ADJ EZ Kling elation_EZ_KLING_user_manual_071916.pdf

Download

Page 1

ELATION

EZ KLING

™

EZ KLING™

user manual

Page 2

www.elationlighting.com

©2016 ELATION PROFESSIONAL all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ELATION PROFESSIONAL logo and identifying product names and numbers herein are trademarks of ELATION PROFESSIONAL. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted. Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. All non-ELATION brands and product names are trademarks or registered trademarks of their respective companies.

ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with the use or reliance of any information contained within this document, and/or as a result of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and operation of this product.

Elation Professional USA | 6122 S. Eastern Ave. | Los Angeles, CA. 90040

323-582-3322 | 323-832-9142 fax | www.elationlighting.com | info@elationlighting.com

Elation Professional B.V. | Junostraat 2 | 6468 EW Kerkrade, The Netherlands

+31 45 546 85 66 | +31 45 546 85 96 fax | www.elationlighting.eu | info@elationlighting.eu

DOCUMENT VERSION

Please check www.elationlighting.com for the latest revision/update of this manual.

Date

7/2014 1

2/2015 2 ≥1.7

Document

Version

Software

Version

≥1.6

Notes

Initial release.

Increased max number of pixel control when using KLINGNET and

RGB LED lighting to 170 pixels.

5/27/16 3

7/19/16 4

≥2.2

≥2.3

Added sACN support and increased max number of pixel control

using KLINGNET AND RGBA/RGBW QUAD LED Lighting to 128 pixels.

Added Art-Net 3 Unicast support and LCD display lockout feature,

and changed ESTA CAN mode spelling to sACN.

2 EZ KLING™ User Manual

Page 3

CONTENTS

General Information

Warranty

Safety Information

Device Overview

Installation

System Menu

DMX Operation

Important Notes

Menu Function

Configuration Guide

Setup Guide

Technical Specifications

Optional Accessories

www.elationlighting.com

3 EZ KLING™ User Manual

Page 4

www.elationlighting.com

GENERAL INFORMATION

INTRODUCTION

Congratulations, you have just purchased one of the most innovative and reliable RJ45 to DMX, KlingNet™, Art-Net™, and sACN interface on the market today! The device has been designed to perform reliably for years when the guidelines in this booklet are followed. Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit. These instructions contain important information regarding safety during use and maintenance.

UNPACKING

Every device has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your unit for damage and be sure all accessories necessary to operate the unit have arrived intact. In the event damage has been found or parts are missing, please contact our customer support team for further instructions. Please do not return this unit to your dealer without first contacting customer support at the number listed below. Please do not discard the shipping carton in the trash. Please recycle whenever possible.

BOX CONTENTS

 (1) 5V Power Supply

 (1) Flex Pixel Tape Jumper First Cable

 (1) Mounting Bracket & (2) Screws

 Manual & Warranty Card

4 EZ KLING™ User Manual

Page 5

www.elationlighting.com

CUSTOMER SUPPORT

Elation Professional® provides a customer support line, to provide set up help and

to answer any question should you encounter problems during your set up or

initial operation. You may also visit us on the web at www.elationlighting.com for

any comments or suggestions. For service related issue please contact Elation

Professional®.

ELATION SERVICE USA - Monday - Friday 8:00am to 5:00pm PST

Voice: 323-582-3322 Fax: 323-832-9142

E-mail: support@elationlighting.com

ELATION SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET

Voice: +31 45 546 85 30 Fax: +31 45 546 85 96

E-mail: support@elationlighting.eu

WARRANTY REGISTRATION

Please complete and mail in the enclosed warranty card or register online:

http://www.elationlighting.com/Login.aspx to validate your purchase. All

returned service items whether under warranty or not, must be freight pre-paid

and accompany a return authorization (R.A.) number. The R.A. number must be

clearly written on the outside of the return package. A brief description of the

problem as well as the R.A. number must also be written down on a piece of

paper and included in the shipping container. If the unit is under warranty, you

must provide a copy of your proof of purchase invoice. Items returned without a

R.A. number clearly marked on the outside of the package will be refused and

returned at customer’s expense. You may obtain a R.A. number by contacting

customer support.

