ADJ FLASH-KLING-BATTEN-B Users Manual
FLASH KLING BATTEN
©2015 ADJ Products, LLC all rights reserved. Information,
specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all aliated companies hereby disclaim any and all liabilities for property, equipment, building, and
electrical damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of any
information contained within this document, and/or as a result
of the improper, unsafe, unsucient and negligent assembly,
installation, rigging, and operation of this product.
4/15
User Instructions
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
Flash Kling Batten General Instructions Flash Kling Batten Introduction
Unpacking: Thank you for purchasing the Flash Kling Batten by ADJ
Products, LLC. Every Flash Kling Batten has been thoroughly tested
and has been shipped in perfect operating condition. Carefully check
the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your xture for any damage and be sure all accessories necessary to operate
the unit has arrived intact. In the case damage has been found or parts
are missing, please contact our toll free customer support number for
further instructions. Do not return this unit to your dealer without rst
contacting customer support.
Introduction: The Flash Kling Batten is a LED pixel panel for low
resolution, video displays. This LED panel is controlled via Kling-Net
or Art-Net. Recommended control solutions; Arkaos Media Master
Express, Media Master Pro, and LED Master software’s (sold separately). Dynamic effects can be played on it, which makes it a great
system for night clubs.
Customer Support: ADJ Products, LLC provides a toll free cus-
tomer support line, to provide set up help and to answer any question
should you encounter problems during your set up or initial operation.
You may also visit us on the web at www.adj.com for any comments
or suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures warranty. In the unlikely event your unit may require service please contact
ADJ Products, LLC.
PLEASE recycle the shipping carton when ever possible.
To optimize the performance of this product, please read these operating instructions carefully to familiarize yourself with the basic operations
of this unit. These instructions contain important safety information
regarding the use and maintenance of this unit. Please keep this manual
with the unit, for future reference.
Flash Kling Batten Features
• CAT 5 Straight Network Cable included.
• Kling-Net and Art-Net Compatible (Recommended control solu tions; Arkaos Media Master Express, Media Master Pro, and LED
Master software’s (sold separately).
• 160 x 0.164W SMD RGB LED’s
Flash Kling Batten Warranty Registration
The Flash Kling Batten carries a 2 year (730 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase
and warranty. You may also register your product online at www.
americandj.com. All returned service items whether under warranty or
not, must be freight pre-paid and accompany a return authorization
(R.A.) number. If the unit is under warranty you must provide a copy
of your proof of purchase invoice. Please contact ADJ customer support for a R.A. number.
Flash Kling Batten DMX Workshop™
DMX WORKSHOP™ (alternative software option to congure network
settings)
DMX-Workshop™ is a fully featured network management, analysis, conguration and diagnostics tool for Art-Net networks. It can
be used to congure the Ethernet network settings on this xture
remotely such as the IP Address, Subnet Mask, and the DMX Universe. This software application is Windows XP™ and Windows 7™
compatible and is free of charge and available via download. (See link
below)
http://artisticlicence.com/index.php?mode=products&sub=overview&
action=&product_id=351
ADJ Products, LLC - www.adj.com - Flash Kling Batten Instruction Manual Page 3ADJ Products, LLC - www.adj.com - Flash Kling Batten Instruction Manual Page 2
Loading...