ADJ Crazy Pocket 8 Operation Manual
User Instructions
A.D.J. Supply Europe B.V.
Junostraat 2
6468 EW Kerkrade
The Netherlands
www.americandj.eu
1/16
©2016 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and instructions
herein are subject to change without notice. ADJ Products, LLC logo and identifying product names and
numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms and
matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter
granted. Product names used in this document may be trademarks or registered trademarks of their respective
companies and are hereby acknowledged. All non-ADJ Products, LLC brands and product names are
trademarks or registered trademarks of their respective companies.
ADJ Products, LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment,
building, and electrical damages, injuries to any persons, and direct or indirect economic loss associated with
the use or reliance of any information contained within this document, and/or as a result of the improper,
unsafe, unsufficient and negligent assembly, installation, rigging, and operation of this product.
A.D.J. Supply Europe B.V. – www.americandj.eu – CRAZY POCKET 8 User Instructions Page 2
Contents
GENERAL INFORMATION ........................................................................................................................................................ 4
GENERAL INSTRUCTIONS ........................................................................................................................................................ 4
FEATURES ................................................................................................................................................................................ 4
HANDLING PRECAUTIONS ....................................................................................................................................................... 4
SAFETY PRECAUTIONS ............................................................................................................................................................ 4
DMX SET UP ............................................................................................................................................................................ 5
DIMENSIONS ........................................................................................................................................................................... 6
REAR LAYOUT & FUNCTIONS .................................................................................................................................................. 7
SYSTEM MENU ........................................................................................................................................................................ 8
OFFSET SUBMENU ................................................................................................................................................................ 11
OPERATION ........................................................................................................................................................................... 11
MASTER-SLAVE CONFIGURATION ......................................................................................................................................... 12
UC IR CONTROL ..................................................................................................................................................................... 12
1 CHANNEL MODE ................................................................................................................................................................ 13
9 CHANNEL MODE ................................................................................................................................................................ 13
17 CHANNEL MODE .............................................................................................................................................................. 14
21 CHANNEL MODE .............................................................................................................................................................. 15
PHOTOMETRIC CHART .......................................................................................................................................................... 17
DIMMER CURVE CHART ........................................................................................................................................................ 17
FUSE REPLACEMENT ............................................................................................................................................................. 17
CLEANING.............................................................................................................................................................................. 17
TROUBLE SHOOTING ............................................................................................................................................................. 18
SPECIFICATIONS .................................................................................................................................................................... 18
ROHS - A great Contribution to the Conservation of Environment ..................................................................................... 19
WEEE – Waste of Electrical and Electronic Equipment ........................................................................................................ 19
A.D.J. Supply Europe B.V. – www.americandj.eu – CRAZY POCKET 8 User Instructions Page 3
INOZIONE
GENERAL INFORMATION
Unpacking: Thank you for purchasing the Crazy Pocket 8 by ADJ Products, LLC. Every Crazy Pocket 8 has
been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping
carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully
inspect your fixture for any damage and be sure all equipment necessary to operate the unit has arrived intact.
In the event damage has been found or parts are missing, please contact our toll free customer support
number for further instructions. Please do not return this unit to your dealer without contacting customer
support first.
Introduction: The ADJ Crazy Pocket 8 creates exciting lighting effects with it’s 8 quick sweeping beams and
it’s dual 4-zone LEDs. The Crazy Pocket 8 can operate as a stand alone fixture or in a Master/Slave
configuration. The Crazy Pocket 8 has three operating modes; sound active mode, show mode, and DMX
control. This fixture is suitable for theaters, studios, retail stores, and other similar locations. For best results
use fog or special effects smoke to enhance the beams projections.
Customer Support: If you encounter any problems, please contact your trusted American Audio shop.
We also offer the possibility, to contact us directly: You can contact us via our website www.americandj.eu or
via email: support@americandj.eu
Warning! To prevent or reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
Warning! This may cause severe eye damage. Avoid looking directly into the light source at all times!
GENERAL INSTRUCTIONS
To optimize the performance of this product, please read these operating instructions carefully to familiarize
yourself with the basic operations of this unit. These instructions contain important safety information regarding
the use and maintenance of this unit. Please keep this manual with the unit, for future reference.
FEATURES
• Multi-Colors
• 3 Operating Modes - Sound Active, Show Mode, and DMX Control
• 4 DMX Channel Modes (1 Channel Mode, 9 Channel Mode, 17 Channel Mode, & 21 Channel Mode)
• Stand Alone or Master-Slave Setup
• Internal Microphone
• Digital Display for Address and Function Setting
• UC IR Remote Compatible (Not Included) & Airstream IR Compatible (Transmitter Included)
HANDLING PRECAUTIONS
Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself, doing so will
void your manufactures warranty. In the unlikely event your unit may require service please contact ADJ
Products, LLC.
ADJ Products, LLC will not accept any liability for any resulting damages caused by the non-observance of this
manual or any unauthorized modification to this unit.
SAFETY PRECAUTIONS
For Your Own Personal Safety, Please Read and Understand This Manual Completely Before You
Attempt To Install Or Operate This Unit!
• To reduce the risk of electrical shock or fire, do not expose this unit rain or moisture.
