ADJ Krystal Operation Manual

American DJ®

KRYSTAL

Krystal General Introduction

Unpacking: Thank you for purchasing the Krystal by American DJ®.

Every Krystal has been thoroughly tested and has been shipped in
perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears
to be damaged, carefully inspect your unit for any damage and be sure
all equipment necessary to operate the unit has arrived intact. In the
event damage has been found or parts are missing, please contact
our toll free customer support number for further instructions. Please
do not return the unit to your dealer without first contacting customer
support.

8/06

User Instructions

4295 Charter Street

Los Angeles, CA. 90058

www.americandj.com

American DJ®

Introduction: Thank you for purchasing the American DJ® Krystal.

The Krystal is a unique rotating-gobo fixture. The unit comes with one
interchangeable gobo that rotates continuously. The unit has 3-way
mode switch that allows the unit to be operated in three different modes
(see page 5 for operating modes). To optimize beam intensity use this
fixture with a fog machine or other type of special effect smoke.

Customer Support: American DJ® provides a toll free customer sup-

port line, to provide set up help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.americandj.com for any com­ments or suggestions. For service related issue please contact Ameri­can DJ®. Service Hours are Monday through Friday 9:00 a.m. to 5:00
p.m. Pacific Standard Time.
Voice: [phone]
Fax: [phone]
E-mail: [e-mail]

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or fire, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war­ranty. In the unlikely event your unit may require service please contact
American DJ.

PLEASE recycle the shipping carton whenever possible.

©American DJ® - www.americandj.com - Krystal Instruction Manual Page 2

™

Krystal General Instructions Krystal Precautions

Please carefully read and understand the instructions in this manual
thoroughly before attempting to operate this unit. These instructions
contain important safety information regarding the use and mainte­nance of this unit. Please keep this manual with the unit, for future
reference.

Krystal Warranty Registration

The Krystal carries a one year (365 days) limited warranty. Please fill
out the enclosed warranty card to validate your purchase. All

returned
service items whether under warranty or not, must be freight pre-paid
and accompany a return authorization (R.A.)

number. If the unit is
under warranty you must provide a copy of your proof of purchase
invoice. Please contact American DJ

® customer support for a R.A.

number.

Krystal Cleaning

Fixture Cleaning:

Due to fog residue, smoke, and dust cleaning the internal and exter­nal lenses should be carried out periodically to optimize light output.

1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.

2. Clean the external optics with glass cleaner and a soft cloth every
20 days.

4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.

5. Always be sure to dry all parts completely before plugging the unit
back in.

Cleaning frequency depends on the environment in which the fixture
operates (I.e. smoke, fog residue, dust, dew). In heavy use we rec
ommend cleaning on a monthly basis. Periodic cleaning will ensure
longevity, and crisp beam output.

Safety Issues: This unit may blow the fuse if the maximum allotted load
of 5 amps is reached. If the fuse needs replacement, always replace the
fuse with same exact type that was remove, unless otherwise instructed
by an authorized American DJ® service technician. Use of a different type
fuse from that which is recommended may cause fire or electric shock
and will void the manufactures warranty.

• To reduce the risk of electrical shock or fire, do not expose this unit
rain or moisture

• Do not spill water or other liquids into or on to your unit

• Do not attempt to operate this unit if the power cord has been frayed
or broken

• Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical
shock and fire in case of an internal short

• Disconnect from main power before making any type of connection

• Do not remove the cover under any conditions. There are no user
serviceable parts inside

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall

• Do not attempt to operate this unit, if it becomes damaged

• This unit is intended for indoor use only, use of this product outdoors
voids all warranties

• During long periods of non-use, disconnect the unit’s main power

• Always mount this unit in safe and stable matter

• Power cords should be routed so they are not likely to be walked on,
pinched by items placed upon or against them.

• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 3 for cleaning details

• Heat -The appliance should be situated away from heat sources such
as radiators, heat registers, stoves, or other appliances (including

-

amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The unit has been exposed to rain or water.
D. The unit does not appear to operate normally or exhibits a
marked change in performance.

©American DJ® - www.americandj.com - Krystal Instruction Manual Page 4©American DJ® - www.americandj.com - Krystal Instruction Manual Page 3