IMPORTANT NOTICE!

There are no user serviceable parts inside this unit. Do not attempt any repairs

yourself; doing so will void your manufactures warranty. Damages resulting from

modifications to this fixture and/or the disregard of safety and general user

instructions found in this user manual void the manufactures warranty and are

not subject to any warranty claims and/or repairs.

5 EZ KLING™ User Manual

Page 6

www.elationlighting.com

LIMITED WARRANTY

A. Elation Professional® hereby warrants, to the original purchaser, Elation Professional® products to

be free of manufacturing defects in material and workmanship for a period of two years (730 days),

and Elation Professional® product rechargeable batteries to be free of manufacturing defects in

material and workmanship for a period of six months (180 days), from the original date of purchase.

This warranty excludes discharge lamps and all product accessories. This warranty shall be valid only if

the product is purchased within the United States of America, including possessions and territories. It is

the owner’s responsibility to establish the date and place of purchase by acceptable evidence, at

the time service is sought.

B. For warranty service, send the product only to the Elation Professional® factory. All shipping

charges must be pre-paid. If the requested repairs or service (including parts replacement) are within

the terms of this warranty, Elation Professional® will pay return shipping charges only to a designated

point within the United States. If any product is sent, it must be shipped in its original package and

packaging material. No accessories should be shipped with the product. If any accessories are

shipped with the product, Elation Professional® shall have no liability what so ever for loss and/or or

damage to any such accessories, nor for the safe return thereof.

C. This warranty is void if the product serial number and/or labels are altered or removed; if the

product is modified in any manner which Elation Professional® concludes, after inspection, affects

the reliability of the product; if the product has been repaired or serviced by anyone other than the

Elation Professional® factory unless prior written authorization was issued to purchaser by Elation

Professional®; if the product is damaged because not properly maintained as set forth in the product

instructions, guidelines and/or user manual.

D. This is not a service contract, and this warranty does not include any maintenance, cleaning or

periodic check-up. During the periods as specified above, Elation Professional® will replace

defective parts at its expense, and will absorb all expenses for warranty service and repair labor by

reason of defects in material or workmanship. The sole responsibility of Elation Professional® under

this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at

the sole discretion of Elation Professional®. All products covered by this warranty were manufactured

after January 1, 1990, and bare identifying marks to that effect.

E. Elation Professional® reserves the right to make changes in design and/or performance

improvements upon its products without any obligation to include these changes in any products

theretofore manufactured.

F. No warranty, whether expressed or implied, is given or made with respect to any accessory

supplied with the products described above. Except to the extent prohibited by applicable law, all

implied warranties made by Elation Professional® in connection with this product, including

warranties of merchantability or fitness, are limited in duration to the warranty periods set forth above.

And no warranties, whether expressed or implied, including warranties of merchantability or fitness,

shall apply to this product after said periods have expired. The consumer’s and/or dealer’s sole

remedy shall be such repair or replacement as is expressly provided above; and under no

circumstances shall Elation Professional® be liable for any loss and/or damage, direct and/or

consequential, arising out of the use of, and/or the inability to use, this product.

G. This warranty is the only written warranty applicable to Elation Professional® products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published.

6 EZ KLING™ User Manual

Page 7

SAFETY INFORMATION

is an extremely sophisticated piece of electronic equipment. To

guarantee a smooth operation, it is important to follow the guidelines in this

cept responsibility for

e due to the disregard of

. It’s essential this device be

perform all electrical

This device

www.elationlighting.com

manual. The manufacturer of this device will not ac

damages resulting from the misuse of this devic

the information printed in this manual.

This device falls under PROTECTION CLASS 1

grounded properly. Only qualified personnel should

connections.

DO NOT PLUG DEVICE INTO A DIMMER PACK!

INDOORS USE ONLY!

DO NOT EXPOSE DEVICE TO RAIN AND MOISTURE!

 NEVER OPEN THIS DEVICE!

 For proper operation, follow the Installation guidelines described in this manual.

Only qualified and certified personnel should perform installation of this device.

