ADP ACA86025, ACA86035 User manual

Installation Instructions

Ultrair Coalescing Filter Kit

Part #ACA86025 (5 Oz. Bowl)

Part #ACA86035 (10 Oz. Bowl)

Description:

The Apollo Ultrair Coalescing Filter is designed specifically for removing water, oil, and other contaminates from compressed air.
The 0.01 micron Ultrair Coalescing Filter removes 99.9 percent of any oil discharged by an oil lubricated compressor and large
amounts of water which can be present in oil-less and oil lubricated compressed air. Coalesced liquids gravitate into the sump bowl
where they are discharged via an automatic float drain. The kit comes complete with the Ultrair Coalescing Filter assembly,
mounting bracket, mounting clips, 1/4” CA x 1/8” MPT fitting, 6 ft. of 1/4” O.D. poly-flow tubing, and hardware for mounting the
kit.

The Ultrair Coalescing Filter element (Part #PFM85230 for the 5 oz. bowls and Part #85210 for 10 oz. bowls) should be changed
once a year.

Installation:

Before installing the Ultrair Coalescing Filter be sure that the power to the compressor is “OFF” and that the storage tank is drained
of all air and liquid.

We recommend that the Ultrair Coalescing Filter be installed in line between the compressor head and the storage tank if at all
possible, so that possible corrosion in the storage tank may be avoided. In applications where this is not possible, the Ultrair
Coalescing Filter should be installed in line and as close to the operatory as possible. A bracket is supplied that allows the filter to
be mounted directly to the storage tank saddle or to a wall for downstream in-line installation. See illustrations below.

(TYPICAL)

Standard Compressor Mounting

Warranty Information: 90 Days

All ADP accessories are thoroughly inspected and tested in accordance with rigid specifications and standards. Our accessories are guaranteed
against any defective material and workmanship from the date of shipment; provided that the installation, operation, and maintenance is done in
accordance with ADP procedures as outlined in our Installation and Maintenance Guides. Warranty cards must be returned to ADP within ten days of
installation to effect warranty. No other warranties or guarantees, expressed or implied are made.

ADP’s obligation under the warranty is to provide parts for the repair or, at its option, to provide the replacement product (excluding labor). All
special, incidental and/or consequential damages are excluded. We will not issue credit for accessories without first attempting to correct the
problem in the field. Written notice of breach of warranty must be given to ADP within the warranty period. The warranty does not cove damage
resulting form improper installation or maintenance, accident or misuse. The warranty does not cover damage resulting from the use of cleaning,
disinfecting or sterilizing chemicals and processes. The warranty does not cover vacuum failures due to hard water deposits. Failure to follow
instructions provided in ADP’s Installation and Maintenance Guides may void the warranty.

Apollo Dental Products, Inc. • 245 W. Dakota Ave. • Clovis, CA 93612 • Technical Support

559/292-1444 • 800/233-4151 • Fax [phone] • www.apollodental.com

AMI60205 Rev. 8/02