Adj Rotobeam 4 User Manual

Rotobeam 4

©2013 ADJ Products, LLC all rights reserved. Information,

specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis­claim any and all liabilities for property, equipment, building, and
electrical damages, injuries to any persons, and direct or indi­rect economic loss associated with the use or reliance of any
information contained within this document, and/or as a result
of the improper, unsafe, unsucient and negligent assembly,
installation, rigging, and operation of this product.

8/14

User Instructions

Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!

Rotobeam 4 Introduction

Rotobeam 4 General Instructions

Unpacking: Thank you for purchasing the Rotobeam 4 by ADJ Prod-

ucts, LLC. Every Rotobeam 4 has been thoroughly tested and has
been shipped in perfect operating condition. Carefully check the ship­ping carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your xture for any
damage and be sure all accessories necessary to operate the unit has
arrived intact. In the case damage has been found or parts are miss­ing, please contact our toll free customer support number for further
instructions. Do not return this unit to your dealer without rst contact­ing customer support.

Introduction: The Rotobeam 4 is part of ADJ’s continuing pursuit for

creating high quality affordable fixtures. The unit is compatible with the
UC IR Remote (Sold Separately). This remote makes it easy to con­trol strobing and blackout from a distance. This unit is great for clubs,
bands, roller rinks, arenas, performance stages, theatrical productions,

and any other special effects lighting

Customer Support: ADJ provides a toll free customer support line,

to provide set up help and to answer any question should you encoun­ter problems during your set up or initial operation. You may also visit
us on the web at www.adj.com for any comments or suggestions. Ser­vice Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. Pacic
Standard Time.
Voice: [phone]
Fax: [phone]
E-mail: [e-mail]
To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war­ranty. In the unlikely event your unit may require service please contact
ADJ.

PLEASE recycle the shipping carton when ever possible.

ADJ Products, LLC - www.adj.com - Rotobeam 4 User Manual Page 2

To optimize the performance of this product, please read these operat­ing instructions carefully to familiarize yourself with the basic operations
of this unit. These instructions contain important safety information
regarding the use and maintenance of this unit. Please keep this manual
with the unit, for future reference.

Rotobeam 4 Warranty Registration

The Rotobeam 4 carries a 2 year (730 days) limited warranty. Please
fill out the enclosed warranty card to validate your purchase and war-

ranty. You may also register your product online at www. americandj.
com. All returned service items whether under warranty or not, must

be freight pre-paid and accompany a return authorization (R.A.) num­ber. If the unit is under warranty you must provide a copy of your
proof of purchase invoice. Please contact ADJ customer support for a
R.A. number.

Rotobeam 4 Fuse Replacement

Disconnect the unit from its power source. Remove the power cord
from the unit. Once the cord has been removed, you will find that the
fuse holder is located inside the power socket. Insert a flat-head screw
driver into the power socket and gently pry out the fuse holder. Remove
the bad fuse and replace with a new one. The fuse holder also has a
holder for a spare fuse.

Rotobeam 4 Cleaning

Fixture Cleaning:

Due to fog residue, smoke, and dust cleaning the internal and exter­nal optical lenses should be carried out periodically to optimize light
output. Cleaning frequency depends on the environment in which the
fixture operates (I.e. smoke, fog residue, dust, dew). In heavy club use
we recommend cleaning on a monthly basis. Periodic cleaning will
ensure longevity, and crisp output.

1. Use normal glass cleaner and a soft cloth to wipe down the out-

side casing.

2. Clean the external optics with glass cleaner and a soft cloth every
20 days.

3. Always be sure to dry all parts completely before plugging the unit
back in.

ADJ Products, LLC - www.adj.com - Rotobeam 4 User Manual Page 3