Any modifications will void the original manufactures warranty and increase the

risk of damage and/or personal injury.

 DO NOT operate this device if the power supply and/or cord has become frayed,

crimped and/or damaged. If the power supply and/or cord is damaged,

replace it immediately with a new one of similar power rating.

 DO NOT operate device in locations above 113°F (45°C) or below 14° F (-10° C).

 DO NOT attempt installation and/or operation without knowledge how to do so.

 DO NOT shake fixture, avoid brute force when installing and/or operating device.

 This device is designed for INDOOR / DRY LOCATIONS ONLY on stage, in

nightclubs, theatres, etc.

 Please make sure there are NO FLAMMABLE MATERIALS close to the device while

operating, to prevent any fire hazard.

 When installing this device in a suspended environment, always use an

appropriate safety cable.

 Use the original packaging and materials to transport the fixture in for service.

7 EZ KLING™ User Manual

Page 8

DEVICE OVERVIEW

www.elationlighting.com

1. MODE Button

2. SETUP Button

3. UP Button

4. DOWN Button

5. Bare Wire Terminal Block

6. 3pin DMX Output

7. 3pin DMX Input

8. Power Input

9. RJ45 Network IN/OUT

10. LCD Menu Display

8 EZ KLING™ User Manual

Page 9

INSTALLATION

t (1.5m) away from any

A qualified electrician should be used for all

www.elationlighting.com

FLAMMABLE MATERIAL WARNING

Keep fixture at least 5.0 fee flammable materials, decorations, pyrotechnics, etc.

ELECTRICAL CONNECTIONS

electrical connections and/or installations.

CAUTIONS

 For added protection, mount the device in areas outside walking paths, seating

areas, or in areas were unauthorized personnel might reach the fixture.

 Before mounting the device to any surface, make sure the installation area can

hold a minimum point load of 10 times the weight of the fixture.

 Device installation must always be secured with a secondary safety attachment,

such as an appropriate safety cable.

 Never stand directly below the device when mounting, removing or servicing.

 The applicable operating temperature for the device is between 14°F to 113°F

(-10°C - 45°C). Do not use the device under or above this temperature range.

INSTALLATION VIA MAGNET ON BACK PANEL OR INCLUDED MOUNTING BRACKET

(Clamp shown not included)

9 EZ KLING™ User Manual

Page 10

www.elationlighting.com

SYSTEM MENU

The device has an easy to navigate system menu. The next section will detail the

functions of each command in the system menu.

LCD MENU CONTROL PANEL

The control panel (see image below) located on the front of the device allows you

to access the main menu and make all necessary adjustments to the device. During

normal operation, pressing the MODE button will scroll through the different menus.

Once the desired menu has been selected, press the SETUP button to activate the

menu item and sub-menus. Once you reach a field that requires adjusting, press the

UP and DOWN buttons to adjust the field. You may exit a menu at any time without

making any adjustments by pressing the MODE button.

NOTE: The LCD Menu Control Display will lockout after 30 seconds of no use.

Press and hold the MODE button for 3 seconds to unlock the LCD display.

10 EZ KLING™ User Manual

Page 11

DMX Channel

DMX Value

Function

000-255

RED (0% - 100%)

000-255

GREEN (0% - 100%)

000-255

BLUE (0% - 100%)

  

000-255

RED (0% - 100%)

000-255

GREEN (0% - 100%)

000-255

BLUE (0% - 100%)

DMX Channel

DMX Value

Function

000-255

RED (0% - 100%)

000-255

GREEN (0% - 100%)

000-255

BLUE (0% - 100%)

4 000-255

AMBER/WHITE (0% - 100%)

  

000-255

RED (0% - 100%)

000-255

GREEN (0% - 100%)

000-255

BLUE (0% - 100%)

000-255

AMBER/WHITE (0% - 100%)

www.elationlighting.com

DMX OPERATION

When controlling RGB 3in1 LED lighting, the lighting must be set to DMX mode and must include a separate dimmer control for each color (RED, GREEN, BLUE).

