Adt GPIO DATASHEET
A C C E S S C O N T R O L|C C T V|E A S|R F I D|F I R E P R O T E C T I O N|I N T R U D E R A L A R M S
DATA SHEET
Sensormatic®RFID General Purpose
Input/Output (GPIO) Hardware Interface
Board
The Sensormatic®RFID General Purpose Input / Output
(GPIO) Hardware Interface Board provides a centralized
connection and electrical power for external input /
output devices, such as motion sensors, light stacks,
and audible alarms, to be used with the Agile 2 or
Impinj Speedway readers. These output devices
provide a visual or audible indication of predefined
reader status and events.
Its compact design facilitates easy mounting inside an
RFID General Purpose Reader Enclosure or other
suitable electrical enclosure. Input devices, such as
motion or position sensors, receive power for their
active circuits through the GPIO Hardware Interface
Board and provide input signals back to the reader.
Additionally, the GPIO Hardware Interface Board
electrically isolates input and output devices, which
protects the RFID reader.
The RFID GPIO Hardware Interface Board enables the
reader with Enhanced Operating Software (EOS) to
work with input / output devices to better automate
and integrate RFID with your processes.
Features:
Easy Installation. Utilizes pluggable, springloaded terminal blocks for quick and easy
installation.
RFID Reader Protection. Provides an isolated
electrical interface between the reader and
general purpose input and output devices.
Excellent Compatibility. Compatible with any
standard 24Vdc GPIO device.
Sensormatic®RFID General Purpose Input/Output
(GPIO) Hardware Interface Board
Technical Specifications
GPIO Inputs
Number of discrete inputs: 2 or 4
InputVoltage Active (high): 6-30Vdc
InputVoltage Not Active (low): 0-3VDC
GPIO Outputs
Number of discrete outputs: 4 or 8
Output current (each): 300mA max.*
OutputVoltage: 24Vdc
Relay switch load: 2A max @ 30VDC
DATA SHEET
Power Supply Requirements
24Vdc Certified Limited Power Source, Class 2
Able to share or use reader power supply
(*Total current supplied to devices connected to HIB must
not exceed current rating of power supply)
Physical/Environmental Specifications
Dimensions: 13.3 cm x 9.5 cm x 6.9 cm
(5.25 in x 3.75 in x 2.75 in)
Weight: .18 kg (0.4 lb)
OperatingTemperature Range: -10 to 50 deg C
Regulatory Compliance
EMC…………………………47 CFR, Part 15
EN 55022
EN 301 489-3
RSS 210
Safety……………………… Complies with UL 60951-1
CSA C22.2 No 60950-1
EN 60950-1
ensormatic
S
Hardware Interface Board
®
FID GPIO
R
Product Code
IDEQPCV012-1: GPIO HIB, Agile 2 (2 in/4 out)
IDEQPCV013-1: GPIO HIB, Speedway (2 in/4 out)
IDEQPCV013-2: GPIO HIB, Speedway (4 in/8 out)
Included Items
GPIO Hardware Interface Board (pictured above), includes
two for IDEQPCV013-2
24Vdc Power Extension Cable .91 m (3 ft)
.91 m (3 ft) GPIO Interface Cable for either Agile 2 or Impinj
Speedway reader
DB9 toTerminal Block Adapter(s)
Technical Manual
Compatible Products:
IDRDR2: series Agile 2 Readers (EOS required)
IDSWEOS: series EOS Software/License
IPJ-R1000-USA: Speedway Reader (EOS required)
5606-0061-01: Agile 2 Power Supply (1.67A)
IDCBLIMP: Speedway Power Supply (2.5 A)
December 2006
For more information about RFID General Purpose Input/Output
(GPIO) Hardware Interface Board, please speak to your local
ADT sales representative or visit us at www.sensormatic.com
ADT AlwaysThere
1-877-258-6424 ADT.COM
©2006 ADT Security Services, Inc. ADT, the ADT logo and ADT AlwaysThere are registered trademarks of
ADT Services AG, and are used under license. Sensormatic is a registered trademark of Sensormatic
Electronics Corporation.
®
Loading...