ADJ Entour Haze Pro User guide

ENTOUR HAZE PRO

©2017 ADJ Products, LLC all rights reserved. Information,

specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis­claim any and all liabilities for property, equipment, building, and
electrical damages, injuries to any persons, and direct or indi­rect economic loss associated with the use or reliance of any
information contained within this document, and/or as a result
of the improper, unsafe, unsucient and negligent assembly,
installation, rigging, and operation of this product.

Caution: Haze Machines may set o Smoke Alarms!

User Instructions

DOCUMENT VERSION

Please check www.adj.com for the latest revision/update of this guide.

Date

10/24/17

Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!

Document

Version

1 1.01

Software

Version

DMX

Channel

>

Modes

1/2/4 Initial Release

Notes

Entour Haze Pro Introduction

Entour Haze Pro Safety Precautions

Introduction: Congratulations, you have just purchased one of the

most reliable haze machines on the market today! The Entour Haze Pro
faze machine have been designed to perform reliably for years when
the guidelines in this booklet are followed. Please read and understand

the instructions in this manual carefully and thoroughly before attempt­ing to operate this unit. These instructions contain important informa­tion regarding safety during use and maintenance.

Customer Support: ADJ Products, LLC provides a toll free customer

support line, to provide set up help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.adj.com for any comments or
suggestions. For service related issue please contact ADJ Products,
LLC. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.
Pacic Standard Time.
Voice: [phone]
Fax: [phone]
E-mail: [e-mail]

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war­ranty. In the unlikely event your unit may require service please contact
ADJ Products, LLC.

Do not discard the shipping cartoon in the trash. Please recycle when
ever possible.

SAFETY ISSUES:

NEVER POINT OR AIM A HAZE MACHINE TOWARDS PEOPLE OR
THEIR CLOTHING. THIS UNIT EMITS HOT VAPOR AND SHOULD
BE USED WITH THE SAME CARE THAT YOU WOULD OBSERVE
WHEN USING AN ELECTRIC KETTLE OR IRON.

Please Note: Specications and improvements in the design of
this unit and this manual are subject to change without any prior
written notice.

• Be sure to save the packing carton in the unlikely event the unit
may have to be returned for service

• Do not spill water or other liquids into or on to your hazer. Be
sure that all the haze uid is kept inside the uid reservoir

• Be sure that the local power outlet match that or the required
voltage for your haze machine

• Do not remove the top cover under any conditions. There are no
user serviceable parts inside

• Disconnect the unit’s main power when left unused for long peri-

ods of time

• Never connect this unit to a dimmer pack

• Do not attempt to operate this unit, if it becomes damaged in anyway

• Never operate this unit when it’s cover is removed

• To reduce the risk of electrical shock or re, do not expose this
unit rain or moisture

• Do not attempt to operate this unit if the power cord has been fray­ ed or broken. Do not attempt to remove or break o the ground
prong from the electrical cord. This prong is used to reduce the
risk of electrical shock and re in case of an internal short

• Disconnect from main power before making any type of connection

• Never block the ventilation holes. Always be sure to mount this
unit in an area that will allow proper ventilation. Allow about 6”
(15cm) between this device and a wall

• This unit is intended for indoor use only, use of this product out­ doors voids all warranties

• Always mount this unit in a safe and stable matter

• Please route your power cord out of the way of foot trac. Power
cords should be routed so they are not likely to be walked on,
pinched by items placed upon or against them

• The unit should only be serviced by qualified service personnel
when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The unit has been exposed to rain or water.
D. The appliance does not appear to operate normally or
exhibits a marked change in performance.

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 2

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 3

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

DMX512

DMX+,DMX-,COMMON

1

2

3

Termination reduces signal errors and
avoids signal transmission problems
and interference. It is always advisable
to connect a DMX terminal, (Resistance
120 Ohm 1/4 W) between PIN 2 (DMX-)
and PIN 3 (DMX +) of the last fixture.

POWER

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

and PIN 3 (DMX +) of the last fixture.

