HIDDEN ALARM FUNCTION: Silent Alarm
The vehicle doors will automatically lock after the passive arming cycle
ACTIVE DISARMING – UNLOCK & DISARM:
DISARMING WITHOUT A TRANSMITTER:
1. Enter the vehicle and turn the ignition switch to the 'ON’ position.
2. (Alarm will sound.)
3. Within 10 seconds push and release the valet switch. The alarm will stop
VALET MODE: (System is in Disarm Mode)
button on the transmitter.
2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The vehicle’s doors will lock upon arming if interfaced with the security system.
SILENT ARMING / DISARMING: Press the transmitter at the same time. This will arm or disarm your security system, No chirp sound will be heard, arm / disarm confirmation will be through the vehicles parking lights only.
SENSOR BY-PASS: Press the arm the security system and by-pass the shock sensor.
Press the the hidden alarm function. The security system will arm and with “Hidden Alarm Mode” The siren / horn will be silenced even if the sensor is triggered in the armed mode. Alarm indication will only appear on the LCD Transmitter.
PASSIVE ARMING (Programmable)
Active arming / disarming is controlled by your security system via the remote transmitter. This security system is equipped with an optional Passive Arming feature which allows the security system to arm 30 seconds after the last door is closed. Operation is as follows.
1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for
3. After the 30-second time has elapsed, the security system will
PASSIVE ARMING WITH PASSIVE DOOR LOCKING
has been completed. PASSIVE ARMING BY-PASS: While the system is disarmed, Press the
“ON”. The security system will remain in this temporary state for as long
as you wish. To exit passive by-pass, press the transmitter buttons and the system will return to normal status.
1. Press
2. The siren will chirp twice and the parking lights will flash twice
TAMPER DISARMING: If the alarm is triggered, upon disarm the system’s siren will chirp 4 times, and the parking lights will flash 3 times telling you the alarm has been triggered during the last armed state.
PATHWAY ILLUMINATION: When receiving an unlock /disarm signal, this feature will turn the parking lights “ON” for 30 seconds and for 10 seconds upon the lock signal. (Programmable) AUTOMATIC RE-ARM: If this feature is selected, the security system will automatically re-arm itself in 60 seconds after disarming with remote transmitter. Automatic rearm will cancel if any door is opened before the 60 seconds timer has elapsed.
The Override function may be used if the remote transmitter is lost or inoperative.
button first; within 3 seconds press the button to activate
30 seconds. If you reopen any door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once all vehicle entrances are closed.
automatically “ARM”. The siren will chirp [1] time and the parking lights will flash [1] time.
button twice, the system will respond with [1] chirp and LED will turn
button on the transmitter.
indicating that the security system is now disarmed. The vehicle’s doors will unlock.
sounding and enter the disarm mode. You can now start and operate the vehicle normally.
The valet switch allows you to temporarily bypass all alarm function, eliminating the need to hand your transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm functions and remote start functions are bypassed, however, the remote panic feature and remote door locks will remain operational. To use the valet mode, the system must first be disarmed either by using your remote transmitter, or by operating the Manual Override sequence.
a). Under disarm mode, turn the ignition to “ON” position. b). Press and hold valet switch for 2 seconds until the LED turns ON solid. The LED will remain on as long as the system is in 'valet mode'. Exit Valet Mode: a). Turn ignition 'ON'. b). Push and hold valet switch for 2 seconds, The LED will turn off indicate the system are exiting the valet mode.
RC746A
and buttons
button two times within 5 seconds will
or
CAR LOCATOR
Under armed mode, press the siren will chirp 6 times. The parking light will flash 12 times, for you to easily locate your car.
PANIC FUNCTION:
The transmitter can be used as a remote panic switch to manually trigger the alarm in case of emergency.
Press and hold the sound.
To stop the alarm, press the trunk If the button is not pressed, the alarm will automatically stop after 30 seconds.
TRIGGER THE SYSTEM
When armed, your vehicle is protected as follows: Light impact will trigger the warn-away signal. Heavy impacts / Doors open /(if installed) Hood open / (if installed) Trunk open / Turning on the ignition key will trigger the programmed sequence. The starter disable relay (if installed) prevents the vehicle’s starter from cranking. The siren, horn, parking lights, and dome light will turn on alerting of an intrusion for 30 seconds. Then it will stop and automatic reset and re­arm. If the any one of the sensors or detectors is still active, the alarm system will sound a maximum of 3 times of 30 seconds cycles. NOISE ABATEMENT CIRCUIT: Your system has a “Noise Abatement Circuit”. It prevents annoying repetitive trigger sequences due to faulty door pin switches or environmental conditions such as thunder, jackhammers airport noise, etc. Here’s how “Noise Abatement Circuit” works: The alarm triggers five times. Each time, the same sensor or switch has triggered the alarm; the “Noise Abatement Circuit” will interpret this pattern of triggers as a false alarm. After the third trigger, the “Noise Abatement Circuit” ignores, or bypasses, that sensor or switch until a different sensor or switch is trigger.
