ADJ WIFLY TRANSCEIVER Operation Manual

WIFLY TRANSCEIVER

Introduction:

Congratulations and thank you for purchasing the ADJ WiFly TransCeiver. The WiFly Transciever
is a wireless DMX TransCeiver (Transmitter/Receiver in one) that is compatiable with other ADJ
products with WiFly. After connecting the WiFly TransCeiver to a DMX Controller you are able to
send a constant and reliable wireless DMX signal up to 500 feet to other ADJ WiFly products. The
wireless frequencyy is 2.4 GHz and will coexist in busy RF enviroments alongside technologies
like Bluetooth and Wi-Fi. The ADJ WiFly TransCeiver is the ideal solution for DJ’s, nightclubs, bars
or for any event where you don’t want data cables to be seen, and when it is not easy to run data
cables to your fixture(s) location.

Customer Support: ADJ Products, LLC provides a toll free customer support line, to provide set up
help and to answer any question should you encounter problems during your set up or initial opera­tion. You may also visit us on the web at www.americandj.com for any comments or suggestions. For
service related issue please contact ADJ Products, LLC. Service Hours are Monday through Friday

8:00 a.m. to 4:30 p.m. Pacic Standard Time.

Voice: [phone]
Fax: [phone]
E-mail: [e-mail]

Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself,
doing so will void your manufactures warranty. In the unlikely event your unit may require service
please contact ADJ Products, LLC customer support.

The WiFly TransCeiver carries a 1 Year (365 days) limited warranty. Please fill out the enclosed war­ranty card to validate your purchase. All returned service items whether under warranty or not, must
be freight pre-paid and accompany a return authorization (R.A.) number. If the unit is under warranty
you must provide a copy of your proof of purchase invoice. Please contact ADJ customer support
for a R.A. number. For additional warranty info please visit our website.

Specifications:

Voltage......................................................................................................................................DC 9-12V

Wireless Frequency.....................................................................................................................2.4 GHz

Signal Range..............................................................................................................................500 Feet

Dimensions...............................................................................................4.75” (L) x 4.75” (W) x 1.5” (H)

115 x 115x 38mm

Weight................................................................................................................................2 lbs/ 0.67 Kg

INDICATORS, CONNECTIONS AND FUNCTIONS -

1. Dipswitches - Use these dipswitches to set the channel.

2. Wireless Receiver Indicator LED - When this Green LED is lit, the TransCeiver is receiving the wireless

DMX signal.

3. Wireless Transmitter LED - When this Yellow LED is lit, the TransCeiver is sending the wireless DMX
signal.

4. Power Indicator LED - This LED indicates the power on/off status.

5. 3 Pin DMX Out - Output the DMX signal.

6. 5 Pin DMX Out - Output the DMX signal.

7. Antenna - This antenna will receive or trasmit the DMX signal.

8. Power Supply Connection - Connect the provided power supply to this jack.

9. 3 Pin DMX In - Input the DMX signal.

10. 5 Pin DMX In - Input the DMX signal.

Setting Up the WiFly:

With this feature you are able to control the fixtures with DMX without the need for XLR cables. The WiFly range
is up to 500 feet (open line of sight).

NOTE: If connecting to a ADJ WiFly fixture, please also see the set up functions associated with your
WiFly fixture.

1. Power on the WiFly, the red power LED indicator will light up.

2. When using the WiFly as a transmitter connect the WiFly to a DMX512 controller via XLR cable. The
yellow Transmitting LED indicator will light up.

3. After the LED indicator lights up, use the dipswitches to set the WiFly channel. The channel can be set
between 0-15.

4. The WiFly TranCeivers that are connected to your fixtures or the WiFly fixtures themselves must be set to
the same WiFly channel. If the WiFly TransCeiver (receiver) connected to your desired fixture is set up
correctly, the green receiver LED indicator will glow.