Entour Haze Pro DMX Information Entour Haze Pro DMX Information

Power Supply: Before plugging your unit in, be sure the source volt-

age in your area matches the required voltage for your ADJ Entour Haze
Pro. The ADJ Entour Haze Pro is available in a 120v and 230v version.
Because line voltage may vary from venue to venue, you should be
sure your unit voltage matches the wall outlet voltage before attempt­ing to operate you xture.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used as a form of communication between intelligent fixtures
and controllers. A DMX controller sends DMX data instructions from
the controller to the fixture. DMX data is sent as serial data that trav­els from fixture to fixture via the DATA “IN” and DATA “OUT” XLR ter­minals located on all DMX fixtures (most controllers only have a DATA
“OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of
dierent manufactures to be linked together and operate from a single
controller, as long as all xtures and the controller are DMX compli­ant. To ensure proper DMX data transmission, when using several
DMX fixtures try to use the shortest cable path possible. The order
in which fixtures are connected in a DMX line does not influence the
DMX addressing. For example; a fixture assigned a DMX address of 1
may be placed anywhere in a DMX line, at the beginning, at the end,
or anywhere in the middle. When a fixture is assigned a DMX address
of 1, the DMX controller knows to send DATA assigned to address 1
to that unit, no matter where it is located in the DMX chain.

Data Cable (DMX Cable) Requirements (For DMX Operation):

The Entour Haze Pro can be controlled via DMX-512 protocol. The Entour
Haze Pro has 3 DMX channel modes, 1 channel, 2 channel, and 4 chan­nel. The DMX address is set on the back panel. Your unit and your DMX
controller require a standard 3-pin XLR connector
for data input and data output (Figure 1). We recom­mend Accu-Cable DMX cables. If you are making
your own cables, be sure to use standard 110-120
Ohm shielded cable (This cable may be purchased
at almost all pro lighting stores). Your cables should
be made with a male and female XLR connector on
either end of the cable. Also remember that DMX

cable must be daisy chained and cannot be split.

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 4 ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 5

Figure 1

Notice: Be sure to follow gures two and three when making your own

cables. Do not use the ground lug on the XLR connector. Do not con­nect the cable’s shield conductor to the ground lug or allow the shield
conductor to come in contact with the XLR’s outer casing. Grounding
the shield could cause a short circuit and erratic behavior.

COMMON

1

DMX512 IN

3

3-PIN XLR

2

Figure 2

XLR Pin Conguration

1 Ground

Pin 1 = Ground

Pin 2 = Data Compliment (negative)

Pin 3 = Data True (positive)

When longer runs of cable are

Figure 4

Pin 1

Pin 2

Pin 3

Do Not Use

Do Not Use

XLR Male Socket

1 Ground

DMX512 OT

3-PIN XLR

2 Cold

3 Hot

1

3

2

DMX +

DMX -

XLR Female Socket

2 Cold

3 Hot

Figure 3

Special Note: Line Termination.

used, you may need to use a terminator on the last unit to avoid erratic
behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is con­nected between pins 2 and 3 of a male XLR connector (DATA + and
DATA -). This unit is inserted in the female XLR connector of the last
unit in your daisy chain to terminate the line. Using a cable terminator
(ADJ part number Z-DMX/T) will decrease the possibilities of erratic
behavior.

5-Pin XLR DMX Connectors.

512 data cables for DATA transmission in place of 3-pin. 5-pin DMX
xtures may be implemented in a 3-pin DMX line. When inserting stan­dard 5-pin data cables in to a 3-pin line a cable adaptor must be used,
these adaptors are readily available at most electric stores. The chart
below details a proper cable conversion.

