Adj Tri Gem LED User Manual [ru]
Tri Gem LED™ Introduction
TRI GEM LED
General instructions:
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Unpacking:
Thank you for purchasing the Tri Gem LED™ by American DJ®. Every
Tri Gem LED™ has been thoroughly tested and has been shipped in
perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears
to be damaged, carefully inspect your unit for any damage and be sure
all equipment necessary to operate the system has arrived intact. In
the event damage has been found or parts are missing, please contact
our toll free customer support number for further instructions. Please
do not return the unit to your dealer without rst contacting customer
support.
Customer Support:
American DJ® provides a toll free customer support line, to provide set
up help and to answer any question should you encounter problems
during your set up or initial operation. You may also visit us on the web
at www.americandj.com for any comments or suggestions. For service
related issue please contact American DJ®. Service Hours are Monday
through Friday 9:00 a.m. to 5:00 p.m. Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: support@americandj.com
To purchase parts online visit http://parts.americandj.com
User Instructions
American DJ®
6122 S. Eastern Ave.
11/08
Los Angeles Ca. 90040
www.americandj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures warranty. In the unlikely event your unit may require service please contact
your nearest American DJ dealer.
PLEASE do not discard the shipping carton in the trash. Please
recycle when ever possible.
©American DJ Supply® - www.americandj.com - Tri Gem LED™ Instruction Manual Page 2
Tri Gem LED™ General Instructions
Tri Gem LED™ Operation
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Tri Gem LED™ Features
• Includes Built-In Hanging Yoke
• Sound-Active
• Light Weight
• LED Output Similar to 250W Lamp
Tri Gem LED™ Warranty Registration
The Tri Gem LED™ carries a three year (1095 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the
return package. A brief description of the problem as well as the R.A.
number must also be written down on a piece of paper and included
in the shipping container. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. You may obtain a R.A.
number by contacting customer support at (800) 322-6337.
Introduction: The American DJ® Tri Gem
LED™
is a LED moon-ower
effect. This fixture is designed for mobile DJ’s, clubs, bands, roller
rinks and any arena that requires a compact, light weight, easy to use
unit.
General Operation: This fixture is designed to operate as a stand
alone sound active unit, there is no need of a controller. It has been
tested and there is no assembly necessary. The Tri Gem LED™ is ready
to be plugged in out of the box, there is no power switch. Plug the unit
in to a matching power outlet or into a power pack. Light output will
be immediate when the unit is powered on. The unit must receive a
sound source to operate normally. Use the sound sensitivity knob on
the rear of the unit to adjust the sound sensitivity. Turning it clockwise
will make it more sensitive to sound, turning it counter-clockwise will
make it less sensitive.
Tri Gem LED™ Fuse Replacement
Fuse Replacement: First unplug the power. The fuse holder is
located at the rear of the unit next to the power cord. Using a flathead screw driver unscrew the fuse holder. Remove the bad fuse and
replace with a new one.
©American DJ Supply® - www.americandj.com - Tri Gem LED™ Instruction Manual Page 4©American DJ Supply® - www.americandj.com - Tri Gem LED™ Instruction Manual Page 3
Loading...