When controlling RGBA/RGBW Quad LED lighting, the lighting must be set to DMX mode and must include a separate dimmer control for each color (RED, GREEN, BLUE, AMBER, and/or RED, GREEN, BLUE, WHITE).

The total number of DMX channels will depend on how many individual pixels the LED lighting has.

EXAMPLE 1

If an RGB 3in1 LED light fixture has (6) pixels, it must be set to 18 DMX Channel Mode and the DMX protocol be set to the following:

EXAMPLE 2

If an RGBA/RGBW 4in1 LED light fixture has 6 pixels, it must be set to 24 DMX Channel Mode and the DMX protocol be set to the following:

DMX ADDRESSING

The DMX address of the first LED lighting device connected to EZ KLING™ must be set

to 1 and the DMX addresses of additional LED lighting devices will depend on how

many DMX channels each device occupies. For example, if the LED lighting devices

all occupy 20 DMX channels each, the first device would be addressed as 1, the second device as 21, the third device as 41, and so on.

11 EZ KLING™ User Manual

Page 12

Maximum Pixel Control Per Each EZ KLING™

www.elationlighting.com

IMPORTANT NOTES

EZ KLING™ can control LED Tape, RGB Tri-Color LED Lighting and RGBA/RGBW Quad

LED Lighting. Be sure EZ KLING™ has been set to the proper mode to control the

desired type of LED Tape and or Lighting.

When Connecting EZ KLING™ To

DMX Controller + LED Tape 170 Pixels

Computer + KLINGNET™ + LED Tape 600 Pixels

Computer + KLINGNET™ + RGB Tri-Color LED Lighting 170 Pixels

Computer + KLINGNET™ + RGBA/RGBW Quad LED Lighting 128 Pixels

Computer + ART-NET™ + LED Tape 170 Pixels

Computer + ART-NET™ + RGB Tri-Color LED Lighting 170 Pixels

Computer + ART-NET™ + RGBA/RGBW Quad LED Lighting 128 Pixels

Computer + sACN + LED Tape 170 Pixels

Computer + sACN + RGB Tri-Color LED Lighting 170 Pixels

Computer + sACN + RGBA/RGBW Quad LED Lighting 128 Pixels

 When connecting to a computer to control LED Lighting, the LED type of LED

lighting controlled by the same EZ KLING™ unit must be the same.

 DO NOT directly daisy chain more than (32) EZ KLING™ units together.

 When connecting EZ KLING™ to a network switch to control multiple devices, a

Gigabit Ethernet Switch that supports IGMP (Internet Group Management

Protocol) is required. Using a Gigabit Ethernet Switch that does not support IGMP

can cause erratic behavior of all connected devices to the switch.

Click link below for more information about IGMP.

https://en.wikipedia.org/wiki/Internet_Group_Management_Protocol

12 EZ KLING™ User Manual

Page 13

ELATION© EZ KLING™

S Y S T E M M E N U

Supports Software Version ≥2.2

Features are subject to change without any prior written notice.

www.elationlighting.com

MENU FUNCTION [software version ≥ 2.2]

EZ KLING™ has (5) operation modes: KLINGNET, ARTNET, ESTA ACN, OPTION, and LED TAPE,

which can be selected by pressing the MODE button.

MODE

BUTTON

KLINGNET

ARTNET

ESTA CAN

OPTION

LED TAPE

SETUP BUTTON

DMX RGB

RGB TAPE

OUT:TAPE

OUT: DMX

DMX U: 0000 - 63999 (00001)

TAPE U: 0000 - 63999 (00001)

BLGT: OFF, ON LCD Backlight Control (OFF = Off after 20 secs)

BRCO: 000 - 100 LCD Backlight Brightness (100= Full Brightness)

SYSRESET Press UP and DOWN buttons together to reset Initialize unit back to factory default settings

0000 0000 - xxxx (0170) Set number of Tape Pixels to control

UP/DOWN (OPTIONS) BUTTONS (Default in BOLD)