Conductor 5-Pin XLR Male (In)3-Pin XLR Female (Out)

Ground/Shield

Data Compliment (- signal)

Data True (+ signal)

Not Used

Not Used

Termination reduces signal errors and

1

avoids signal transmission problems

3

and interference. It is always advisable

2

to connect a DMX terminal, (Resistance
120 Ohm 1/4 W) between PIN 2 (DMX-)

Some manufactures use 5-pin DMX-

3-Pin XLR to 5-Pin XLR Conversion

Pin 1

Pin 2

Pin 3

Entour Haze Pro Layout

Entour Haze Pro Dimensional Drawing

A. Flight case
B. Visible liquid level window with

blue LED

C. Smoke outlet (Liquid inlet)
D. Stopper
E. Direction turntable with magnet
F. LCD display
G. 6 Function Buttons
H. DMX 5 pin XLR output

I. DMX 5 pin XLR input
J. DMX 3 pin XLR output
K. DMX 3 pin XLR input
L. Power input
M. Fuse Holder
N. Power Switch
O. Wire storage belt
P. Drain valve
Q. Sponge

14.96”/380mm

20.86”/530mm

14.96”/380mm

Entour Haze Pro General Set-Up

1. Open the shipping carton and carefully remove the unit from the shipping

carton.

2. Be sure to remove all the packing material especially around the nozzle.

3. Set the haze machine on a flat dry surface and fill the fluid reservoir
through the haze outlet which also is the liquid inlet. Use American DJ
brand HAZE/G juice. DO NOT OVERFILL. Make sure the liquid level does
not exceed the maximum fluid level mark on the front of the haze.

4. Plug the unit in to a matching power supply.

5. Follow the operating instructions on the next pages for proper operation.

NOTE: When refilling, please wait 5 min. enabling all haze liquid to fill the
tank entirely prior to switching on.’

NOTE: When makiing short-range movement, please apply the supplied stopper
to prevent oil spill.

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 6 ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 7

Warming

Up……

DMX set

Addr- xxx

Entour Haze Pro Start Up Entour Haze Pro Control Panel

START UP:

1. Connect the provided locking power cable to the haze machine
input. Then plug the power cord into a matching power source.
There is no ON/OFF switch.

FUNCTION BUTTON - Press this button to cycle between DMX addressing,
fan adjustment, duration adjustment, and interval adjustment. Use the UP
and DOWN buttons to make your desired adjustments.

UP BUTTON - Use this button to make adjustments to DMX addressing,
DMX channel mode, duration setting, and interval setting.

DOWN BUTTON - Use this button to make adjustments to DMX addressing,
DMX channel mode, duration setting, and interval setting.

TIMER ON/OFF BUTTON - Press this button to activate/deactivate the timer
function.

2. Primary power is now “On”.

Version:

1.0

3. 2 Seconds after power is applied the display
will show the following screen.

DMX set

Addr - 1

NOTE: There is no warm up time. The unit can operate right
away.

HOLD BUTTON - Press this button for continuous haze output.

MANUAL BUTTON - Press and hold this button manual haze output.

Release the button to stop haze output. This function will override any state
of operation that is currently running.

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 8 ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 9

Entour Haze Pro Operation

Version:

1.0

Warming

Up……

DMX set

Addr- xxx

--> Dura xxx
Intv xxx

Dura xxx

--> Intv xxx

Warming

Up……

DMX set

Addr- xxx

Dura xxx

--> Intv xxx

DMX set

Addr- xxx

Version:

1.0

Warming

Up……

DMX set

Addr- xxx

DUR. xxx

INT. xxx

--> Dura xxx
Intv xxx

Dura xxx

--> Intv xxx

(Stop)

Cleaning

DMX set

Addr- xxx

Haze On

Fan xxx

Haze On

Fan xxx

Entour Haze Pro Operation

TIMER OPERATION:

1. Press the TIMER button to enter the haze

timer operation.

DUR. xxx

INT. xxx

2. Press the FUNCTION button to enter the timer settings menu.

3. Use the UP or DOWN buttons to adjust

--> Dura xxx

duration (output) time, 3s-250s.

Intv xxx

4. Press the FUNCTION button to switch to interval adjustment.

5. Use the UP or DOWN buttons to adjust
interval (pause) time, 5s-250s.

6. Press the TIMER button again to activate the
timer function. Press the TIMER button
again to deactivate the timer function.

