ADJ Link User Instructions

iPad not included

©2021 ADJ PRODUCTS LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are
subject to change without notice. ADJ logo and identifying product names and numbers herein are trademarks of ADJ
PRODUCTS LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and in- formation
now allowed by statutory or judicial law or hereinafter granted. Product names used in this document may be trademarks
or registered trademarks of their respective companies and are hereby acknowledged. All non-ADJ brands and product
names are trademarks or registered trademarks of their respective companies.

ADJ PRODUCTS LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building,
and electrical damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a result of the improper, unsafe, insufficient and negligent
assembly, installation, rigging, and operation of this product.

ADJ PRODUCTS LLC USA

6122 S. Eastern Ave. Los Angeles, CA 90040
323-582-2650 | Fax [phone] | www.adj.com | [e-mail]

ADJ SUPPLY Europe B.V

Junostraat 2 6468 EW Kerkrade, The Netherlands
[phone] | Fax [phone] | www.adj.eu | [e-mail]

ADJ PRODUCTS GROUP Mexico

AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000
[phone] | [e-mail]

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.

DOCUMENT VERSION

Due to additional product features and/or enhancements, an updated version
of this document may be available online, along with an App Manual, and or
other supplementary documents.
Please check www.adj.com for the latest revision/update of this user guide, or
to download the App Manual before beginning installation, and/or
programming.

Date Document Version Notes

12/02/20 1 Initial Release

02/25/21 1.5 Updated Specifications

CONTENTS

General Information 4

Limited Warranty 5

Safety Guidelines 6

Overview 7

Faders 8

Matrix Page 9

Matrix Buttons 9

App Shortcut Buttons 10

Jog Wheels 10

Master Fader and Blackout Button 11

USB LED Light 12

Rear Panel 13

Connecting to the Link Controller 14

Rack Mounting Hardware 15

Firmware Updates 16

Technical Specifications 17

3

GENERAL INFORMATION

INTRODUCTION

Please read and understand the instructions in this manual carefully and thoroughly before attempting

to operate this device. These instructions contain important safety and use information.

UNPACKING

Every device has been thoroughly tested and has been shipped in perfect operating condition. Carefully

check the shipping carton for damage that may have occurred during shipping. If the carton is damaged,

carefully inspect the device for damage, and be sure all accessories necessary to install and operate

the device have arrived intact. In the event damage has been found or parts are missing, please contact

our customer support team for further instructions. Please do not return this device to your dealer

without first contacting customer support. Please do not discard the shipping carton in the trash. Please

recycle whenever possible.

BOX CONTENTS

 USB Cable

 USB Light

 DC9V Power Supply

 Rack Mount Kit

CUSTOMER SUPPORT

Contact ADJ Service for any product related service and support needs.

Also visit forums.adj.com with questions, comments or suggestions.

ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST

323-582-2650 | Fax: [phone] | [e-mail]

ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET

[phone] | Fax: [phone] | [e-mail]

4

LIMITED WARRANTY

A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of

manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see specific
warranty period on reverse). This warranty shall be valid only if the product is purchased within the United States
of America, including possessions and territories. It is the owner’s responsibility to establish the date and place of
purchase by acceptable evidence, at the time service is sought.

B. For warranty service, you must obtain a Return Authorization number (RA#) before sending the product back—

please contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to the ADJ
Products, LLC factory. All shipping charges must be prepaid. If the requested repairs or service (including parts
replacement) are within the terms of this warranty, ADJ Products, LLC will pay return shipping charges only to a
designated point within the United States. If the entire instrument is sent, it must be shipped in its original package
and packaging material. No accessories should be shipped with the product. If any accessories are shipped with
the product, ADJ Products, LLC shall incur no liability whatsoever for loss of or damage to any such accessories,
nor for the safe return thereof.

C. This warranty is void if the product serial number and/or labels are altered or removed; if the product is modified

in any manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the
product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior written
authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because it was not
properly maintained as set forth in the product instructions, guidelines and/or user manual.