RGB, RGBW, or RGBA Control RGB LED Lighting using KLINGNET

H: 000 000 - xxx (008) Set Pixel Height number to control

W: 000 000 - xxx (008) Set Pixel Width number to control

Control LED Tape using KLINGNET

H: 000 000 - xxx (072) Set Pixel Height number to control

W: 000 000 - xxx (008) Set Pixel Width number to control

Control LED Tape using Art-Net 2

IP0: 000 - 255 (010) Set IP Address Section 0

IP1: 000 - 255 (073) Set IP Address Section 1

IP2: 000 - 255 (068) Set IP Address Section 2

IP3: 000 - 255 (087) Set IP Address Section 3

SW0: 000 - 255 (255) Set Subnet Mask Section 0

SW1: 000 - 255 (255) Set Subnet Mask Section 1

SW2: 000 - 255 (000) Set Subnet Mask Section 2

SW3: 000 - 255 (000) Set Subnet Mask Section 3

U: 0000 - 32768 (00001) Set output DMX Universe

Control LED Lighting using Art-Net 2

IP0: 000 - 255 (010) Set IP Address Section 0

IP1: 000 - 255 (073) Set IP Address Section 1

IP2: 000 - 255 (068) Set IP Address Section 2

IP3: 000 - 255 (087) Set IP Address Section 3

SW0: 000 - 255 (255) Set Subnet Mask Section 0

SW1: 000 - 255 (255) Set Subnet Mask Section 1

SW2: 000 - 255 (000) Set Subnet Mask Section 2

SW3: 000 - 255 (000) Set Subnet Mask Section 3

U: 0000 - 32768 (00001) Set output DMX Universe

Control RGB LED Lighting using sACN

Set output DMX Universe

Control LED Tape using sACN

Set output DMX Universe

DESCRIPTION

13 EZ KLING™ User Manual

Page 14

ELATION© EZ KLING™

S Y S T E M M E N U

Supports Software Version ≥2.3

Features are subject to change without any prior written notice.

www.elationlighting.com

MENU FUNCTION [software version ≥ 2.3]

EZ KLING™ has (6) operation modes: KLINGNET, ARTNET_M, sACN, OPTION, ARTNET_U and

LED TAPE, which can be selected by pressing the MODE button.

MODE

BUTTON

KLINGNET

ARTNET_M

sACN

SETUP BUTTON

DMX RGB

RGB TAPE

OUT: TAPE

OUT: DMX

DMX U: 0000 - 63999 (00001)

TAPE U: 0000 - 63999 (00001)

UP/DOWN (OPTIONS) BUTTONS (Default in BOLD)

RGB, RGBW, or RGBA Control RGB LED Lighting using KLINGNET

H: 000 000 - xxx (008) Set Pixel Height number to control

W: 000 000 - xxx (008) Set Pixel Width number to control

Control LED Tape using KLINGNET

H: 000 000 - xxx (072) Set Pixel Height number to control

W: 000 000 - xxx (008) Set Pixel Width number to control

Control LED Tape using Art-Net 3 Multicast

IP0: 000 - 255 (010) Set IP Address Section 0

IP1: 000 - 255 (073) Set IP Address Section 1

IP2: 000 - 255 (068) Set IP Address Section 2

IP3: 000 - 255 (087) Set IP Address Section 3

SW0: 000 - 255 (255) Set Subnet Mask Section 0

SW1: 000 - 255 (255) Set Subnet Mask Section 1

SW2: 000 - 255 (000) Set Subnet Mask Section 2

SW3: 000 - 255 (000) Set Subnet Mask Section 3

U: 0000 - 32768 (00001) Set output DMX Universe

Control LED Lighting using Art-Net 3 Multicast

IP0: 000 - 255 (010) Set IP Address Section 0

IP1: 000 - 255 (073) Set IP Address Section 1

IP2: 000 - 255 (068) Set IP Address Section 2

IP3: 000 - 255 (087) Set IP Address Section 3

SW0: 000 - 255 (255) Set Subnet Mask Section 0

SW1: 000 - 255 (255) Set Subnet Mask Section 1

SW2: 000 - 255 (000) Set Subnet Mask Section 2

SW3: 000 - 255 (000) Set Subnet Mask Section 3

U: 0000 - 32768 (00001) Set output DMX Universe

DESCRIPTION

Control RGB LED Lighting using sACN

Set output DMX Universe

Control LED Tape using sACN

Set output DMX Universe

14 EZ KLING™ User Manual

Page 15

ELATION© EZ KLING™

S Y S T E M M E N U

Supports Software Version ≥2.3

MODE

LED TAPE

BUTTON

OPTION

ARTNET_U

Features are subject to change without any prior written notice.