SYSTEM’S TRIGGER CHECK (For two-way transceiver operation only)
Press and hold F button of LCD remote until 3 beeps sound , release and
re-press F button again, the LCD remote will show “ALARM “ icon flashing on text area (see advanced users mode), then press
system trigger check.
SYSTEM’S STATUS CHECK (For two-way transceiver operation only)
Press F button of LCD remote until 3 beeps sound , the LCD remote will show “STATUS “ icon flashing in the text area (see advanced users
mode), then press It responds with one melody sound and all vehicles’ status records will immediately displayed on the LCD screen. Note: If it has no response then you are out of range.
TRUNK RELEASE: Press and hold seconds to remotely control the trunk release.
CHANNEL4 TIMER CONTROL OUTPUT:
Press the transmitter 4 function.
Channel 4 is user-programmable timer output. You may program the built­in timer to send a ground signal for any time duration from 1 second to 120 seconds. For instance, this timer output may be used to turn on the headlight, power window or sunroof.
CHANNEL5 TIMER CONTROL OUTPUT:
Press the transmitter Channel 4 function.
Channel 5 is user-programmable timer output. You may program the built­in timer to send a ground signal for any time duration from 1 second to 120 seconds. For instance, this timer output may be used to turn on the headlight, power window or sunroof
Clear the Flashing Icon and Melody Sound: The Transmitter will reset the
flashing icons the next time the Ignition is cycled to the ON position.
Stopping The Trigger Melody Sound: When the alarm is triggered, the LCD screen will alert the user through a melody sound and a flashing trigger icon. Press any button on the LCD remote transmitter to stop melody sound only.
ANTI CAR- JACKING (Programmable) Warning: If you don't need the carjacking function in this alarm system, be
sure to set carjacking feature “OFF”. This systems default setting is “OFF” for all carjacking modes.
Please download the complete manual for this and other advanced functions.
button for 3 second. The alarm will immediately
button to active car locator function. The
button on the remote control.
button to activate
button to activate system status check.
button on the transmitter for two
and buttons at the same time to active Channel
and buttons at the same time to active
.
 
ADVANCED USER’S MODE:
LCD REMOTE TRANSCEIVER OPERATION:
Transmitter button LCD Feature & remark
Press + Backlight turns on for 3 seconds
Press & Hold +
for 2 seconds (until 1
chirp is heard)
Press button Press button = check the vehicle’s
Press button Press button = check the system
Press button Press button = check the vehicle’s
Press button PRESS button FOR OPTION OF CAR
Press & hold button
for 2 sec.
Press & hold button
for 2 sec.
Press & hold
button for 2 sec.
Press & hold button
for 2 sec.
Transmitter button LCD Display System feature & remark Press & hold button
+ for 3
seconds (Two chirps will be heard)
Alarm Clock adjust
U 01 Press & Hold
(chirp one time )
LCD display show U: 01 = enter 1
programming of LCD Remote
status.
trigger condition
temperature.
1 / CAR 2
Press & hold
on
= Button
Lock
.Table 2: two beeps to confirm
12 is flashing
00
is flashing
12 is flashing
00 is flashing
Lock On (1 beep) / Off (2 beep, default =
Off)
Press & hold button for 2 sec. Vibrator
or Melody mode selection (default =
Melody)
Press & hold
Count Down Timer (Off / 10m/
20m/30m/1HR / 1.5HR / 2HR)
Press & hold button for 2 sec. Button
Beep Sound mode Enable (1 beep) /
Disable (2 beeps, default = disable)
clock time adjust
increase “Hour” digit, adjust hour from 0 to 12.
Complete adjust “Hour, “Press button.
“Minute” from 0 to 59.
Press setting.
increase “Hour” digit, adjusts clock hour from 0 to 12.
Complete adjust “Hour, “Press button.
“Minute” from 0 to 59.
Press setting.
button for 2 sec. Button
or button to decrease or
or button - Adjusts clock
button complete clock
or button to decrease or
or button - Adjusts clock
button complete Alarm clock
+ for 2 seconds
button for 2 sec. Fast
Count Down Timer setting
Press & hold button
+ for 5
seconds (chirp x 3)
Exit : Press + buttons or not press any button within 10 seconds, it will exit remote programming mode automatically.
Low Battery Indication:
When the power of the battery weakens, it has two short “bi” sound and flash
icon while pressing the button of the LCD screen transceiver.
Stop The Trigger Melody Sound: While triggering the alarm the LCD screen
will alert user through melody sound and flashing trigger icon, press any button on the LCD remote transmitter to stop melody sound only, the remote control buttons will not send a command to the system.