7. When the timer has been stopped, the
DMX display will show.

Dura xxx

--> Intv xxx

DUR. xxx

INT. xxx

DMX set

Addr- xxx

NOTE: When using timer operation, you are able to press the
“MANUAL” button to switch to continuous hazing.

CONTINUOUS HAZING:

1. Press the HOLD button to start continuous
hazing. NOTE: Hazing will start right

Haze On

Fan xxx

away.

2. Use the UP or DOWN buttons to adjust
Fan speed, 5%-100%.

Haze On

Fan xxx

3. Press the HOLD button again to stop continuous hazing.

4. When continuous hazing is the stopped, the
display will revert back to the DMX display.

DMX set

Addr - xxx

NOTE: When using continuous hazing, you are able to press the
“TIMER” button to switch to timed hazing directly.

MANUAL HAZING:

1. Press the MANUAL button (without releas­ ing). The machine will output at maximum
level and maximum fan speed. Release the

Manual

Haze F100

button to stop hazing.

When using the timer operation, you can press “MANUAL” to
switch to manual hazing directly. Manual hazing can be started
under any operation.

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 10 ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 11

2. When manual hazing is stopped, the
display will revert back to the DMX display.

DMX set

Addr- xxx

Entour Haze Pro DMX Mode

DMX set

Addr- xxx

Dura xxx

--> Intv xxx

DMX set

Addr- xxx

Vol xxx

--> Fan xxx

Manual

V100 F100

DMX set

Addr- xxx

Warming

Up……

DMX set

Addr- xxx

--> Dura xxx
Intv xxx

Dura xxx

--> Intv xxx

(Stop)

Cleaning

DMX set

Addr- xxx

--> Vol xxx

Fan xxx

Vol xxx

--> Fan xxx

DMX set

Addr- xxx

Manual

V100 F100

*Hold

TimeSet

DMX set

Addr- xxx

4ch.Axxx
VxxxFxxx

Version:

1.0

Warming

Up……

DMX set

Addr- xxx

DUR. xxx

INT. xxx

--> Dura xxx
Intv xxx

Dura xxx

--> Intv xxx

DUR. xxx

INT. xxx

(Stop)

Cleaning

DMX set

Addr- xxx

--> Vol xxx

Fan xxx

--> Vol xxx

Fan xxx

Vol xxx

--> Fan xxx

(Stop)

Cleaning

DMX set

Addr- xxx

Manual

V100 F100

DMX set

Addr- xxx

*Hold

TimeSet

DMX set

Addr- xxx

2ch.Axxx

VxxxFxxx

4ch.Axxx
VxxxFxxx

Version:

1.0

Warming

Up……

DMX set

Addr- xxx

DUR. xxx

INT. xxx

--> Dura xxx
Intv xxx

Dura xxx

--> Intv xxx

DUR. xxx

INT. xxx

(Stop)

Cleaning

DMX set

Addr- xxx

--> Vol xxx

Fan xxx

--> Vol xxx

Fan xxx

Vol xxx

--> Fan xxx

(Stop)

Cleaning

DMX set

Addr- xxx

Manual

V100 F100

DMX set

Addr- xxx

*Hold

TimeSet

DMX set

Addr- xxx

1ch.Axxx

VxxxFxxx

2ch.Axxx

VxxxFxxx

4ch.Axxx
VxxxFxxx

4ch.Axxx

VxxxFxxx

Entour Haze Pro 1 Channel Mode

DMX Mode:

The Entour Haze Pro has 3 DMX channel modes; 1 channel
mode, 2 channel mode, and 4 channel mode. See page 13 for
the DMX traits.

1. This function will allow you to control each individual fix-
ture’s traits with a standard DMX 512 controller.

2. When the display is showing the DMX setting screen, use
the UP or DOWN buttons to find your desired DMX address.

DMX set

Addr- xxx

3. To run your fixture in DMX mode you must FIRST plug in the
fixture via the XLR connections to any standard DMX
controller.