SETUP BUTTON

BLGT: OFF, ON LCD Backlight Control (OFF = Off after 20 secs)

BRCO: 000 - 100 LCD Backlight Brightness (100= Full Brightness)

SYSRESET Press UP and DOWN buttons together to reset Initialize unit back to factory default settings

OUT:TAPE

OUT: DMX

0000 0000 - xxxx (0170) Set number of Tape Pixels to control

UP/DOWN (OPTIONS) BUTTONS (Default in BOLD)

Control LED Tape using ART-NET 3 Unicast

IP0: 000 - 255 (010) Set IP Address Section 0

IP1: 000 - 255 (073) Set IP Address Section 1

IP2: 000 - 255 (068) Set IP Address Section 2

IP3: 000 - 255 (087) Set IP Address Section 3

SW0: 000 - 255 (255) Set Subnet Mask Section 0

SW1: 000 - 255 (255) Set Subnet Mask Section 1

SW2: 000 - 255 (000) Set Subnet Mask Section 2

SW3: 000 - 255 (000) Set Subnet Mask Section 3

U: 0000 - 32768 (00001) Set output DMX Universe

Control LED Lighting using ART-NET 3 Unicast

IP0: 000 - 255 (010) Set IP Address Section 0

IP1: 000 - 255 (073) Set IP Address Section 1

IP2: 000 - 255 (068) Set IP Address Section 2

IP3: 000 - 255 (087) Set IP Address Section 3

SW0: 000 - 255 (255) Set Subnet Mask Section 0

SW1: 000 - 255 (255) Set Subnet Mask Section 1

SW2: 000 - 255 (000) Set Subnet Mask Section 2

SW3: 000 - 255 (000) Set Subnet Mask Section 3

U: 0000 - 32768 (00001) Set output DMX Universe

www.elationlighting.com

DESCRIPTION

15 EZ KLING™ User Manual

Page 16

www.elationlighting.com

KLINGNET MODE

DMX RGB | LED Color Set | Pixel Height and Width Set

Press the MODE button to select "KLINGNET" and the LCD display will show "DMX

RGB" with "DMX" flashing. To change this menu item press the SET UP button and

"RGB" will start to flash, then press the UP or DOWN buttons to select the desired LED

Color Set ("DMX RGB", "DMX RGBW", or "DMX RGBA"), then press SET UP button.

The LCD display will now show "H: xxx", press the UP or DOWN buttons to enter the

desired Pixel Height number EZ KLING™ needs to control, then press the SET UP button.

The LCD display will now show "W: xxx", press the UP or DOWN buttons to enter the

desired Pixel Width number EZ KLING™ needs to control, then press the MODE button.

RGB TAPE| LED Color Set | Pixel Height and Width Set

Press the MODE button to select "KLINGNET" and the LCD display will show "DMX

RGB" with "DMX" flashing. To change this menu item press the UP or DOWN buttons to

select "RGB TAPE", and the LCD display will show "RGB TAPE" with "TAPE" flashing, then

press the SET UP button.

The LCD display will now show "H: xxx", press the UP or DOWN buttons to enter the

desired Pixel Height number EZ KLING™ needs to control, then press the SET UP button.

The LCD display will now show "W: xxx", press the UP or DOWN buttons to enter the

desired Pixel Width number EZ KLING™ needs to control, then press the MODE button

to confirm and exit.

NOTE: The Pixel Height number multiplied by the Pixel Width number can NOT be

greater than 600 pixels when controlling LED Tape, or NOT greater than 170 pixels

when controlling RGB Tri-Color LED Lighting, and NOT greater than 128 pixels when

controlling RGBW/RGBA LED Lighting.