0 :00
0 is flashing
Full battery
icons flash
or adjust parking “Hour”
(value from 0 to 2).
Complete adjust “Hour, “Press button.
or adjust parking “Minutes”
(value from 0 to 30).
Press
button complete count
down timer setting.
Power Save mode : ON ? OFF LCD remote transceiver uses “0” current to save the battery power.
QUICK START USERS GUIDE
If you do not understand any part of this quick start users manual and would like the complete version,
The complete manual is necessary for advanced users and not all user functions are covered in this quick start guide.
Encore E-7 LCD Remote Transceiver
STANDARD LCD ICON CONFIGURATIONS:
The lock icon will be displayed when system is ARMED
Driver paging
Someone is paging
you in your vehicle
Hood Trigger
Hood is illegally opened (Zone 1)
Door Open Warning
Doors are illegally opened (Zone 3)
Ignition Trigger
Ignition switch is illegally turned on (Zone 5)
Remote Transmission
You are transmitting to the control unit.
Anti Car-Jack Mode Activated
The unlock icon will be displayed when the system is disarmed.
Valet Mode
Remote start and alarm
functions temporarily disabled
Trunk Trigger
Trunk is illegally opened (Zone
2)
Sensor Trigger
Trigger on shock Sensor 1
(Zone 4)
System trigger
In – Range Indicator
You are within the range of the
remote control.
Button Lock (icon on)
&+

Activate Channel 3
Time Monitor
12:00
Activate Channel 4
Alarm Clock
Alarm clock set.
Parking Meter
Parking meter reminder time.
Low Battery
You have to change the battery of remote control.
+
Pressing the Star and trunk buttons together Briefly will turn ON the
Power Save (battery icon full bar flash)
BATTERY CHANGING:
Depending on the usage, the remote batteries should be changed at
least once a year in the one way remote and once every 4-8 months for the two-way remote.
The 1-way remote, (E-7s) is powered by a pair of 3V, CR2016 These batteries are available at most locations batteries are sold and can be replaced by the user.
batteries.
Battery Level Indicator (2-way remote)
The Battery Level indicator has three level indicators that serve as a visual indication of battery charge. When the battery reaches a low charge level that requires changing, the remote control will generate a single notification chirp, and the Battery Level indicator continuously. If the battery voltage is LOW, the range of the remote will be reduced by 50% to conserve battery life. The two way remote requires 2, 3 Volt CR2032 batteries. The operation lives of these batteries are affected by many factors including, temperature, usage, back-light ON time and programmable “in range status settings”. Do not allow these batteries to corrode or become wet for any extended period of time.
will flash
REMOTE TRANSMITTER OPERATION:
Transmitter
Button
System Function Remark
Lock Doors & Arm System
Press and Hold for 3 seconds.
Panic function
Press Trunk
panic function
button to stop
Car Locator Press when in armed mode
twice within 3
-
- Arm System and Silent
Arm and Delete The 2
Stage Shock Sensor
Alarm Function
+
+
-
-
+
+ 
+
+
CHIRP INDICATORS: PARKING LIGHT:
Chirp Function Parking light Function
1 chirp 2 chirps 3 chirps 4 chirps 6 chirps
ALARM OPERATING CONDITION:
1. Arming
2. Disarming
3. Trigger Alarming Flashes
4. Passive Starter
Disable
5. Panic Alarming Flashes Flashes
6. Car-
Jacking
7. Car
Locator
Silent Arming / Disarming Ignition in "off" position.
Active Anti Car-Jacking
Mode
Unlock Doors & Disarm
System Two Steps Door Unlock & Disarm System (optional)
Trunk Release (Channel
3)
Passive Arming By-pass While the system Disarmed.
Channel # 4 Timer Output
Channel # 5 Timer Output
(4)
(5)
Turn ON the backlight Two-way remote
Switching code For 2nd
Car Operation.
Arm
Disarm
Defective Reminder
Disarm / Triggered
Car Locator
Siren /
Parking
Horn
Light
1 or 3
1 Flash
Chirps
2 or 4
2 or 3
Chirps
Flashes
Fast Flash Disable
Alarming Flashes Disable Flashes
6 Chirps
12
Flashes
Constant On
LED Doors Starter Dome Light
Slow
Flash
Unlocking
Slow
Flash
Locking
Press
seconds. Pass will appear on
the remote
Press within 3 seconds and
Hold the
Ignition in "on" position press
button
and hold for 2 seconds
Press twice within 3 seconds.
Press and Hold for 2 seconds
Optional
Optional
For one way remote
transmitter
1 flash 2 flashes 3 flashes
12 flashes
Locking Disable
Disable Flashes
Arm
Disarm
Disarm / Triggered
Car Locator
Under Remote Start
Turns on for 30 -
second
Loading...
+ 1 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use