4. Once you have the controller connected to the unit you will
be able to select your desired DMX channel mode. Press the
FUNCTION button to cycle through the DMX channel

modes.

1ch.Axxx

VxxxFxxx

2ch.Axxx

VxxxFxxx

4ch.Axxx

VxxxFxxx

5. When 4 channel mode is selected, after about 5 seconds the
screen will change to the display shown below.

VxxxFxxx

• A = The current DMX address

DxxxIxxx

• V = The current output volume

• F = The current fan speed

• D = The current duration setting

• I = The current interval setting
NOTE: Duration and Interval control is only available in
4 Channel mode.

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 12 ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 13

Channel Value Function

1 OUTPUT VOLUME & FAN SPEED

0 - 4 NO OUTPUT VOLUME
5% FAN SPEED
5 - 255 100% OUTPUT VOLUME
100% FAN SPEED

Entour Haze Pro 2 Channel Mode

Channel Value Function

1 OUTPUT VOLUME
0 - 4 NO OUTPUT VOLUME
5 - 255 100% OUTPUT VOLUME
2 FAN SPEED
0 - 15 5% FAN SPEED
16 - 255 6%-100% FAN SPEED

Note: In 2 channel mode, when using channel 1 only, the default
fan speed is 30%.

Entour Haze Pro 4 Channel Mode

Channel Value Function

1 OUTPUT VOLUME
0 - 4 NO OUTPUT VOLUME
5 - 255 100% OUTPUT VOLUME
2 FAN SPEED
0 - 15 5% FAN SPEED
16 - 255 6%-100% FAN SPEED
3 DURATION
0 - 7 3 SECONDS
8 - 255 3-250 SECONDS
4 INTERVAL
0 - 9 0 SECONDS

10 - 255 5-250 SECONDS
Note: In 4 channel mode, when using channel 1 only, the default
fan speed is 30%.

Entour Haze Pro Maintenance

Entour Haze Pro Fuse Replacement

Before doing maintenance, please make sure that the power is off,
and the power cord is unplugged.
The maintenance should be done by a qualified person.

1. Avoid heavy output.

2. Do not let the fluid get dirty.

3. Prolonged use, flight case side air filter can accumulate dust,

periodically remove the flight case side cover and remove the air

filter to do the cleaning, after cleaning, be sure to dry the air filter

after replacing the flight case again.

4. Clean the directional fan blower regularly.

5. Prolonged use, sponge under the turntable of smoke outlet may
accumulate oil, periodically cleaned out or replaced with a new

sponge.

6. Never operate the unit upside down. Do not store the unit upside
down.

7. Never mix oil based haze fluid and water based fog fluid.

Entour Haze Pro Trouble Shooting

Power Connected but no haze is emittied:

1. Check the power supply. Plug the unit into grounded power supply
socket with proper voltage.

Unplug the unit from any power source it may be connected to. Once
the power has be disconnected, use a flat head screw driver to unscrew
the fuse holder located above the power switch. Remove the bad fuse
and replace with a new one, and screw the fuse holder back in.

Entour Haze Pro Warranty Registration

The Entour Haze Pro carries a one year (365 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) number.
The R.A. number must be clearly written on the outside of the return
package. A brief description of the problem as well as the R.A. num­ber must also be written down on a piece of paper and included in
the shipping container. If the unit is under warranty, you must provide
a copy of your proof of purchase invoice. You may obtain a R.A. num­ber by contacting customer support at [phone].

Entour Haze Pro Storage

When storing your machine be sure to store it in a cool area. Cover
the machine so that dust does not build up on the unit. Only run
oil based Haze juice through your machine. Never run plain water,
vinegar, or any other liquid solution through your machine. Running
anything other then oil based Haze juice will severly damage your

machine.

2. Disconnect haze machine from power supply. Replace fuse with

one of the same type.

