BuBBletron Go
©2015 ADJ Products, LLC all rights reserved. Information,
specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all aliated companies hereby disclaim any and all liabilities for property, equipment, building,
and electrical damages, injuries to any persons, and direct or
indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a
result of the improper, unsafe, unsucient and negligent assembly, installation, rigging, and operation of this product.
12/15
User Instructions
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
Bubbletron Go Introduction
Bubbletron Go General Instructions
Unpacking:
Thank you for purchasing the Bubbletron Go by ADJ Products, LLC.
Every Bubbletron Go has been thoroughly tested and has been shipped
in perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears
to be damaged, carefully inspect your xture for any damage and be
sure all accessories necessary to operate the unit have arrived intact.
In the event damage has been found or parts are missing, please contact our toll free customer support number for further instructions.
Please, do not return this unit to your dealer without rst contacting
customer support.
Instructions:
The Bubbletron Go is a portable battery powered bubble machine
capable of creating hundreds of bubbles a minute. This unit comes
with a wired On/O remote control with a 25ft. cable. To optimize the
performance of this product, please read these operating instructions
carefully to familiarize yourself with the basic operations of this unit. Be
sure you understand these instructions completely before attempting
to operate this unit.
Customer Support:
ADJ provides a toll free customer support line, to provide set up and
installation help and to answer any question should you encounter
problems during your set up or initial operation. You may also visit us
on the web at www.adj.com for any comments or suggestions. Toll
free customer service hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2610
E-mail: support@americandj.com
To purchase parts online visit http://part.americandj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt to make any type of repair yourself without the manufactures
consent, doing so will void your manufactures warranty. In the unlikely
event your unit may require service please contact ADJ customer support for further instructions.
ADJ Products, LLC - www.adj.com - Bubbletron Go Instruction Manual Page 2
Please carefully read and understand the instructions in this manual
thoroughly before attempting to operate this unit. These instructions
contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future
reference.
Bubbletron Go Safety Precautions
• Keep the outside of this device dry at all times. Do not spill water
or other liquids into or on to your unit. Be sure all bubble juice is
kept inside the uid tray! To prevent re or shock hazard, do not
expose this product to rain or moisture.
• Do not spill water or other liquids into or on to your unit
• Do not attempt to operate this unit if the power cord has been fray ed or broken. Do not attempt to remove or break o the ground
prong from the electrical cord. This prong is used to reduce the risk
of electrical shock and re in case of an internal short
• Disconnect from main power before making any type of connection
• Do not remove the cover under any conditions. There are no user
serviceable parts inside
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall
• Do not attempt to operate this unit, if it becomes damaged
• This unit is intended for indoor use only, use of this product out doors voids all warranties
• During long periods of non-use, disconnect the unit’s main power
• Always mount this unit in safe and stable matter
• Power cords should be routed so they are not likely to be walked
on, pinched by items placed upon or against them.
• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (in cluding ampliers) that produce heat.
• The xture should be serviced by qualied service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The unit has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a
marked change in performance.
ADJ Products, LLC www.adj.com Bubbletron Go Instruction Manual Page 3