Adtec Soloist 4111 User Manual
TM
4111
Getting Started
Thank you for your purchase of the Adtec Soloist 4111. This
quick start guide should help you with your initial setup. Advanced
users can find direct API command help as part of the on-board web
application. You can view it by looking for the HELP tab once your unit
is powered up and you are connected to the web-application. See back
for more details.
Front Panel LEDs:
Play
No Decoder Activity
Active Decode
Multicast
Playing from Hard Drive
Multicast Receiving
Video
No Video Decoding
Active Video Decoding
Audio
No Audio Decoding
Active Audio Decoding
Display Target
Indicates current display target
NTSC, PAL, 720, 1080, Other
Alarm
Decoder Alarm
Digital Media Server
System
Login
Duration
Network
Time
NTP
Alarm
Mirror
COM2
Firmware
Decoder
Status
Target
Video
Audio
Multicast
Quick Start Guide
Front Panel Menus:
Use Mode Button to move through top layer menus.
Use arrows for navigation in submenus.
Use select to enter into edit mode and enter to save selection.
Hue Brightness Contrast Saturation
Track Volume SPDIF
Mode IP Port
System LED Status
Power
Power is OFF
Power is ON
Alarm
No System Alarm
Minor Alarm
Major Alarm
Link
No Link Detected
Link Active
Busy
No Network Traffic
Network Traffic Present
Storage
Not Currently Used
Additional support can be provided through our
Customer Support Department.
Telephone: 615.256.6619
Email: support@adtecinc.com
Internet: www.adtecinc.com/supportrequest/
The most recent firmware is available on our support website
www.adtecinc.com.
Units ship with the front panel
logged in by default. If you become
logged out and are prompted for a
password, use the following key
sequence for access.
Press <Select> when panel displays
‘User Login -- logged out’
Press <Up arrow>
Press <Select>
Press <Enter>
Press <Right arrow>
Press <Enter>
Loading...