3. Make sure there is sufficient fluid in the tank

4. Make sure the atomization head is not blocked or damaged.

5. Make sure your controller is connected correctly.

6. Check your DMX address setting.

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 14

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 15

Entour Haze Pro Warranty

MANUFACTURER’S LIMITED WARRANTY

A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products
to be free of manufacturing defects in material and workmanship for a prescribed period from
the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the
product is purchased within the United States of America, including possessions and
territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable
evidence, at the time service is sought.

B. For warranty service you must obtain a Return Authorization number (RA#)
before sending back the product–please contact ADJ Products, LLC Service Department
at 800-322-6337. Send the product only to the ADJ Products, LLC factory. All
shipping charges must be pre-paid. If the requested repairs or service (including
parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return
shipping charges only to a designated point within the United States. If the entire instrument is
sent, it must be shipped in it’s original package. No accessories should be shipped with the product. If
any accessories are shipped with the product, ADJ Products, LLC shall have no liability whatsoever for
loss of or damage to any such accessories, nor for the safe return thereof.

C. This warranty is void if the serial number has been altered or removed; if the product is modified in any
manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the
product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior
written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because
not properly maintained as set forth in the instruction manual.

D. This is not a service contract, and this warranty does not include maintnance, cleaning or periodic check
up. During the period specified above, ADJ Products, LLC will replace defective parts at its expense
with new or refurbished parts, and will absorb all expenses for warranty service and repair labor by
reason of defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this
warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole
discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August
15, 2012, and bear indentifying marks to that effect.

E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products
without any obligation to include these changes in any products theretofore manufactured.

No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with
products described above. Except to the extent prohibited by applicable law, all implied warranties made
by ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness,
are limited in duration to the warranty period set forth above. And no warranties, whether expressed or
implied, including warranties of merchantability or fitness, shall apply to this product after said period
has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is
expressly provided above; and under no circumstances shall ADJ Products, LLC be liable for any loss or
damage, direct or consequential, arising out of the use of, or inability to use, this product.

This warranty is the only written warranty applicable to ADJ Products, LLC Products and
supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore
published.

MANUFACTURER’S LIMITED WARRANTY PERIODS:

 •NonL.E.D.LightingProducts=1-year(365days)LimitedWarranty(Such as: Special Effect

Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par
Cans, Trussing, Lighting Stands etc. excluding LED and lamps)

 •LaserProducts=1Year(365Days)LimitedWarranty(excluding laser diodes which have a 6 month

limited warranty)

 •L.E.D.Products=2-year(730days)LimitedWarranty(excluding batteries which have a 180 day lim-

ited warranty). Note:2YearWarrantyonlyappliestopurchaseswithintheUnitedStates.

 •StarTecSeries=1YearLimitedWarranty(excluding batteries which have a 180 day limited warranty).

•ADJDMXControllers=2Year(730Days)LimitedWarranty

Entour Haze Pro Notes

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 16 ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 17

Entour Haze Pro Specifications

MODEL - Entour Haze Pro

VOLTAGE*: 120V/60Hz or 230V/50Hz
POWER CONSUMPTION: 420W (Min.)

660W (Max.)

WEIGHT: 68 Lbs. / 31 Kgs
DIMENSIONS: 14.96" x 20.86” x 14.96”

380 x 530 x 380mm
FUSE: 10A (120V)
5A (230V, 240V)

TANK CAPACITY: 2.5 Liter
OUTPUT: 3,000 cubic feet per minute (With Fan

and Volume Full On)

FLUID CONSUMPTION: 50 (ml/h)
FLUID TYPE: Oil Based American DJ Haze Juice
DMX CHANNELS: 3 DMX Channel Modes: 1/2/4
DUTY CYCLE: Not to exceed 6 hours turned on.

*Voltage is preset at the factory and may not be changed

ADJ Products, LLC - www.adj.com - Entour Haze Pro Instruction Manual Page 18

ADJ Products, LLC

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: [phone] / Fax: [phone]

Web: www.adj.com / E-mail: [e-mail]

A.D.J. Supply Europe B.V.

Junostraat 2

6468 EW Kerkrade

Netherlands

[e-mail] / www.adj.eu

Tel: [phone] / Fax: [phone]