Advanced Card Systems ACR3901T Users Manual
ACR3901T-W
ACR3901T-W Test Manual V1.00
Name Signature Date
Prepared by:
Reviewed by:
Approved by:
Subject to change without prior notice
Keith Mo 2017-07-17
info@acs.com.hk
www.acs.com.hk
1.0. USB Mode Loopback program
This section introduces ACR3901T-W Reader using in USB Mode
Tools Requirement:
a. ACR3901T-W reader
b. ACOS3 Card
c. USB Cable
d. PC & USB Mode loopback program “ESD4.exe”
Test Procedure:
1. Insert the “ACOS3” test card into the ACR3901T-W reader.
2. Plug the ACR3901T-W reader into PC through USB cable
3. The Green LED is blinking and the reader is in USB mode.
4. Double-click “ESD4.exe” (TestProgram\USB_Mode) to start the testing application.
ACR3901T-W Test Manual
Version 1.00
info@acs.com.hk
www.acs.com.hk
The test program needs “Visual Basic 6.0 run time files” on PC, if “ESD4.exe” cannot
be opened, please install “vbrun60sp5.exe” first under the folder
“TestProgram\USB_Mode\”.
5. Press “Initialize” button to search the smart card reader.
ACR3901T-W Test Manual
Version 1.00
info@acs.com.hk
www.acs.com.hk
6. Press “TEST” button to start testing.
ACS ACR3901U ICC Reader 0” will display
7. The test program is running.
ACR3901T-W Test Manual
Version 1.00
info@acs.com.hk
www.acs.com.hk
ACR3901T-W Test Manual
Version 1.00
info@acs.com.hk
www.acs.com.hk
8. When the testing is finished, press “Quit” button to stop and end the program.
9. Unplug the reader.
ACR3901T-W Test Manual
Version 1.00
info@acs.com.hk
www.acs.com.hk
2.0. Bluetooth Mode Loopback program
This section introduces ACR3901T-W Reader using in Bluetooth Mode.
(It can connect USB adapter to charge the battery inside the reader)
Tools Requirement:
a. ACR3901T-W reader
b. ACOS3 Card
c. Bluetooth 4.0 USB Adaptor Dongle
d. PC & Bluetooth Mode loopback program “ACR3901U FCC Tool V2.00.exe”
Test Procedure:
1. Plug in the Bluetooth Adaptor into PC
(For the first time to use, please install the driver, please refer to Section 5.0 –
Bluetooth Adaptor Driver Installation)
2. Run “ACR3901U FCC Tool V2.00.exe” in folder “TestProgram/BT_Mode/”
3. The program will be shown as the picture below.
4. Select the suitable com port and then press “Connect”.
ACR3901T-W Test Manual
Version 1.00
info@acs.com.hk
www.acs.com.hk
Loading...