D. This is not a service contract, and this warranty does not include maintenance, cleaning, or periodic checkup.

During the period specified above, ADJ Products, LLC will replace defective parts at its expense with new or
refurbished parts, and will absorb all expenses for warranty service and repair labor by reason of defects in
material or workmanship. The sole responsibility of ADJ Products, LLC under this warranty shall be limited to the
repair of the product, or replacement thereof, including parts, at the sole discretion of ADJ Products, LLC. All
products covered by this warranty were manufactured after August 15, 2012, and bear identifying marks to that
effect.

E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products without

any obligation to include these changes in any products theretofore manufactured.

F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products

described above. Except to the extent prohibited by applicable law, all implied warranties made by ADJ Products,
LLC in connection with this product, including warranties of merchantability or fitness, are limited in duration to the
warranty period set forth above. And all warranties, whether expressed or implied, including warranties of
merchantability or fitness, are limited in duration to the warranty period set forth above. The consumer’s and/or
dealer’s sole remedy shall be such repair or replacement as is expressly provided above; and under no
circumstances shall ADJ Product, LLC be liable for any loss and/or damage, direct and/or consequential arising
out of the use of, and/or inability to use this product.

G. This warranty is the only written warranty applicable to ADJ Products, LLC products, and supersedes all prior

warranties and written descriptions of warranty terms and conditions heretofore published.

MANUFACTURER’S LIMITED WARRANTY PERIODS:

Non-LED Lighting Products = 1-Year (365 Days) (Including Special Effect Lighting, Intelligent Lighting, UV lighting, Strobes, Fog

Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands, Power/Data Distribution, etc. excluding LED and lamps)

Laser Products = 1-Year (365 Days) (excluding laser diodes which have a 6-Month Limited Warranty)
LED Products = 2-Year (730 Days) (excluding batteries which have a 180 Day Limited Warranty)
NOTE: 2-Year (730 Days) Limited Warranty ONLY applies to product purchased within the United States.
StarTec Series = 1-Year (365 Days) (excluding batteries which have a 180 Day Limited Warranty)
ADJ DMX Controllers = 2 Year (730 Days)
American Audio Products = 1 Year (365 Days)

CUSTOMER SUPPORT INFORMATION

Contact ADJ Service for any product related service and support needs.
Also visit forums.adj.com with questions, comments or suggestions.

ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
323-582-2650 | Fax: [phone] | [e-mail]

ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
[phone] | Fax: [phone] | [e-mail]

5

SAFETY GUIDELINES

This device is an extremely sophisticated piece of electronic equipment. To guarantee a smooth

operation, it is important to follow the guidelines in this manual. The manufacturer of this device will not

accept responsibility for damages resulting from the misuse of this fixture due to the disregard of the

information printed in this manual.

THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS DEVICE.

DO NOT ATTEMPT ANY REPAIRS YOURSELF; DOING SO WILL VOID YOUR

MANUFACTURES WARRANTY. DAMAGES RESULTING FROM MODIFICATIONS TO

THIS PANEL AND/OR THE DISREGARD OF SAFETY INSTRUCTIONS AND GUIDELINES

IN THIS MANUAL VOID THE MANUFACTURES WARRANTY AND ARE NOT SUBJECT

TO ANY WARRANTY CLAIMS AND/OR REPAIRS.

INDOOR / DRY LOCATIONS USE ONLY!

DO NOT EXPOSE DEVICE TO RAIN AND/OR MOISTURE!

DO NOT SPILL WATER AND/OR LIQUIDS ON OR INTO THE DEVICE!

DO NOT operate this device if any cover is open and/or removed.

DO NOT shake device, avoid brute force when installing and/or operating device.

DO NOT expose any part of the device to open flame or smoke. Keep it away from heat sources such

as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

DO NOT use device in extreme hot/humid environments, or handle without ESD precautions.

DO NOT operate device if power cord is frayed, crimped, damaged and/or if any of the power cord

connectors are damaged and do not insert into the panel securely with ease. NEVER force a power

cord connector into the device. If the power cord or any of its connectors are damaged, replace it

immediately with a new one of similar power rating.

ALWAYS disconnect device from main power source before performing any type of service and/or

cleaning procedure. Only handle the power cord by the plug end, never pull out the plug by tugging the

wire portion of the cord.

6