16 EZ KLING™ User Manual

Page 17

www.elationlighting.com

ARTNET_M MODE (Art-Net 3 Multicast)

IP Address Set, Sub Net Mask Set, and DMX Universe Output Set

Press the MODE button to select "ARTNET_M". The LCD display will show "OUT:TAPE" or

"OUT:DMX". Select one of these two menu items by pressing the UP or DOWN buttons.

Press the SET UP button to select IP Address Set. The LCD display will show "ARTNET IP0:

×××" then press the UP or DOWN buttons to enter the desired 3-digit IP Address of

Section 1, then press the SET UP button to select "ARTNET IP1: ×××" and press the UP or

DOWN buttons to enter the desired 3-digit IP Address of Section 2, then press the SET

UP button to select "ARTNET IP2: ×××" and press the UP or DOWN buttons to enter the

desired 3-digit IP Address of Section 3, then press the SET UP button to select "ARTNET

IP3: ×××" and press the UP or DOWN buttons to enter the desired 3-digit IP Address of

Section 4.

Once the complete desired IP Address Set has been entered, continue by pressing

the SET UP button and the LCD display will show "SW0: ×××", then press the UP or DOWN

buttons to enter the desired 3-digit Subnet Mask of Section 1, then press the SET UP

button to select "SW1: ×××" and press the UP or DOWN buttons to enter the desired

3-digit Subnet Mask of Section 2, then press the SET UP button to select "SW2: ×××" and

press the UP and DOWN buttons to enter the desired the 3-digit Subnet Mask of Section

3, then press the SET UP button to select "SW3: ×××" and press the UP or DOWN

buttons to enter the desired 3-digit Subnet Mask of section 4.

Once the complete desired Sub Net Mask has been entered, continue by pressing

the SET UP button and the LCD display will show "U: ЧЧЧЧЧ", then press the UP or DOWN

buttons to enter the desired universe address “U: 00001-32768” and press the MODE

button to confirm and exit.

NOTE: All changes made to the ARTNET_M mode are automatically also made to the

ARTNET_U mode. The same applies to all changes made to the ARTNET_U mode;

these are also automatically made to the ARTNET_M mode.

For more information about Art-Net, click on the link below.

http://art-net.org.uk/

17 EZ KLING™ User Manual

Page 18

www.elationlighting.com

sACN MODE (ESTA CAN MODE in software version 2.2)

Press the MODE button to select "sACN". The LCD display will show “DMX” or “TAPE”

Select one of these two menu items by pressing the UP or DOWN buttons. After

choosing “DMX” or “TAPE”, select the desired universe address “U: 00001-63999” and

press the MODE button to confirm and exit.

For more information about sACN, click on the link below.

http://artisticlicenceintegration.com/?page_id=2600

OPTION MODE

BLGT: LCD Backlight ON/OFF

Press MODE button to select "OPTION". Select the desired function of the LCD

Backlight, "BLGT:ON" (LCD Backlight will remain ON in any situation) or "BLGT:OFF"

(LCD Backlight will automatically turn OFF after 20 seconds of no operation). Select

one of these two menu items by pressing the UP or DOWN buttons.

BRCO: LCD Backlight Brightness

Press MODE button to select "OPTION", then press SET UP button to select "BRCO: xxx".

Adjust LCD Backlight Brightness level by pressing UP or DOWN buttons to adjust the

value from (000) not bright to (100) very bright.

System Reset

Press MODE button to select "OPTION", then press SET UP button to select "SYSRESET",

which will start to flash. While "SYSRESET" is still flashing, press UP and DOWN buttons at

the same time and all the settings will be reset back to factory defaults.

CAUTION - DOING WILL ERASE ALL PREVIOUSLY SAVED SETTINGS!

18 EZ KLING™ User Manual

Page 19

www.elationlighting.com

ARTNET_U MODE (Art-Net 3 Unicast)

IP Address Set, Sub Net Mask Set, and DMX Universe Output Set

Press the MODE button to select "ARTNET_U". The LCD display will show "OUT:TAPE" or