• Do not spill water or other liquids into or on to your unit.
• Be sure that the local power outlet match that of the required voltage for your unit.
• Do not attempt to operate this unit if the power cord has been frayed or broken.
• Do not attempt to remove or break off the ground prong from the electrical cord. This prong is used to reduce
the risk of electrical shock and fire in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user serviceable parts inside.
A.D.J. Supply Europe B.V. – www.americandj.eu – CRAZY POCKET 8 User Instructions Page 4
SAFETY PRECAUTIONS (continued)
Figure 1
• Never operate this unit when it’s cover is removed.
• Always be sure to mount this unit in an area that will allow proper ventilation. Allow about 6” (15cm) between
this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product outdoors voids all warranties.
• Always mount this unit in safe and stable matter.
• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.
• Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See page 17 for
cleaning details.
• Heat –This fixture should be situated away from heat sources such as radiators, heat registers, stoves, or
other appliances (including amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. Objects have fallen, or liquid has been spilled into the appliance.
B. The appliance has been exposed to rain or water.
C. The appliance does not appear to operate normally or exhibits a marked change in performance.
DMX SET UP
Power Supply: The ADJ Crazy Pocket 8 contains a electronic voltage switch, which will auto sense the
voltage when it is plugged into the power source. With this switch there is no need to worry about the correct
power voltage, this unit can be plugged in anywhere.
DMX-512: DMX is short for Digital Multiplex. This is a universal protocol used by most lighting and controller
manufactures as a form of communication between intelligent fixtures and controllers. A DMX controller sends
DMX data instructions from the controller to the fixture. DMX data is sent as serial data that travels from fixture
to fixture via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX fixtures (most controllers only
have a DATA “OUT” terminal).
DMX Linking: DMX is a language allowing all makes and models of different manufactures to be linked
together and operate from a single controller, as long as all fixtures and the controller are DMX compliant. To
ensure proper DMX data transmission, when using several DMX fixtures try to use the shortest cable path
possible. The order in which fixtures are connected in a DMX line does not influence the DMX addressing. For
example; a fixture assigned a DMX address of 1 may be placed anywhere in a DMX line, at the beginning, at
the end, or anywhere in the middle. Therefore, the first fixture controlled by the controller could be the last
fixture in the chain. When a fixture is assigned a DMX address of 1, the DMX controller knows to send DATA
assigned to address 1 to that unit, no matter where it is located in the DMX chain.
Data Cable (DMX Cable) Requirements (For DMX and Master/Slave Operation): The
Crazy Pocket 8 can be controlled via DMX-512 protocol. The Crazy Pocket 8 has 4 DMX
Channel Modes. The DMX address is set electronically using the controls on the front
panel of the unit. Your unit and your DMX controller require a approved DMX-512 110
Ohm Data cable for data input and data output (Figure 1). We recommend Accu-Cable
DMX cables. If you are making your own cables, be sure to use standard 110-120 Ohm
shielded cable (This cable may be purchased at almost all professional sound and
lighting stores). Your cables should be made with a male and female XLR connector on
either end of the cable. Also remember that DMX cable must be daisy chained and cannot be split.
A.D.J. Supply Europe B.V. – www.americandj.eu – CRAZY POCKET 8 User Instructions Page 5
XLR Pin Configuration
Pin1 = Ground
Pin2 = Data Compliment (negative)
Pin3 = Data True (positive)
Termination reduces signal errors and avoids signal
transmission problems and interference.
It is always advisable to connect a DMX terminal,
(Resistance120 Ohm 1/4 W) between PIN 2 (DMX-) and PIN 3
(DMX +) of the last fixture.
Figure 4
3-Pin XLR to 5-Pin XLR Conversion
Conductor
3-pin XLR Female (Out)
5-pin XLR Male (In)
Ground/Shield
Pin 1
Pin 1
Data compliment (- signal)
Pin 2
Pin 2
Data True (+ signal)
Pin 3
Pin 3
Not used Pin 4 - Do Not Use
Not used Pin 5 - Do Not Use
Figure 2
DMX SET UP (continued)
Notice: Be sure to follow figures two and three when making your own cables. Do not use the ground lug on
the XLR connector. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor
to come in contact with the XLR’s outer casing. Grounding the shield could cause a short circuit and erratic
behavior.
Figure 3
Special Note: Line Termination. When longer runs of cable are used, you may need to use a terminator on
the last unit to avoid erratic behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is connected
between pins 2 and 3 of a male XLR connector (DATA + and DATA -). This unit is inserted in the female XLR
connector of the last unit in your daisy chain to terminate the line. Using a cable terminator (ADJ part number
Z-DMX/T) will decrease the possibilities of erratic behavior.
5-Pin XLR DMX Connectors. Some manufactures use 5-pin DMX-512 data cables for DATA transmission in
place of 3-pin. 5-pin DMX fixtures may be implemented in a 3-pin DMX line. When inserting standard 5-pin
data cables in to a 3-pin line a cable adaptor must be used, these adaptors are readily available at most
electric stores. The chart below details a proper cable conversion.
DIMENSIONS
A.D.J. Supply Europe B.V. – www.americandj.eu – CRAZY POCKET 8 User Instructions Page 6
Loading...